View Full Version : Schiada 21 w/TPI600efi
For Summer of 2006 I installed a motor/drive package on this nice 21 Schiada. Since I am always talking about Howards, I figured I would show some pics of this cool boat. This is one of the funnest boats I have ever been in. It will run in the upper 80's pretty easily. The customer brought me the boat less motor and wanted a motor/drive package along with new engine compartment rigging and a dash upgrade. Here are a few pics for your entertainment:
http://www.***boat.com/image_center/data/520/383TPI0406_001m.jpg
http://www.***boat.com/image_center/data/520/383miledi09_003m.jpg
http://www.***boat.com/image_center/data/520/383miledi0622_011m.jpg
Upgraded to full hydraulic steering, autometer gauges, GT Billet/wireless helm, etc,,,,,,,,,,,,,,,,,,,,,,,,,,,,
http://www.***boat.com/image_center/data/520/383miledi098_001m.jpg
mbrown2
08-28-2006, 07:47 AM
Dam....work Firewalls are blocking the pics.... :argue: ...sounds like a nice combo...
mondorally
08-28-2006, 08:13 AM
For Summer of 2006 I installed a motor/drive package on this nice 21 Schiada. Since I am always talking about Howards, I figured I would show some pics of this cool boat. This is one of the funnest boats I have ever been in. It will run in the upper 80's pretty easily. The customer brought me the boat less motor and wanted a motor/drive package along with new engine compartment rigging and a dash upgrade. Here are a few pics for your entertainment:
Upgraded to full hydraulic steering, autometer gauges, GT Billet/wireless helm, etc,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Nice to see the boat in good hands (I'm the son of the previous owner). And yes, that boat is an absolute blast. Tell Charlie it looks good. He should have many trouble free years with the new setup.
-Justin
What a nice boat. I was hoping the previous owners would be on the boards. Thanks for the compliments.
spectras only
08-28-2006, 10:08 AM
I love Schiadas [ a friend owned a 22 back in the early 70's] ,and would love to have a 27 [ like Mondorally's ] with big power . What is the deadrise on the 27 ? My 24 Spectra had only 16* and handled big water pretty good.
mondorally
08-28-2006, 10:26 AM
I love Schiadas [ a friend owned a 22 back in the early 70's] ,and would love to have a 27 [ like Mondorally's ] with big power . What is the deadrise on the 27 ? My 24 Spectra had only 16* and handled big water pretty good.
Hmmnn. I have no idea, but now you've got me curious..... I'll see what I can do to figure it out.
-Justin
spectras only
08-28-2006, 10:53 AM
Mondo, my friend had a prego passenger riding in this video , and she never complained . I thought she might give birth prematurely , but I know the boat is like a brick and had it in much worse conditions while I had it .
http://media.putfile.com/24-Spectra-in-English-Bay-2006-July-22
mbrown2
08-28-2006, 11:33 AM
Nice rigging job.....looks great Gary...nice combo....TPI/Schiada...:)
Kilrtoy
08-28-2006, 12:54 PM
Incredible... that is exactly how it looks
Here are a few more pics. I really liked working on this boat.
http://www.***boat.com/image_center/data/520/383miledi0622_012m.jpg
Tight spacing,,,,,,,,,,,,,,,but it worked out nice.
http://www.***boat.com/image_center/data/520/383miledi09_001m.jpg
blackcloud75
08-28-2006, 02:04 PM
Nice work!!!!!!!!!!!!!
djunkie
08-28-2006, 02:08 PM
Here are a few more pics. I really liked working on this boat.
http://www.***boat.com/image_center/data/520/383miledi0622_012m.jpg
Tight spacing,,,,,,,,,,,,,,,but it worked out nice.
http://www.***boat.com/image_center/data/520/383miledi09_001m.jpg
I wonder what this motor would do in my boat? :idea: :idea: :D
These 600's seem to work well in just about anything. They are pretty fun.
djunkie
08-28-2006, 02:42 PM
These 600's seem to work well in just about anything. They are pretty fun.
Thats definately a nice looking setup.
http://www.***boat.com/image_center/data/520/383miledi0622_004m.jpg
SBullet
08-28-2006, 04:21 PM
These 600's seem to work well in just about anything. They are pretty fun.
GT,
What's the cost on the Motor/Drive package?
