My new TPR stealth

[TRG]

Cant wait to start on this thing!
Ahttp://www.***boat.com/image_center/data/520/662IMG_1843.jpghttp://www.***boat.com/image_center/data/520/662IMG_1842.jpg[/IMG]

[Aduner2]

Very nice, like the colors. Throw some more pictures up. What motor are you going to run?

[TRG]

gonna pull the motor/pump out of the Rogers see what it does.
as for the pics,...my wife figured it out but she's passed out and have been informed "Not to bother"!!

[Cs19]

That picture pretty much sucks ass but from what I can see the boat looks SICK. Congrats Todd.

[W.O.T]

sweet boat i bet your excited!

[Moose]

Nice Boat!! come on Todd give up a little info on it. Layup? Weight?
I'm partial to these boats and I'll have to post up some pic's of mine and the new rigging.
Moose

[Psycho Squid]

Sweet.....

[TRG]

Thanks - I am trying to get the rest of the pictures up - this mac sucks my ass!

[TRG]

As for the weight of the boat?...All i told Tommy was that the heavier the boat is, the better it would ride in the rough, this boat will have a back seat, by no means a river racer!
the only way MAMA would let me pull the trigger was to have a few stipulations on the purchase of a new hull, oh! Savanah had a heeeuge to do with the color and design too! and she loves it

[YeLLowBoaT]

Can I ask how much and at what stage ( I assuming its bare - intake??)???

[TRG]

[QUOTE=toddnjuzz]Cant wait to start on this thing!
Ahttp://www.***boat.com/image_center/data/520/662IMG_1843.jpg
"Something rather helarious"... the guy sitting down was singing Elvis tunes the entire time i was there today, i asked him if he liked elvis,...he did not know a lick of english but sang in english without a flaw!
FUKKIN FUNNY!

[TRG]

Can I ask how much and at what stage ( I assuming its bare - intake??)???
Have not recieved the bill yet! but it was with the intake set!

[HBjet]

Nice todd... congrats... Can't wait to see it in person
HBjet

[MudPumper]

Sick Todd, what are you going to do with the Rogers??

[djdtpr]

Da sh^t dope bro.I cant wait to see it in person.

[Bense468]

Nice Toddski. How Much Horsepower Are You Running In That Fan

[MikeF]

Nice Toddski. How Much Horsepower Are You Running In That Fan
Todd was not supposed to post the super secret photos w/ the new powerplant. :crossx:
I'm jealous Todd. I can hear that voice inside that says.....you know you really want one. :boxed: Focus man, focus. :)
Looks Good!

[revndave]

Congrats Todd.Nice boat

[olbiezer]

very nice todd....finally a tunnel boat with some color to it.......i dig the colors too....... :) :rollside:

[Nucking futs]

Looks good Todd. I can't wait to see it all together and on the water. Should make a rad family boat !! Will look cool with a back seat in it.
http://www.hi-techperformance.com/images/DCP_0812cr.jpg

[BIGAMIST]

Lookin good Todd,dig the colors :cool:

[Hustler]

Very nice Todd congrates. I know youve been waiting to pull the trigger on this deal for awhile now.

[dmontzsta]

Congrats Todd, I have always liked those hulls.

[flat broke]

Congrats Todd! From the pictures it looks like you kinda did a classic/old School gel scheme which I totally dig. Kinda reminds me of the old Eliminator multi color schemes with red oranges and yellow.
Are you going to hold onto the Rogers?
Chris

[screamdreambrad]

very nice todd....finally a tunnel boat with some color to it.......i dig the colors too....... :) :rollside:
with some color to it???? you must have never seen mine or jasons!

[TRG]

Thanks guys, i guess you could say im keepin up with the jones', but have also always liked the stealth, cant wait to cap it!
The rogers is either going to a budy Ramon, or ultimately go up for sale withe pump but no motor!

[screamdreambrad]

todd that thing looks great! i knew you would have a bitchin scheme to it! verrrrry nice!

[Bense468]

BALLER
on a budget

[Johnwithjm]

Todd the boat looks great.

[moneysucker]

Thanks a lot FOCKER, now I have to get one. Looks great Todd, How are my PM answers coming?

[roostwear]

Beautiful boat! Now you're gonna forget the little guys.......

