Intake Loaders with Blocker

[HBjet]

I have 2 intake loaders that I'm not using and they are just collecting dust. Both are custom built and have V blocker. I want to sell them.
First One
http://www.***boat.com/image_center/data/520/20Loader_1_C.jpg
http://www.***boat.com/image_center/data/520/20Loader_1_B.jpg
http://www.***boat.com/image_center/data/520/20Loader_1_A.jpg
Second One
http://www.***boat.com/image_center/data/520/20Loader_2_B.jpg
http://www.***boat.com/image_center/data/520/20Loader_2_A.jpg
Please PM me if your interested.
Thanks
HBjet

[Havasu Carrera]

Can not remember for how much exactly but nothing as nice as yours and I was suprised at how much I got!? FYI

[UBFJ #454]

Hot rolled or cold rolled steel, Stick, MIG'd or Tig'd and who welded them?

[cyclone]

By the looks of it they were MIG welded.

[beerjet]

What is the purpose of the blocker . Mine doesnt have nearly that much area blocked .
-beerjet-

[Sweet Cruz]

It's to limit the amount of water going into the pump. The more blocker you have the less water. the less blocker the more water.

[beerjet]

So does more blocker mean more RPM .
-beerjet-

[Sweet Cruz]

I didn't notice a difference. I had 8 inchies of blocker and i cut out 1 inch. the motor stayed at 5700 rpm, but the pump is now showing 25 psi of intake pressure.

[FILUCKY]

I was wondering what the differance was, i can see they have the same amount blocked off but one is flush and the other is set about a 1/4" up in the hole. What would be the differance in performace between the two? More lift when the blocker is set lower?