Jim W
12-06-2005, 06:56 AM
Hello everyone,
Last spring I bought a Hallett flatty with a freshly rebuilt 396 BBC. The engine still has the original dist. weiand tunnel ram, 660 Holleys and hyd. cam, boat runs on pump gas.
I need
1--solid lifter cam and lifters. A matching set of springs would be nice.
2-- a oval port intake. Something like a Edelbrock Performer RPM air gap or Victor JR.
3--Holley or BG 750 or so CFM carb.
Before I go to E-Bay or whatever I thought I would shake the Hot Boat bushes for used parts and see what comes out???
Thanks in advance, Jim
Last spring I bought a Hallett flatty with a freshly rebuilt 396 BBC. The engine still has the original dist. weiand tunnel ram, 660 Holleys and hyd. cam, boat runs on pump gas.
I need
1--solid lifter cam and lifters. A matching set of springs would be nice.
2-- a oval port intake. Something like a Edelbrock Performer RPM air gap or Victor JR.
3--Holley or BG 750 or so CFM carb.
Before I go to E-Bay or whatever I thought I would shake the Hot Boat bushes for used parts and see what comes out???
Thanks in advance, Jim