Wanted Casale Gears

[Squeezing Spectra]

Hi i was just wondering if anyone has any used casale gears please let me know. Thanks B.penny

[GofastRacer]

Give Superdave a holler, he may have what you need!!........

[superdave013]

I might be able to help. Also V-drive Tom @ Menkens is a good place to look.
Need to know a few things. What deg box do you have? What ratio and rotation are you looking for?

[WILDERTHANU54]

I HAVE A BUCH AS WELL, BUT I USE A FEW OF THEM. IF DAVE DOES NOT HAVE WHAT YOU NEED I MAY BE OF SOME HELP TO YOU! !
GEOFF

[126driver]

Break out then! Still looking for 12 and 18 10-degree RH. Looks like I'm going to have to step up to the plate and give Casale a call. $$$

[Morg]

126driver:
Break out then! Still looking for 12 and 18 10-degree RH. Looks like I'm going to have to step up to the plate and give Casale a call. $$$126,
I may have 12's in the box of your old boat. I am thinking I will want 15's. Have you got 15's?
Morg

[schiada96]

Spectra what do you have a split case or c-500 or something else?

[Squeezing Spectra]

Ok i know i need a set of 18`s but i have not split the case yet to see what degree so is there any 18`s out there ? . Thanks Bruce

[Sangster]

What are the #s on the v-drive case.. That would tell the degree of the box/gears....

[126driver]

I have 15's Morg, but I want to hang onto them. I also have 9's, 22's and 25's. I might be willing to let go of the 25's after we test all of our new props, hopefully in 4 to 5 weeks. If you want to sell your 12's, let me know. I'll buy them from you.
Superdave - I need to get my 22's and 25's lightened. Interested? How much?
Scott

[126driver]

Hey Morg, if you want to borrow my 15's to try out before you go looking for some let me know. You're probably a couple weeks out though, right wink

[superdave013]

126driver:
Superdave - I need to get my 22's and 25's lightened. Interested? How much?
ScottI was told that this is done before they are heat treated. From what I understand they are some hard mofo's. I do wanna try it anyway though. Anyone have any bad, damaged or worn out ones that I can chew on??

[WILDERTHANU54]

LOL, THOSE GEARS I THINK ARE LIKE 40-50 ROCKWELL. USE A COATED CARBIDE , TURN IT SLOW, THEY WILL CUT. NASTY JOB ON A MANUAL MACHINE! ! !
GEOFF
[ September 05, 2002, 10:05 AM: Message edited by: WILDERTHANU54 ]

[beaverfab]

Superdave I have lightened several sets they are case hardened. We use ceramic to bust through the crust then use carbide to finish. We run several at a time for 75.00 a set. Just let me know if you have any questions. j.j.
[ September 05, 2002, 07:27 AM: Message edited by: beaverfab ]

[Morg]

126driver:
Hey Morg, if you want to borrow my 15's to try out before you go looking for some let me know. You're probably a couple weeks out though, right wink Scott,
Thanks Buddy. I will probably take you up on that when I get ready. Yeah I am just a couple of weeks away :rolleyes: :rolleyes: :rolleyes: It is starting to feel like a couple of years. I should have the new tank next week, after I build the tank mount, I am going to start taking all the hardware out of the hull. eek! eek!
BTW-Let me know if you want to borrow the 12's I have in the box.
Morg.
[ September 05, 2002, 12:04 PM: Message edited by: Morg ]

[WILDERTHANU54]

beaverfab:
Superdave I have lightened several sets they are case hardened. We use ceramic to bust through the crust then use carbide to finish. We run several at a time for 75.00 a set. Just let me know if you have any questions. j.j.:)

[HAZ-MAT]

Squeezing Spectra:
Ok i know i need a set of 18`s but i have not split the case yet to see what degree so is there any 18`s out there ? . Thanks BruceI think I have a set of 18 somewhere in the garage. I'll look and see what degree they are and double check the #'s and post it back in here for you asap.

[Squeezing Spectra]

Haz-Mat that would be great im still looking Thanks Bruce

[HAZ-MAT]

My 18%'s are 12 deg.

[Squeezing Spectra]

HAZ-MAT whats the deep discount $ LOL or could i interest you or anyone else in a nice set of 22% gears please let me know ASAP. Thank You B.Penny

[HAZ-MAT]

I have no clue on what they sell for and really don't need the 22's.
If someone would give me an idea of a fair price I might part with them...

[superdave013]

Squeezing Spectra:
HAZ-MAT whats the deep discount $ LOL or could i interest you or anyone else in a nice set of 22% gears please let me know ASAP. Thank You B.PennyI'm intrested in those 22's. Did you find out for sure that they are 12deg??