Place Diverter O-Ring

[gregr1971]

My nozzle o-ring blew out some how, i have taken it apart, needs a new one, any ideas where i can get one by fri.????????
While i have it off, would like to modify it, but need a little guidance, as not to grind off to much. i can't droop or wedge it, it is an "E" pump.

[FLEA DIDDY]

My nozzle o-ring blew out some how, i have taken it apart, needs a new one, any ideas where i can get one by fri.????????
While i have it off, would like to modify it, but need a little guidance, as not to grind off to much. i can't droop or wedge it, it is an "E" pump.Greg try a valve company around your area, I know with all the refinerys someone should have something.

[gregr1971]

i'm about to try a trash can with this E pump!

[cave]

If you are not close to one of these companies there is always next day air with Rex or Cp Performance
CP's page (http://www.cpperformance.com/SearchResult.aspx?CategoryID=514)
Or Rex Marine's (http://www.rexmar.com/page129.html) 14.56 for the nozzle O ring

[gregr1971]

the o-ring i pulled out looks like a clear "hose" with a plastic covering, is that the correct one on rex marine website?

[Oldsquirt]

the o-ring i pulled out looks like a clear "hose" with a plastic covering, is that the correct one on rex marine website?
That sounds like the O-ring between the steering nozzle and the trim nozzle. You need the double O-ring, #425-122 for that. Same page of Rex catalog posted above.

[FLEA DIDDY]

the o-ring i pulled out looks like a clear "hose" with a plastic covering, is that the correct one on rex marine website?That's a VITON rubber O-RING, common in ball valves mainly STAINLESS STEEL BALL VALVES, I'm telling you try a valve gasket company Take the old one with you for comparison.

[gregr1971]

I'll try that tommorow flea, i hate this damn insert pump! BUT i'z gots me'z one of dem dere squirt boats!

[kp216]

Kind of like my thread here (http://www.***boat.net/forums/showthread.php?t=117973)
Does it look anything like this?
http://www.***boat.com/image_center/data/520/327Picture_003.jpg
I've got a couple coming from HTP.

[Devilman]

My nozzle o-ring blew out some how, i have taken it apart, needs a new one, any ideas where i can get one by fri.????????
While i have it off, would like to modify it, but need a little guidance, as not to grind off to much. i can't droop or wedge it, it is an "E" pump.
Hey Greg, for somebody close to you, I got one last summer from Mike's Pump & Speed. They were in Houston, but have moved to Plantersville, which is still not too far away. www.mikespumpandspeed.com or call 'em at (832)721-9760. I dealt with Danna, they had one to me in a couple of days. Around $18.00 or so then whatever shipping.... Good luck! :cool:

[gregr1971]

Kind of like my thread here (http://www.***boat.net/forums/showthread.php?t=117973)
Does it look anything like this?
http://www.***boat.com/image_center/data/520/327Picture_003.jpg
I've got a couple coming from HTP.
YEP, THAT'S IT!

[Liberator TJ1984]

Greg , and the rest of you guys :)
if your ring is messed up take it to a industrial bearing/rubber goods supply house and tell them to order you the same thing BUT in Teflon......I bought a new one from MPS for $ 18 bucks then went to the supply house and ordered 25 rings.... ( they will usually have a min.order) from them at only about $ 3ea..me and a few buddies split the costs ....now we gots plenty :idea: and always have spares for fellow boaters if the need arises........few beers for a seal ...good trade :cool:

[gregr1971]

Greg , and the rest of you guys :)
if your ring is messed up take it to a industrial bearing/rubber goods supply house and tell them to order you the same thing BUT in Teflon......I bought a new one from MPS for $ 18 bucks then went to the supply house and ordered 25 rings.... ( they will usually have a min.order) from them at only about $ 3ea..me and a few buddies split the costs ....now we gots plenty :idea: and always have spares for fellow boaters if the need arises........few beers for a seal ...good trade :cool:
want to sell one???????