[Outlaw]

Nice... I'm talking to Tom about building me a 21'
How is the quality of work?

[victorfb]

Beautiful looking hull Todd. congrats. like allready mentioned, i too love the old school style of graphics and scheme. awsome choice Savana.

[blue wonder]

hey todd, way bitchin..im glad you got one, your going to love it!!!!!!!

[Bense468]

http://www.tompappracing.com/

[Dogballs]

Todd,
Sweet boat, you are going to have a bad ass ride there! I love the capped look and it will set yours apart.
Scott

[djdtpr]

Todd,
Sweet boat, you are going to have a bad ass ride there! I love the capped look and it will set yours apart.
Scott
It will look sick right up till it cracks around the cap then it will lokk like poo.Untill you fix it that is.

[TRG]

It will look sick right up till it cracks around the cap then it will lokk like poo.Untill you fix it that is.
You are that arsewhole that tells his buddy right before he gets on his KX250 to go break a clavicle huh? i dont care,...Your boat will always be TittyPink! lol

[TRG]

BALLER
on a budget
Pabst blue ribbon and saltine budget that is!
As Darrin Petrovich put it,..."Ive gotta go on a diet!"...and with a diet like this, im gonna be pretty quick! LOL
...and FU#K the baller status, im goin GANGSTA NINJA!

[TRG]

Beautiful boat! Now you're gonna forget the little guys.......
Last i remember roost, you towered above me by about 2/3'!
I never forget my NINJAS!

[TRG]

Nice... I'm talking to Tom about building me a 21'
How is the quality of work?
Outlaw, ive been a PEST over at the glass shop (at least i think so!) snapping pics, and i have to tell you that those guys are a great bunch of guys, alex and the crew @ aftershock ( They lay up all of tommy's boats as well as cp and others...)really take pride in what they build, truly a top notch company,...and they also can take your rendering of what you want the gel to look like and really do a nice job with it! I am very extatic with the way my boat is comming along!
Todd

[TRG]

Does TPR have a web site? Beutiful boat. What kind of motor and power are you putting in it?
I am pulling the power out of my rogers as well as the pump and its going in the new.
BBC 700HP
American turbine "A" SS
Hope it is as quick as my rogers is!

[djdtpr]

You are that arsewhole that tells his buddy right before he gets on his KX250 to go break a clavicle huh? i dont care,...Your boat will always be TittyPink! lol
Ya but was i lieing to ya?Hell no i was speekin the truth my ninja.Its all good you like doing glass repair anyways.
P.S. its almost gettin to be time to get the bikes out so start workin out a little bit so you can atleast hold on to that bad boy.

[bordsmnj]

Nice Todd! i look forward to watching this thing as it progresses. whatcha gonna do with the rogers hull?

[TRG]

Ya but was i lieing to ya?Hell no i was speekin the truth my ninja.Its all good you like doing glass repair anyways.
P.S. its almost gettin to be time to get the bikes out so start workin out a little bit so you can atleast hold on to that bad boy.
Bike is as good as gone! i think im gonna get a jet pilot! lol....Pinkie!

[Outlaw]

Sounds Great Toddnjuzz,
After laborday weekend mine is sold.
I'm going for the TPR.. Maybe I can get you to take some pics of mine in the glass shop.

[TRG]

All you will have to do is, when you start your build, grab a throw away camers and Alex (Glass shop) will take photos of the build oy your TPR Stealth for you!
P.S. you might want to P/U a good quality "Flash" camera!
Todd

[bluethunder]

Todd
Frank said real nice boat. Is it pleasure or for racing?

[TRG]

Let Frank know i said hello to him as well as the Mrs.!
The boat will be only for pleasure, was thinking about going to the track,...but that is not my concern right now, i am going to have the back seat (Very little one)in the boat for the kid! should still be a fun river boat!
I figure that now that i will be it a "training wheeled" boat it will be a perfect opertunity to re-install the oxide on the motor,....the rogers is just too gnarley to use that shit!
Todd

[Bottle Fed]

nice boat todd. i tell ya if i was ever to have another hotrod type of boat it without a doubt would be a TPR. After looking at the pics from the last river weekend I'm falling if love with them. looking forward to seeing yours on the water.

