PDA

View Full Version : Weld Racing Mountain Crushers-2500HD


Jordy
10-11-2006, 09:52 AM
OK, so I jumped up a bit in size so I've got my 16" x 10" Mountain Crushers that I don't need anymore. Paid around $350 each when I picked them up. Will take $500 for all 4 with center caps (that hide the lugs) and lug nuts (just factory GM). Fit 8 lug GM hubs. Ran them with 285/75R16 BFG's and they looked good. If anyone still runs 16's anymore. They could use a good polishing, but with no tires on now is the time...
http://www2.***boat.com/forums/attachment.php?attachmentid=18601&stc=1
http://www2.***boat.com/forums/attachment.php?attachmentid=18600&stc=1
Just checked a couple places online and they're still around $300 a wheel average, without the caps.
Jbb
10-11-2006, 09:55 AM
Jordy...It's time for some weed and feed!..... :argue:
phebus
10-11-2006, 11:36 AM
Delivered to Havasu? I'm definately interested
Cole Trickle
10-11-2006, 11:42 AM
Delivered to Havasu? I'm definately interested
You might want to verify but I believe 05 and newer Silverados need 17"+ wheels due to the size of the brakes.
djunkie
10-11-2006, 11:44 AM
You might want to verify but I believe 05 and newer Silverados need 17"+ wheels due to the size of the brakes.
My 05 has 16" wheels.
Cole Trickle
10-11-2006, 11:55 AM
My 05 has 16" wheels.
really?
Is it an 05 or 04.5
Our 05 1500 switched back to Drums in the rear(For better braking) and now has a bigger disk in the front. 16" wheels won't fit.
Do you have disc or drums in the rear?
Jordy
10-11-2006, 12:52 PM
really?
Is it an 05 or 04.5
Our 05 1500 switched back to Drums in the rear(For better braking) and now has a bigger disk in the front. 16" wheels won't fit.
Do you have disc or drums in the rear?
He just said his '05 has 16" wheels. Try and pay attention here dammit!!! :D :D :D
I don't know when I'm going to Havi again, but I'm sure I can find someone to get them out there if nobody jumps on them locally. Just send your check or money order to... :D :D :D
Cole Trickle
10-11-2006, 01:05 PM
He just said his '05 has 16" wheels. Try and pay attention here dammit!!! :D :D :D
I don't know when I'm going to Havi again, but I'm sure I can find someone to get them out there if nobody jumps on them locally. Just send your check or money order to... :D :D :D
Sorry...... I am really bad with numbers!!!:D :p
I was under the impression all 05's changed. I tried to buy some take offs and when we tried to bolt up some wheels off a 04 they were no bueno.(8 lug must be different)
On second thought we are talking about DJunkie!!! :idea: :rollside:
kevnmcd
10-11-2006, 01:15 PM
My '06 has 16's but just for today...tomorrow it gets 20's! :)
Cole Trickle
10-11-2006, 01:18 PM
My '06 has 16's but just for today...tomorrow it gets 20's! :)
If you have a lift that will clear 37's I got some for sale I will make you a deal on.
Jordy
10-11-2006, 01:23 PM
My '06 has 16's but just for today...tomorrow it gets 20's! :)
Mine had the same problem. :D :D :D
If you have a lift that will clear 37's I got some for sale I will make you a deal on.
Hey, get your own thread!!! I looked at your 37's but didn't want to go that big. Stopped with 35's because I still do have to use my truck to tow some pretty substantial weight from time to time. ;)
kevnmcd
10-11-2006, 01:24 PM
If you have a lift that will clear 37's I got some for sale I will make you a deal on.
Won't fit...sorry. I only went with the leveling kit and 33's. Thanks for the offer.
Sorry for the jack, Jordy! :rollside: At least we are keeping it at the top of ya!
Cole Trickle
10-11-2006, 01:33 PM
Mine had the same problem. :D :D :D
Hey, get your own thread!!! I looked at your 37's but didn't want to go that big. Stopped with 35's because I still do have to use my truck to tow some pretty substantial weight from time to time. ;)
I hear ya.
The 20's and 37's look sweet and fit the H2 well but the new truck will probably only get a 4" lift with 35's.
If they were 35's I would yank the tires off and buy new wheels that fit a FURD.
