PDA

View Full Version : CP tunnel ready for racing



cyclone
05-30-2006, 05:24 PM
1985 California Performance 18 ft. tunnel "HEAD OVER HEELS" one of the best jets around, many record and wins, always runs hard all new interior and rigging, everything new in 2004 all new MSD ignition system, with launch control all new Barry Grant Fuel system Berkley Pump, stainless impellor, with inducer Mills pop off (the one that works every time) Spare hardware and loaders Boat runs consistent 8.80's at 114-115 with 200+ lb driver BOAT FEATURED IN HOT BOAT JUNE 2004 ENGINE 475 cubic inch chevrolet 1195 King Demon Wilson cnc super victor AFR cyl heads with Jessel rockers All Comp Cams roller valve Train JE pistons Scat Pendulum cut lightweight crank H beam steal con rods Moroso alum pan with kick out Moroso crank scraper and pump Moroso vacuum pump Msd crank trigger and dist TCI balancer More good stuff I cant Remember Present combo, fresh and ready 900 H.P. @ 7600 ENGINE FEATURED IN CAR CRAFT MAGAZINE
$20,000.00 takes it
Support equipment, E-Z up, Pit Scooter Lifeline chute jacket, Helmet and spare parts also available.
GO RACE NEXT WEEKEND
CONTACT
STEVE BRULEĀ’
1-915-817-0955 HOME
1-915- 685-4767 Work
Steve.brule@sbcglobal.net
Steve@westechperformance.com
http://www.***boat.com/image_center/data/520/45outside-med.jpg
http://www.***boat.com/image_center/data/520/45inside-med.jpg
http://www.***boat.com/image_center/data/520/45pump-med.jpg
http://www.***boat.com/image_center/data/520/45fuel_system-med.jpg
http://www.***boat.com/image_center/data/520/45outside2-med.jpg

TRG
05-30-2006, 05:32 PM
That really BLOWS!
somebody is going to be getting into a real nice piece!
So Steve's getting a "POONTOON" ey?
Todd

Cs19
05-30-2006, 08:16 PM
Thats a freaking steal !!!!!!!!! it wont last at that price, hopefully someone local buys it and it doesnt go to far away.