focked up

[slotracer]

pulled the pump out and forget to take out the back bolt and broke off the corner of the back of the pump housing :mad: . can i get it welded up? :cry:

[sdpm]

Happens alot. Not a big deal. Grind a "V" shape on the bottom and top side on both pieces. Clamp both pieces down flat. Weld the top side first with short passes if it is a large break. Let it cool completely and slowly. Flip over and do the same on the other side and then use a surface conditioning disc to knock the weld down. Check with a straight edge. Dose not need to be perfect but real close. Good luck.

[Squirrely]

pulled the pump out and forget to take out the back bolt and broke off the corner of the back of the pump housing :mad: . can i get it welded up? :cry:
Pat
Call me I'll drive my service truck up your way and take a look at the pump.

[slotracer]

ken can you weld aluminum?

[Heatseeker]

I can :rollside: !
I'm on the road by 4:45 am. Call me in the morning on my cell.

[Squirrely]

ken can you weld aluminum?
Yes, I can take it to the shop and weld it for you. :)

[slotracer]

ken already dropped it at johns