Cole Trickle
10-11-2006, 01:34 PM
Rick....buy these wheels!!!!:D
BowTie Rick
10-11-2006, 01:50 PM
Hmmmmm... :idea: Interested yes but not my first choice. That is a better price than sponorship pricing from them and I do like that they are made in the US and not in China from used Coors Lite cans, Hmmmm, decisions, decisions :cry:
Jyruiz
10-11-2006, 01:52 PM
I wish these were six lugs. :(
djunkie
10-11-2006, 01:54 PM
really?
Is it an 05 or 04.5
Our 05 1500 switched back to Drums in the rear(For better braking) and now has a bigger disk in the front. 16" wheels won't fit.
Do you have disc or drums in the rear?
Disc all the way around. The stock rims are 16"
djunkie
10-11-2006, 01:55 PM
I hear ya.
The 20's and 37's look sweet and fit the H2 well but the new truck will probably only get a 4" lift with 35's.
If they were 35's I would yank the tires off and buy new wheels that fit a TURD .
:crossx: :crossx:
Cole Trickle
10-11-2006, 02:00 PM
Disc all the way around. The stock rims are 16"
Must have been something on the half tons.
I can't be a baller like you 8 lug Pimps!!
djunkie
10-11-2006, 02:02 PM
Must have been something on the half tons.
I can't be a baller like you 8 lug Pimps!!
Give me a break Mr. I have a supercharged Corvette in my garage. :rollside:
Jordy
10-11-2006, 02:05 PM
I wish these were six lugs. :(
They are 6 lugs with 2 spares. :D :D :D
Jyruiz
10-11-2006, 02:19 PM
They are 6 lugs with 2 spares. :D :D :D
Lol, cool, maybe I can sell the spare lugs. :D :)
phebus
10-11-2006, 05:28 PM
Hey Spam It Jordy :), I'm interested. Let's work on someone bringing them out to me, and we'll make a deal. The Absolute Regatta is this weekend, anyone from Phoenix area coming out for it?
Jordy
10-11-2006, 06:07 PM
Hey Spam It Jordy :), I'm interested. Let's work on someone bringing them out to me, and we'll make a deal. The Absolute Regatta is this weekend, anyone from Phoenix area coming out for it?
Let me check with the usual havasu gang and see who's going. Roln' 20's would be my first guess. :)
I don't know if it matters, but I was looking at the wheels this afternoon and one of them has a little spot where it either hit a rock or the guy with the tire machine got a little carried away. Just minor cosmetic, nothing structural. Just figured I'd let ya know. :D
And as far as the Spam It remark, that's funny considering this is probably the 2nd spam thread I've ever started and it's in the spam section, not in every post I make in the other sections. ;)
phebus
10-11-2006, 06:12 PM
And as far as the Spam It remark, that's funny considering this is probably the 2nd spam thread I've ever started and it's in the spam section, not in every post I make in the other sections. ;)
Just busting your balls, and while I'm at it, do the wheels come with a rap sheet? :)
phebus
10-11-2006, 06:12 PM
Just had to dig up a little dirt. All in fun :)
Jordy
10-11-2006, 06:13 PM
Just busting your balls, and while I'm at it, do the wheels come with a rap sheet? :)
I may or may not have commited a crime or 2 while using the wheels as a mode of transportation. Speeding would be the biggest offense in this truck. :D :D :D
stillgoin
10-11-2006, 10:38 PM
Jordy-
Check your PM
phebus
10-12-2006, 11:09 AM
If I buy these wheels, will I experience porposing problems? :)
Jordy
10-12-2006, 11:25 AM
If I buy these wheels, will I experience porposing problems? :)
No. They've got a built in training wheel, I mean center-pod to eliminate that problem. ;)
And what do you mean "IF" you buy them. You're on the hook now as they're bare wheels with no tires to kick and your name isn't Toby!!! :D :D :D
phebus
10-12-2006, 11:38 AM
I'm good......bring em :)
phebus
10-12-2006, 11:47 AM
Ask Patrick if I get a gallon of Hot Sauce with every purchase :rollside:
phebus
10-15-2006, 08:30 AM
Jordy, thank you very much. I was a little hesitant to buy them, but Patrick said there was no way he was hauling them back to Phoenix, and let me have them for $300.
Thanks again,
Rick
Jordy
10-15-2006, 11:04 AM
Jordy, thank you very much. I was a little hesitant to buy them, but Patrick said there was no way he was hauling them back to Phoenix, and let me have them for $300.