The drop in motor only with all of the accessories is $26949.00. With the drive and gimbal choices available, the complete package price varies. When comparing costs to a merc 525, I don't even try to compete. Mercury's prices(especially dealer prices) are very good. But for the guy that wants something custom made for him, this is definately a great choice.
http://www.***boat.com/image_center/data/520/383miledi063_001m.jpg
rodnjen
08-28-2006, 06:47 PM
Beautiful boat, always been one of my favorites.
SBullet
08-28-2006, 07:00 PM
The drop in motor only with all of the accessories is $26949.00. With the drive and gimbal choices available, the complete package price varies. When comparing costs to a merc 525, I don't even try to compete. Mercury's prices(especially dealer prices) are very good. But for the guy that wants something custom made for him, this is definately a great choice.
http://www.***boat.com/image_center/data/520/383miledi063_001m.jpg
GT,
Thank for the info!! That is a very sweet package
dicudmore
08-28-2006, 07:16 PM
looks great Gary :cool:
21' Schiada with one of Gary's motors eh :idea: Is that Brown's boat?? :)
mbrown2
08-28-2006, 07:27 PM
Is that Brown's boat?? :)
Nope...not mine, but someone is getting lucky! :)
The boat belongs to a couple from Pasadena. They like taking it to the river. Super cool people. Here is a pic from Elsinore before the hatch was done.
http://www.***boat.com/image_center/data/520/383miledi099_013m.jpg
Cole Trickle
08-29-2006, 08:01 AM
Gorgeous boat with a stunning motor!!!:D :p
Nice work :)
Cole, I just responded to your vette thread? You might find it interesting? Also, thanks for the compliments on the motors,,,,,,,,,,,,,,,,,,,,,
Cole, I just responded to your vette thread? You might find it interesting? Also, thanks for the compliments on the motors,,,,,,,,,,,,,,,,,,,,,
spectras only
08-29-2006, 08:52 AM
TPI , that hole package is gorgeous . It should have a see through hatch .
We have a see through tempered glass on this engine box >
http://www3.telus.net/spectrasonly/572%20sliding%20glass%20top
http://www3.telus.net/spectrasonly/572%20engine%20box
http://www3.telus.net/spectrasonly/ZZ%20572%20engine%20box
Wow! That looks like a bunch of work!
spectras only
08-29-2006, 09:04 AM
The woodwork was done in ca 6 months .The rest of the project was built on a budget and took around 3 years.My friend is amazing with woodwork and worked on superyacht interiors .
Holland
08-29-2006, 10:49 AM
Gary...
As usual, your stuff looks killer... And I am sure it will run for hundreds of trouble free hours also.
I STILL need to get in there with you about the 525 upgrade stuff...
Gotta get$$$$ first...
See ya soon... This winter????
Gary...
As usual, your stuff looks killer... And I am sure it will run for hundreds of trouble free hours also.
I STILL need to get in there with you about the 525 upgrade stuff...
Gotta get$$$$ first...
See ya soon... This winter????
That sounds good. Make sure you give me a few months notice. This new 848 thing is taking off and I already have my hands tied. Remember, two motor orders and I am swamped! :rollside: Seriously, Just let me know and I will get your 525 taken care of. Thanks Gary
More Schiada Pics,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
http://www.***boat.com/image_center/data/520/383miledi098_006m.jpg
http://www.***boat.com/image_center/data/520/383miledi09806_012mm.jpg
http://www.***boat.com/image_center/data/520/383miledi0622_010m.jpg
djunkie
08-30-2006, 12:29 PM
Hey Gary, what speeds did that Schiada see with this motor? And thats the 21 tunnel isn't it?
It is a 21 RT. I did not push this boat very hard. I drove it in the mid to upper 80's pretty easily. I am sure it will run over 90 mph without too much effort. I am generally pretty gentle with my customer's boat's, especially with a brand new motor. I would like to get a couple hours and an oil change on board before I lay down the top speed #, and that is always at the request of the customer. Generally, these motor's make a customers boat run faster than they were expecting, or faster than they are ready to go, so I just make sure everything exceeds their expectations before I deliver the boat.
djunkie
08-30-2006, 04:07 PM
It is a 21 RT. I did not push this boat very hard. I drove it in the mid to upper 80's pretty easily. I am sure it will run over 90 mph without too much effort. I am generally pretty gentle with my customer's boat's, especially with a brand new motor. I would like to get a couple hours and an oil change on board before I lay down the top speed #, and that is always at the request of the customer. Generally, these motor's make a customers boat run faster than they were expecting, or faster than they are ready to go, so I just make sure everything exceeds their expectations before I deliver the boat.
