PDA

View Full Version : *** SPAM *** For Sale: Clean, Bagged, 1999 S-10 ***



Rompn
05-31-2006, 09:35 AM
Up for sale is my daily driven, extremely clean and maintained, peweter 99', ext. cab, 4cyl., 5 speed, 2WD, S-10.
*** Engine ***
* 2.2L, 152,000 miles
* K&N Intake
* Al's Header
* NEW Alternator (Preventative Maintenance)
* NEW Waterpump (Preventative Maintenance)
* NEW Optima Deep Cycle Battery
* NEW Timing Gears & Chain (Preventative Maintenance
* Flushed Radiator (Preventative Maintenance)
*** Tranny ***
* Original From Factory
* NEW Fluid
* NEW Centerforce Stage 2 Clutch & Throw Out Bearing
*** Steering ***
* ZQ8 Steering Box
* NEW Idler Arm
* NEW Tierod's
*** Suspension ***
* Bagged: Front, Back, Side, Side
* (4) 1/2" SMC Valves (Up / Fill)
* (4) 3/8" SMC Valves (Down / Dump)
* 1/2" D.O.T. Airline
* SuicideDoors S-10 Specific Notch
* All Fittings D.O.T. Compression Style
* (2) 5 Gallon Slim Air Tanks (Colormatched & Housed In Custom Tubular Crossmember Underbed)
* All Wiring Soldered, Heatshrinked & In Loom
* (4) Airlift 2B7 Airbags
* SuicideDoors Front Cups
* SuicideDoors Shock Relocator Kit (Front)
* KP 6 Link Kit (Rear)
* SuicideDoors Engine Driven Compressor Kit
*** Brakes ***
* NEW Slotted Rotors (Front)
* NEW Hawk Pads (Front)
*** Exterior ***
* Debadged
* Street Scene Side Mirrors (Colormatched)
* NEW Smooth 94-97 Style Door Handles (Colormatched)
* Billet Antenna
* Billet Grille
* NEW 4WD Lower Valance (Colormatched)
* Clear Corner Lights
* NEW Grille Shell (Painted Gloss Black)
* NEW Tailgate (Shaved & Colormatched)
* NEW GM Rollpan (Colormatched)
* 18" x 7" American Racing Torque Thrust II Rims (Front) (Custom Built To Spec's & Chromed)
* 18" x 8" American Racing Torque Thrust II Rims (Rear) (Custom Built To Spec's & Chromed)
* Soft Style Tonneau Cover
*** Interior ***
* All Factory & Complete
* Autometer Tach
* (2) 10" Sub's In Custom Box (In Ext. Cab Area)
* (2) Crunch Amp's
* All Factory Speakers Replaced With Audiobahn's
* Clarion Headunit
* Tinted Windows
* 10 Switch Clear Switch Box With Quick Disconnect (For Bags)
*** Extras (Not Installed) ***
* SuicideDoors Carrier Bearing Crossmember (Painted)
* Differential Gasket
* Pinion Seal
* Remaining Metal Work For Bed
* Extra Misc. Fittings, Etc. For Bags
* Triple Gauge Pillar Pod (Currently Being Glassed)
* (2) KP Dual Needle Air Gauges & (1) Single Needle Air Gauge (For Pillar Pod)
* U-Joint Set
* And More!
This truck has been babied BIG time. Never shifted above 3000 RPM (usually 2500 around town), always drive a set 70 MPH on the freeway and washed religiously every weekend with Zaino. The truck has also been detailed with the complete Zaino claybar system.
A few items to note... the passenger front rim was bent from a large pot hole (not shown) and is currently rolling on the donut spare. Since the rims are custom built to spec, it will be cheaper and quicker to have the rim retrued and chromed from a local repair shop. It was estimated between $175 - $250 for this. Also, the two front tires will need to be replaced since riding at different heights wore them out. They are about $110 a piece. The bed will also need to be completed. One wheel tub is in however the other one will need to be installed and the small cutout in the bed will also need to be finished. I have the metal work for all of this however I don't have the time. Please feel free to PM or e-mail me for more pictures. Sale is forced due to an upcoming wedding, house purchase and a new daily driver. Truck is located just north of downtown Los Angeles in California. Available anytime for viewing. Asking $7500 obo. Thanks!
http://i4.photobucket.com/albums/y119/Rompn/9f349cf6.jpg
http://i4.photobucket.com/albums/y119/Rompn/91a15dc4.jpg
http://i4.photobucket.com/albums/y119/Rompn/4a721cb7.jpg
http://i4.photobucket.com/albums/y119/Rompn/757c1685.jpg
http://i4.photobucket.com/albums/y119/Rompn/ff8a5021.jpg
http://i4.photobucket.com/albums/y119/Rompn/a990d6de.jpg
http://i4.photobucket.com/albums/y119/Rompn/42eaaa31.jpg
http://i4.photobucket.com/albums/y119/Rompn/S10forsale030.jpg
http://i4.photobucket.com/albums/y119/Rompn/S10forsale022.jpg

Rompn
06-06-2006, 08:08 AM
****** PRICE JUST REDUCED (6.06.06) FROM $7,500 obo TO $6,500 obo ******

Hallett19
06-06-2006, 08:27 AM
I work in La Canada and am in La Crescenta alot, I think I have seen this truck before but never knew all the work done to it. Beautiful truck man !

Rompn
06-06-2006, 08:59 AM
I work in La Canada and am in La Crescenta alot, I think I have seen this truck before but never knew all the work done to it. Beautiful truck man !
Thanks man. I have a few people interested and also a few looking to trade at the moment. I don't really want to sell it as I had planned a turbo LS1 / 6 speed swap eventually. But, I have a upcoming wedding, looking into buying a house and we also just bought a horse. Plus, I already bought another daily driver :cool: (See below).
http://i4.photobucket.com/albums/y119/Rompn/83c7a1ac.jpg

Rompn
06-23-2006, 02:10 PM
BUMP :cool:

Rompn
07-10-2006, 07:55 AM
*** PRICE REDUCED AGAIN (7.10.06), NOW ONLY $5900 obo!! ***

LAFD
07-10-2006, 08:11 AM
*** PRICE REDUCED AGAIN (7.10.06), NOW ONLY $5900 obo!! ***
where at in la cresenta are you im in sunland. bump.

Rompn
07-10-2006, 08:28 AM
where at in la cresenta are you im in sunland. bump.
I'm north of Foothill between Rosemont Blvd. and Pennsylvania Blvd. On another note, what fire station do you work at? I'm the installation and design manager over at Nida Communications, across the street from Everest Restaurant on Foothill. We do all the emergency equipement (radios, headsets, sirens, custom work, etc.) installs on engines, squads, cop cars, etc. My boss is Kevin Nida. He's the President of CSFA (California State Firefighter Association).

sofa king smooth
07-12-2006, 07:39 AM
You got a phone number?

Rompn
07-12-2006, 07:42 AM
You got a phone number?
Cell #: (818) 601-2780. Feel free to call me on my cell anytime.