Thanks again,
Rick
Cool because I only wanted $200 for them anyway so I'm making an extra hundy. :D :D :D
phebus
10-15-2006, 11:49 AM
Cool because I only wanted $200 for them anyway so I'm making an extra hundy. :D :D :D
Very nice.............................................. ........rat bastard
Thanks for the wheels, I'm going to polish them up, and have them mounted later this week. :)
Rick
phebus
11-02-2006, 04:31 PM
Deal of the day.......
O.K., here we go. I bought these wheels from Jordy a few weeks ago, and haven't had them mounted yet. I have another direction that I want to put my money, so if someone wants to buy them, I'll take a hundred dollar hit, and I'll sell them for $400.
I have them here in Havasu, and you can either pick them up here, or my wife will be in So Cal tomorrow and Saturday.
They are Weld Mountain Crushers, 16X10, 8 lug Chevy wheel pattern. They were on his 2500HD.
OutCole'd
11-02-2006, 04:34 PM
Deal of the day.......
O.K., here we go. I bought these wheels from Jordy a few weeks ago, and haven't had them mounted yet. I have another direction that I want to put my money, so if someone wants to buy them, I'll take a hundred dollar hit, and I'll sell them for $400.
I have them here in Havasu, and you can either pick them up here, or my wife will be in So Cal tomorrow and Saturday.
They are Weld Mountain Crushers, 16X10, 8 lug Chevy wheel pattern. They were on his 2500HD.
Did you go to the TOBTEK school of investment strategy?
phebus
11-02-2006, 04:38 PM
There is a chance that if I dig up some funds, that I might be getting one of those golf carts on steroids :D
But, I have to act quick..........
OutCole'd
11-02-2006, 04:42 PM
There is a chance that if I dig up some funds, that I might be getting one of those golf carts on steroids :D
But, I have to act quick..........
Wow, that would be great!
OutCole'd
11-02-2006, 09:09 PM
:cool: :cool:
OutCole'd
11-05-2006, 10:26 AM
:cool: :crossx: :skull:
phebus
11-07-2006, 09:30 AM
For those that have requested, here are pictures (shitty ones) of the actual wheels.
http://www.hotboatpics.com/pics/data/500/1753DSCN1859.JPG
http://www.hotboatpics.com/pics/data/500/1753DSCN1858.JPG
Cole Trickle
11-07-2006, 10:03 AM
For those that have requested, here are pictures (shitty ones) of the actual wheels.
http://www.hotboatpics.com/pics/data/500/1753DSCN1859.JPG
http://www.hotboatpics.com/pics/data/500/1753DSCN1858.JPG
Someone buy these wheels so Rick can join the Rhino nation and stop begging to ride on the current owners laps!! :argue: :crossx: :p :yuk: :rollside:
Jordy
11-07-2006, 10:16 AM
My current wheels are 16 x 8 with brand new BFG's, think that the tires will fit okay?
What size tires??? I ran them with 285/75R16's.
OutCole'd
11-07-2006, 10:52 AM
Someone buy these wheels so Rick can join the Rhino nation and stop begging to ride on the current owners laps!! :argue: :crossx: :p :yuk: :rollside:
That won't stop him, friggen homo.
Cole Trickle
11-07-2006, 10:58 AM
That won't stop him, friggen homo.
Always looking for a lap ride and a bumpy road.
gay..... :crossx:
Jordy
11-07-2006, 01:35 PM
All Terrains, 265/75r16'S...
I don't know how they'd look with 265's on them. Might have a striking resemblance to some of the Daytons with tire's stretched out balloon style. The 285's were really pretty square with the wheel.
phebus
11-08-2006, 07:24 AM
ttt :)
stillgoin
11-11-2006, 12:24 AM
Didn't you say up above, you paid $300 for them? $400 sounds like you;re makin' money. Not a bad idea, but I like the wheels. Where are you at?
phebus
11-11-2006, 06:56 AM
Didn't you say up above, you paid $300 for them? $400 sounds like you;re makin' money. Not a bad idea, but I like the wheels. Where are you at?
Jordy had Roln 20's deliver them to me and pick up the $500 I was paying for them. I then went on to post that I only gave Patrick $300, to get a reaction out of Jordy.. The fact was I paid $500. but just wanted to work Jordy a little.