[FryJet]

Sweet boat Todd. Did I hear you are comming back down our way for Labor day? If so i'm going to be down from Thurday night to Monday morning. Let me know because I have some business to throw your way and you can give him a est. on sight.................after some beers of coarse....lol. It's my buddy Wes that had the PlaceCraft on PT2................he has a Biesmeyer cruiser and its gonna need some love in the color depatment here pretty quick. PM me and i'll give you my #. Thanks.
F.J.

[bigriverdog]

Todd,
You sold out. And here I thought you were all about the classics.
Well at least your going big. Nice piece.

[Not Twice]

Todd,
Congratulation on the new boat, it looks great. It’s going to hurt to see that Rogers towed away.

[TRG]

Just finished the cap job today and will try to get some pics up in thee next day or two.
Todd

[sleekcrafter]

A very sharp boat

[TRG]

Well i have some pics in the image center but am still having problems posting on this mac, can i get a hand?
Thanks
Todd

[Nucking futs]

http://www.***boat.com/image_center/data/520/662IMG_2000.jpg
http://www.***boat.com/image_center/data/520/662IMG_2004.jpg
http://www.***boat.com/image_center/data/520/662IMG_2005.jpg

[Nucking futs]

Looks good! should go quick now.

[BGMAN203]

Looking nice Grizniggs!!

[MikeF]

REALLY looking forward to the finished product! :D
Makes me more jealous.:mix:

[TRG]

Thanks! have a few boogers that i need to touch up, but never the less, im already having fun with the boat!
Thanks for putting the pics up!

[FOURQ]

Well i have some pics in the image center but am still having problems posting on this mac, can i get a hand?
Thanks
Todd
Cmon Todd Macs way are easyer than a PC.. lol .....looking good

[sanger mike]

todd thats bad to the :crossx: :crossx: :crossx: bone.

[TRG]

http://www.***boat.com/image_center/data/520/662IMG_2012.jpg http://www.***boat.com/image_center/data/520/662IMG_2010.jpg
That's all folks!

[cyclone]

you need to update your signature there senor griggs. boat looks amazing. as always, nice work.

[TRG]

Just for you finne'!

[cyclone]

lol. fishbait. that what you callin it now?

[TRG]

Actually,...i just recieved a shipment of those lil' drink umbrellas too, im going to have a fire sale out @ the pomona swapmeet this sunday, not to mention the unlimited supply of AA beer coozies!
Come one come all, they're goin' cheep cheep!

[FASTJTBT]

Todd nice boat Tom really does a great job

[MACHINEHEAD]

Sup Grizzle. Seriously. way too nice of a boat....for you. Im almost done with the custom thru hull trolling motor mount. did you want a 72watt or the 80watt motor? Btw your bait arrived half dead but still usable, it rocks!

[TRG]

Right on there so. Austin!
...and the comment about the world class bait im slangin'...the carp down there wont mind, hell i think you will have to worry about the bugs snatching it up in mid cast!
Oh..and BTW, the larger troller of the two, and can you rattle can it up grey. i kinda want it to blend with the boat, so it's,...you know, not so obvious!
Thanks!
Todd

[Bense468]

Nice boat a$$hole

[dmontzsta]

Bitchen boat Todd.

[DILLIGAF]

I was down at TP today and I was checking it out. Very nice looking hull and the colors look nice.

[77charger]

Nice todd when will it be ready?
That 22 daytona next to it is my brothers his should be ready in a couple weeks and it is going to be a fast one :crossx: :)

[TRG]

Nice todd when will it be ready?
That 22 daytona next to it is my brothers his should be ready in a couple weeks and it is going to be a fast one :crossx: :)
I will not be done with the boat for a while, not really in a huge hurry, my buddy B'ry is helping me with the instalation, i figure sometime in 07' pre summer, i hope! lol
I was talking with Rick about the blue 22', he wants to lake test this friday, he was re-wiring the boat when i was ther saturday!
It should be a nice boat!
Todd

[cyclone]

I will not be done with the boat for a while, not really in a huge hurry, my buddy B'ry is helping me with the instalation, i figure sometime in 07' pre summer, i hope! lol
I was talking with Rick about the blue 22', he wants to lake test this friday, he was re-wiring the boat when i was ther saturday!
It should be a nice boat!
Todd
saw it today. gauges look sweet and the cap job is beautiful.
she's a beaut, clark, a beaut!

