Need heads

[Clearlake Kid]

Looking for a set of iron bbc heads for my wood deck Howard. I would like to find a set ready to run. Let me know guys. Thanks

[GofastRacer]

Oval, rectangular, open or closed chamber???..

[Chicken Ship]

I have a set without valves and springs. They have about 3 hrs on them new, guides and hardened seats. If you are interested let me know and I will pull the casting #s. They have been machined for double springs, oval port; I believe they are open chamber. They are in Havasu.

[Clearlake Kid]

Oval, rectangular, open or closed chamber???..It really don't matter. I already have a oval intake, but that can be changed.

[repo man]

steelcomp has some nice brodix for a reasonable price.

[pebo]

I have some in the garage. I am out of town untill Wed. Will send you some casting numbers. They came off a running BBC, oval port.

[hairysituation]

I have a set of oval port semi closed chamber heads with ss valves.They need new valve guieds and are complete.180 bucks and they are yours.

[GofastRacer]

It really don't matter.
Yes it does, what pistons do you have????

[Clearlake Kid]

Yes it does, what pistons do you have????
Flat tops.............

[Bobby Knight]

frank, i have merlin 315s w the extra head bolts, and lots of port work.l believe they flow 374 at .750. i have flow sheets at roys. one season on k motion springs, ss valves, one bent, can fix w / clean up valve job. titanium keepers and retainers. will throw in stud girdles (recommend new locks). $875 . let me know, steve

[pebo]

Have some in the garage complete. Bolt on and go. Casting #'s 3975950. Make me an offer. :)

[pebo]

GFracer will these work for his application? They came off that yellow Hondo i sold at Big River.

[GofastRacer]

Flat tops.............
In that case you don't want open chambered heads, you won't have any compression, semi closed chambers is what you need!..

[U.T.B.A.V-Drive man]

We have a set already made up, they'er @ L J 's in napa. Rectangular port, dbl spring, open chamber. If you are interested I'll give my son your phone #

[GofastRacer]

GFracer will these work for his application? They came off that yellow Hondo i sold at Big River.
Those list as open chamber, if they are 119cc's??? with flat tops he won't have any compression!..

[pebo]

Yes they are 119cc's. They were on a 12.5:1 comp. motor.
Still for sale if someone needs em.

[Clearlake Kid]

In that case you don't want open chambered heads, you won't have any compression, semi closed chambers is what you need!..
Thanks for the info, i was thinking closed chambers would work better. The short block was a old turbo motor, so it already has low compresson pistons. I just bought a new Engle turbo cam for it, now i don't need it because i'm not going to run the turbo's anymore.

[Clearlake Kid]

Alright, i need closed chamber oval port heads........Anybody have some ??? Thanks guys......

[GofastRacer]

Alright, i need closed chamber oval port heads........Anybody have some ??? Thanks guys......
I may have a set that will work, I'll check in the morning!..

[GofastRacer]

Yes they are 119cc's. They were on a 12.5:1 comp. motor.
Still for sale if someone needs em.
What do you have to get for them????..

[Clearlake Kid]

I may have a set that will work, I'll check in the morning!..Thanks ................

[Bobbo541]

I have a set of close chamber rectangle port heads off my race motor and a rectangle port tunnel ram with 2 950 holleys. I also have the pistons .

[johnmiller]

Some pics of Clearlake Kids howardhttp://www.***boat.com/image_center/data/524/1373P1000331.JPG

[johnmiller]

http://www.***boat.com/image_center/data/524/1373P1000332.JPG

[johnmiller]

http://www.***boat.com/image_center/data/524/1373P1000333.JPG

[GofastRacer]

Thanks ................
Check your PM's!..

[Clearlake Kid]

John,
Thanks for posting the pics of my Howard. See you soon........