Thats pretty impressive. And I hear ya on the breakin
I can't believe how many people have checked this out over a week,,,,,,,,,that's cool. I am out of good pics, that's pretty much it.
dr. margarita
08-31-2006, 01:25 PM
As always Gary, your work is stellar!! This pewter 600 is a perfect match to this particular boat color. The owners should be very proud!
Thanks for the positive replies. I am really happy the way it all came together. Gary does super sano work. Even if he is tight fisted with the t-shirts. :rollside:
Here are a couple pics of the "finished" product.
Charlie
http://***boat.net/forums/attachment.php?attachmentid=17203&stc=1
http://***boat.net/forums/attachment.php?attachmentid=17204&stc=1
mondorally
08-31-2006, 02:38 PM
Charlie,
Looks good! What is that on the top/rear of the hatch? Looks like a vent but I can't quite figure it out.
-Justin
LITTLE D
08-31-2006, 02:45 PM
You would think with all the advertising Gary is getting he would send you a t-shirt.
Thanks for the positive replies. I am really happy the way it all came together. Gary does super sano work. Even if he is tight fisted with the t-shirts. :rollside:
Here are a couple pics of the "finished" product.
Charlie
http://***boat.net/forums/attachment.php?attachmentid=17203&stc=1
http://***boat.net/forums/attachment.php?attachmentid=17204&stc=1
Charlie,
I am glad your are enjoying the boat. LOL, The t shirt comment surprises me, :rollside: I seem to recall sending you a tee shirt when you only inquired about one of my motors. Tell Sylvia I have some HOT ladies tanks with both string shoulder straps and regular style tanks. She can have two on the house! Just let me know what size!
Sheeeeesh, it's always the guys that buy the little motor's that whine :cry: :cry: :rollside: :rollside: :rollside:
Thats because we have to compensate for our motor short comings with apparel. And yes, I did get a shirt already. Just trying to guilt you into another one. :p
Mondo: Yeah, it is a "scoop". I wanted to fill in the hole in the hatch flat across. But, Gary builds his motors about an inch too tall. So, this is what I came up with.
http://***boat.net/forums/attachment.php?attachmentid=17206&stc=1
That 1" too tall engine= more power and fun for you and Sylvia. You don't have to guilt me into a shirt, just ask. It's ok. You are a paying customer. Here: gary@tpboats.com or (805)480-2693 I need Sylvia's size and I have a XXS for you. :crossx:
LOL...xxs. That is some funny shiat. All kidding aside, Gary does awesome work. We couldnt be more pleased. We get tons of compliments and I would recommend his work to anyone. Plus his motor hauls ass.
Charlie
Thanks,
Now you get two shirts too. :crossx:
mondorally
08-31-2006, 05:29 PM
Thats because we have to compensate for our motor short comings with apparel. And yes, I did get a shirt already. Just trying to guilt you into another one. :p
Mondo: Yeah, it is a "scoop". I wanted to fill in the hole in the hatch flat across. But, Gary builds his motors about an inch too tall. So, this is what I came up with.
http://***boat.net/forums/attachment.php?attachmentid=17206&stc=1
Actually I was referring to the exhaust manifolds (now that I can see them). From the other direction I wasn't sure what I was looking at. And with the "scoop" it'll be that much easier to whipple it down the line!
-Justin
Isnt it cool how the exhaust sticks out like that(that was Charlie's idea :rolleyes: ) I wonder if the whole hatch was built 1" higher if it all would have cleared that motor that is too high? :boxed: I like the Whipple idea, I have a polished 200ax ready for you Charlie, just let me know. We can butter Silvia up with some shirts before you break the news. :cool: :crossx:
I was really limited with what I could do with the hatch. Its pretty tight clearances in there. Maybe in the off season I can figure something out. Or, better yet have a proffe$$ional look at it. Anything completely covered would be a lot of work. At least the CMI's dont get very hot.
Hmmm, Whipple? I think you would need to send quite a few of those shirts to my insurance guy first. :cry:
I can hear it now,,,,,,,,,,,,,,,,,,,Hey insurance guy, I have a 21 river tunnel with an 800+HP supercharged engine in it. What is my annual payment? If they said yes, I am guessing $7000+ for a real policy.
dr. margarita
09-01-2006, 09:21 AM
Smokin Schiada!!! Best one I've seen. The cut outs for the headers look fine. It would be cool if the exposed black hose could be something a bit more durable resisting the sun cracking the rubber.
The boat is a real kick to drive. It feels like you are going even faster than you truely are............. :crossx: :crossx:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.