[TRG]

Thanks bro!
I meant to call you back today, but i was at the swapmeet, and had a hand full of @*%?

[Cs19]

i was at the swapmeet, and had a hand full of @*%?
lemme guess... a beer, a carnitas taco and some socks.

[TRG]

a beer, a smoke, dynaMat (2rolls) two F'in sweatshirts,cuz it was like 20deg. this mornin' when i left, and a tri-tip sandwich!
Oh and a veeery happy belly! :)

[cyclone]

midkiffs new boat looks real nice too.

[TRG]

Oh! you mean "Cum Stain"? :crossx:

[cyclone]

lol. i wasn't gonna say it but yeah.
premature ejaculation?

[TRG]

i think he should start a thread about naming his new boat!...on 2nd thought, that one might get right outta hand!
He ran a couple by me the other day....
1) "Blown Load"
2) "Cum Stain"
3) "Got Milk"
4) "Great White Hope"
my personal favorite!

[TRG]

Juzzy just came up with a good one!...lol
"Papa's (grandpa) got a brand new bag"

[cyclone]

Juzzy just came up with a good one!...lol
"Papa's (grandpa) got a brand new bag"
got milk is a good one.
how about:
great white hype.

[Bense468]

when you were down there did you see my "used to be brand new" motor stand all focked up...Cum stain better get a new one quick. I got a motor to pull out of a 71 Detomaso Pantera.

[garret]

when you were down there did you see my "used to be brand new" motor stand all focked up...Cum stain better get a new one quick. I got a motor to pull out of a 71 Detomaso Pantera.
Bense I have your motor stand just havent really been home before nine and I am in Indio working will run it by Friday

[Bense468]

I was just giving you a hard time Garrett

[TRG]

Finally got the boat home with a heater, blanket and a pillow, just so she dont get too chilly! Now the only problem is,...i dont get much done on the "Hunny dooooo's" tip, thats ok, she'll just have to pick up the "Slack" a bit!

[77charger]

Finally got the boat home with a heater, blanket and a pillow, just so she dont get too chilly! Now the only problem is,...i dont get much done on the "Hunny dooooo's" tip, thats ok, she'll just have to pick up the "Slack" a bit!
Hurry up and get that transom on that 22 daytona done too :shift:

[edog_103]

Finally got the boat home with a heater, blanket and a pillow, just so she dont get too chilly! Now the only problem is,...i dont get much done on the "Hunny dooooo's" tip, thats ok, she'll just have to pick up the "Slack" a bit!
Are you sure it's not "hunny dont's"? Or is that only when you are talking about putting it on the sauce?:mix:

[TRG]

Hurry up and get that transom on that 22 daytona done too :shift:
The work is being completed here real quick,...you gotta remember that there are more than just a fiberglass guy puttin' time in your boat, so there is a sort of peckin' order (Rick) as to what work can be done at a certain time.
I appreciate your patience though!
Todd

[IMPATIENT 1]

when you were down there did you see my "used to be brand new" motor stand all focked up...Cum stain better get a new one quick. I got a motor to pull out of a 71 Detomaso Pantera.
my boss is trying to sell his pantera, know of anyone lookin?if so,pm me for his number.

[77charger]

The work is being completed here real quick,...you gotta remember that there are more than just a fiberglass guy puttin' time in your boat, so there is a sort of peckin' order (Rick) as to what work can be done at a certain time.
I appreciate your patience though!
Todd
You know i am just messin with you todd!!:D My brother is glad it is being worked on vs just sittin.Progress is going pretty good from what i have heard.

[TRG]

You know i am just messin with you todd!!:D My brother is glad it is being worked on vs just sittin.Progress is going pretty good from what i have heard.
Im catchin' whatcha puttin down!
I guess (After re-reading what i posted), that mighta been a little stiff!:D , he said stiff! lol

[MACHINEHEAD]

A whole page and no pix. Re-name this my TPR yap-a-thon. Sorry Todd, No Soup For You

[EAZYKILLER2006]

i think he should start a thread about naming his new boat!...on 2nd thought, that one might get right outta hand!
He ran a couple by me the other day....
1) "Blown Load"
2) "Cum Stain"
3) "Got Milk"
4) "Great White Hope"
my personal favorite!
how about L(.)(.)K~N~4 SUM:jawdrop:

[TRG]

I guess i shoulda mention'd that the hull is all white!

