Plumbing A Bbc V-drive

[SANGER-RICH]

Ok I need a diagram on the plumbing for the water for my v-drive with headers, im running a magniflow waterpump, I would appreciate any help.
Thanks in advance

[502 JET]

Take a look here:
http://www.bassettracing.com/newpage7.htm#V-Drive%20Application%20Drawing
Tee the water coming out of the pump into the blocks water pump holes.

[Kindsvater Flat]

http://www.sweetperformance.com/photos/albums/userpics/10001/70_Hallett.jpg

[SANGER-RICH]

http://www.sweetperformance.com/photos/albums/userpics/10001/70_Hallett.jpg
I need to see where it ties into your headers and the puke tube, your battery is in the way :cry:

[Kindsvater Flat]

Thats a Dave Sammons special.... He should be able to help you out.

[superdave013]

come out of the center of the intake to a dump out the boat. Then come out of another one on the intake and run it to the Basset tee valve and then to the headers. If you want to get trick you can swap out the tee valve for a Banderlog valve. Or you can just run headers dry and hot.

[superdave013]

http://www.***boat.com/image_center/data/520/9The_Dutch_Treat-med.JPG

[SANGER-RICH]

http://www.***boat.com/image_center/data/520/9The_Dutch_Treat-med.JPG
One question and this is real dumb ass one. Is there in the "braided steel line" line of hose a differance between water and fuel lines in the 8 an hose, do they handle both without detereriating, wow big word spelled wrong. Give him another beer :220v: :rollside: :p