2000 25' daytona prop

[MACHINEHEAD]

904 HP at the flywheel ,1.5 gear, currently on the 6000 rpm limiter at 108 with 65% throtle opening. Crazy! Box stock Bravo 4 blade 32. Customers boat, need to get something for next weekend! 34? 29 Max? 33lab? Oh yea, Imco SC. I just plain got the wrong prop for him.

[gmocnik]

welcome to try a 32p rh 5 blade hering i have for sale. used it on my 25 then changed gear ratio. prop is in so cal, but will be in havasu memorial...
give me a call
gary
949.433.0413

[dicudmore]

904 HP at the flywheel ,1.5 gear, currently on the 6000 rpm limiter at 108 with 65% throtle opening. Crazy! Box stock Bravo 4 blade 32. Customers boat, need to get something for next weekend! 34? 29 Max? 33lab? Oh yea, Imco SC. I just plain got the wrong prop for him.
you may need to change gear ratio to find a prop for that...
can't go much bigger than 32 can ya??

[pleasantcat]

i had a 25 daytona 950+hp high "x" ran a 30 p5x hydromotive prop to 118 mph @ 6700rpm 1:50 gears

[3:30dirty]

i had a 25 daytona 950+hp high "x" ran a 30 p5x hydromotive prop to 118 mph @ 6700rpm 1:50 gears
25 single step high "x" ,1000hp, 30p bluprinte bravo....110mph at 3/4 throttle, about 6100 rpm. 32 is a big prop for that boat.

[JustDawn]

...Not trying to hijack this thread,but after reading the responses I have a question.
I have a 25 Eliminator Eagle,blown 510,stand off box, 1.50 gears and I'm spinning a32p labbed Bravo 1.(high X dim)
Even with the 32 the boat rolls on plane easily(2 people 3/4 tank fuel)
Poker run weekend I was running 4500 rpm's speedo (gaffrig L/F) showed mid 80's...is that right?
Just curious as to what the slip # is?
I've been told that the larger the prop the less efficient...
I have a 30p we use in the heat of summer...should I change gears and go with a smaller wheel?
thanks...PlayDeep.

[convincor]

25 single step high "x" ,1000hp, 30p bluprinte bravo....110mph at 3/4 throttle, about 6100 rpm. 32 is a big prop for that boat.
What gear ratio do you have?

[MACHINEHEAD]

The 32 does start to push the thing around a little. I think a re gear and a 28 may be the better way to go. The customer really likes the accel. with 6 people and fully loaded. Hes kind of like f it . But I really want to see what the thing will do! Thanks to GRASS PAYS for the 33.5 bravo 4. Elsinore monday? Thanks you guys

[pleasantcat]

if you built the engine to turn some rpms then leave the gearing at 1/50 and have awesome acceleration with the 30p5x from hydromotive. my daytona was so solid at all speeds with that setup.