[mirrorimage]

hey tood are you still makig scoops ???:confused:

[mouzer]

uuhhmmmmm:eek: nice!

[edog_103]

http://www.***boat.com/image_center/data/500/IMG_2088.JPG
http://www.***boat.com/image_center/data/500/IMG_2087.JPG
http://www.***boat.com/image_center/data/500/IMG_2086.JPG
http://www.***boat.com/image_center/data/500/IMG_2085.JPG

[TRG]

Smart-ass

[mirrorimage]

damm todd its coming along real nice ... sweet!!!!:D

[TRG]

....and slow! But thanks, i've had alotta help from my neighbor John @ Concept Marine, and he's not the reason why its such a slow process, im just the most indecisive fool on god's green earth! lol Trying for fourth,...ehhh who knows at this point, the shop has picked up and am going to be busy for a minuit!

[Nucking futs]

Looking good !! Not much has been done from when I saw it last. :D :D
John does nice work.

[MudPumper]

....and slow! But thanks, i've had alotta help from my neighbor John @ Concept Marine, and he's not the reason why its such a slow process, im just the most indecisive fool on god's green earth! lol Trying for fourth,...ehhh who knows at this point, the shop has picked up and am going to be busy for a minuit!
Get a move on Tizzle. Summer will be over before you know it.:D

[HBjet]

....and slow!
I love it... that would be the best name for that boat on several levels... :D
Looks good Todd... I saw that thing up close when we worked on Cyclones boat... real nice. Just at the rate your going I think you already know what the outcome to our race is going to be... haha, just messing with ya. I know your busy taking care of biz...
It will be cool to see that thing on the water when you have it complete.
HBjet

[2dasand]

Rumor has it that your boat got some wiring in it, after you left today. Just another step closer.......
Looking good, but would you hurry up, slow poke?

[LuckyDaze]

Hey Todd, that stringer you took care of looks bitchen. Thanks so much. If theres any help I can be with your boat give me a hollar. Even if its to bring some beer by. I gotta see that thing go, its gonna be one heck of an e-ticket ride!
~Brian

[Mrs.Moose on the loose]

http://www.***boat.com/image_center/data/500/IMG_2088.JPG
http://www.***boat.com/image_center/data/500/IMG_2087.JPG
http://www.***boat.com/image_center/data/500/IMG_2086.JPG
http://www.***boat.com/image_center/data/500/IMG_2085.JPG
Beautiful boat, love the color scheme. I love how our boat rides, it is so different then any other boat I have rode in. (Although I would love to know how a Pro Mod Hydro felt like);) Enjoy it and have fun, please give us the finished pics also.:smile:

[dmontzsta]

....and slow! But thanks, i've had alotta help from my neighbor John @ Concept Marine, and he's not the reason why its such a slow process, im just the most indecisive fool on god's green earth! lol Trying for fourth,...ehhh who knows at this point, the shop has picked up and am going to be busy for a minuit!
Little more time, little more money, then more time thinking about it and changing stuff, then more money, then more time. :D :)

[Schiada Time]

Lookin' Good Todd. You are extrememly anal so I don't doubt the boat will be perfect. Stabbing the motor out of the Rogers in there?
Trav

[Taylorman]

Who laid up this boat?

[tamalewagon]

Sick Todd, what are you going to do with the Rogers??
Make it a bowrider? :D :D :D
Nice boat Todd!

[gots beer wages]

hey todd looks great,

[Hustler]

Boat looks great Todd. If you would stop taking 2 hour lunches at the local watering hole the damn thing might be done:D

[TRG]

I see im surrounded by quite a few "Smart-asses" J/K
Thanks for the compliments guys! I have completely lost it!....day dreaming about its maiden voyage and the look on "Boogers" lil face when she gets her first ride!...Oh yeah, Juzzy should be there too! lol
J/K hunny!
BTW the Rogers is GONE!...i hear through the rumor mill the guy who bought it is now residing in Lake Havasu, so i think there is a great chance i will see it again!
Hope so! might have to break him off some! lol J/k
Thanks again!
more pics to follow!

[djdtpr]

Grasshopa i only hope it runs as good as you are dreaming about. At 6.5-1 you might want to get a little blue bottle so maybe you can take the wacker!:jawdrop:

[disco_charger]

Quit f'ing around with your R/C car and get to it! I've seen it up close, and it's damned nice.

[TRG]

@ 6.5-1 it'll make a wonderful family cruiser, just what i wanted!:D
RC cars is the only thing i can do to get away from all of the other B.S.!:D

[Mike D..]

Todd looking good, Where did you get that tack, I orderd the same one from summit and they told me it was a special order with the recal and it had to be made?

[TRG]

Mike, i purchased it from Hotrods in Corona, im sure Shoe can get you one from there, it took me 2-3 days to get it to Tommy's,...you know who else had them in stock (i just remembered!) CAE in Pomona has them in stock as well, # 909-596-9146 the guys name is Paul.
Todd

[blue wonder]

summit or jegs has them too...244.99

[blue wonder]

hey todd...quit typin and get that damn boat done!!!!!!

[TRG]

If i was independantly wealthy like you i would have all my bills paid and a boat on the water! so until then i will keep on keepin' on!

[Mike D..]

Mike, i purchased it from Hotrods in Corona, im sure Shoe can get you one from there, it took me 2-3 days to get it to Tommy's,...you know who else had them in stock (i just remembered!) CAE in Pomona has them in stock as well, # 909-596-9146 the guys name is Paul.
Todd
Thanks

[blue wonder]

If i was independantly wealthy like you i would have all my bills paid and a boat on the water! so until then i will keep on keepin' on!
lol...i dont know who lied to you!!!!...im a broke dick these days....bad enough time just puttin fuel in the boat to make it down the track!!!

[Saab]

Hey todd, just wondering what the second pedal is for? I'm new to jet boats, seen two pedals on a v-drive before.

[RUSSO]

Hey todd, just wondering what the second pedal is for? I'm new to jet boats, seen two pedals on a v-drive before.
WANNABE!!All the jet guys are doing it!!!!

[TRG]

The left pedal in fwd/rev i was going to try and figure out how to use it for diverter, but i figured it would be a waste of time considering it would be hard to hold it in a set position on a pass with rough water and all. i guess i will see how it works, seems to be pretty nice on the trailer, we'll have to see how easy it gets off the trailer, might have to go with a lighter spring, but as for not its a lil effort to compress it.
i think effortless would not be safe anyhow!
Marty,... what can i say other than,..."im not gonna have the flashiest seat covers on the colorado"!
did you get everything squared away with your lil' mishap over the holiday?
sorry to hear about that!
everything should be back from polish on mon. and i will have it in the boat by wed. or thurs.
i'l get some pics up!
Todd

[edog_103]

The left pedal in fwd/rev i was going to try and figure out how to use it for diverter, but i figured it would be a waste of time considering it would be hard to hold it in a set position on a pass with rough water and all. i guess i will see how it works, seems to be pretty nice on the trailer, we'll have to see how easy it gets off the trailer, might have to go with a lighter spring, but as for not its a lil effort to compress it.
i think effortless would not be safe anyhow!
Marty,... what can i say other than,..."im not gonna have the flashiest seat covers on the colorado"!
did you get everything squared away with your lil' mishap over the holiday?
sorry to hear about that!
everything should be back from polish on mon. and i will have it in the boat by wed. or thurs.
i'l get some pics up!
Todd
Your parts are being cut as we speak. they should be ready mondya morning.

[TRG]

Nice!
i might be driving out to Vegas mon. afternoon or tues. morning, i'll work something out!:D

[edog_103]

Hey guess what. Your parts never got cut because the lazer guy is a flake, but I did find these.
http://www.***boat.com/image_center/data/500/IMG_2133.jpg
http://www.***boat.com/image_center/data/500/IMG_2132.jpg
http://www.***boat.com/image_center/data/500/IMG_2130.jpg
http://www.***boat.com/image_center/data/500/IMG_2129.jpg

[TRG]

I still cannot figure out how to post pics with my mac!
Thanks anyways edog!

[Mike D..]

I still cannot figure out how to post pics with my mac!
Thanks anyways edog!
Very very nice, now hurry and get her out for the 4th

[sofa king smooth]

Caught someone trying to learn black magic yesterday.:idea: Hope you get everything worked out Mike.

[Danhercules]

I still cannot figure out how to post pics with my mac!
Thanks anyways edog!
I can help you with that. Its easy.

[Mike D..]

Caught someone trying to learn black magic yesterday.:idea: Hope you get everything worked out Mike.
Trying to steal some of the red cup secrets, Tried to bribe Jack to leave team, You guys cheat that guy is way to smart, He is the back bone of rcr.
On a serious note what a cool system (data aquis ) , well worth every penny. Thanx Jack
Funny thing is a turned around for one minute and when I turn back there was 2 feet hanging out the back of my boat;)

[RUSSO]

The gold leaf looks TITS!!!

[Blown Income]

If i was independantly wealthy like you i would have all my bills paid and a boat on the water! so until then i will keep on keepin' on! He's not independantly wealthy he's just wants you to think that.:sqeyes:

[blue wonder]

He's not independantly wealthy he's just wants you to think that.:sqeyes:
well i make enough to do what i want to do though:D

[LuckyDaze]

Who did your gold leaf Tod? When I had the mural painted on the back of my boat I wanted to do silver leaf....
~Brian

[TRG]

Bob Thompson, i will put up his # later on when i have my phone!
The fourth will most definitly not happen, waaay too many irons in the fire at this point, but im sure it will be sooner rather than later!

[revndave]

Boats looking good Todd.:D

[Danhercules]

Bob Thompson, i will put up his # later on when i have my phone!
Team Thompson.
909-987-4424
He did my Southwind and will be doing the TPR soon.

[TRG]

Just Picked up the Crower stack injection from the "GURU" yesterday and i gotta tell you, I am so excited to get on the water, everyday it gets closer!
should have more pics in the next couple of days
http://img124.imageshack.us/img124/5743/img2150wy7.jpg

[TRG]

also,...a misterious sticker has appeared, can you see and identify???

[blue wonder]

also,...a misterious sticker has appeared, can you see and identify???
i gotta get me one of those!!!!!

[djdtpr]

also,...a misterious sticker has appeared, can you see and identify???
WTF are you talking about? Dude get off the weed before we have an intervention!

[TRG]

Now you know we cannot have this intervention you talk of!...your wife said i am a bad influence on you, and that we cannot play after the street lights come on!

[djdtpr]

Whats the mysterious sticker or where is it at? My wife said we cant play together unless there are parets around.

[TRG]

My wife could give a shit, just as long as im not "Hip thrusting" in her direction!
Game on!

[TRG]

Going to bed,:D its baby making season!...and NO you cannot help out Dirty D!:devil:

[blue wonder]

Going to bed,:D its baby making season!...and NO you cannot help out Dirty D!:devil:
put me in coach:D

[Bense468]

Hey is it allowed to talk about JUNK BOX and Wifes all in the same sentence???

[MAXIMUS]

That boat looks outstanding! I really like the color scheme... With the crowers it will be very unique! Way to go & please keep posting pics!:)

[djdtpr]

Hey is it allowed to talk about JUNK BOX and Wifes all in the same sentence???
It is if its my tool being used on both of them!:D

[Bense468]

It is if its my tool being used on both of them!:D
OH you mean the SNAP ON nut driver

[Oldsquirt]

Just Picked up the Crower stack injection from the "GURU" yesterday and i gotta tell you, I am so excited to get on the water, everyday it gets closer!
should have more pics in the next couple of days
Todd, who set up the Crower's for you? What size/compression motor are you putting them on?

[Nucking futs]

OH you mean the SNAP ON nut driver
Would that be the popular 5/16" one? :D

[TRG]

Todd, who set up the Crower's for you? What size/compression motor are you putting them on?
Rick King restored the injection, as for the motor, its gonna stay the same,8.5/1 540ci chevrolet. worked in the Rogers, should work in the Stealth!

[ZTFab]

Looking good Todd.
Get me that tank so I can modify it for the injection.
- Paul

[TRG]

I'll get it over to you today Paul!
BTW you still sellin your 18' Bahner?...hope not!