Official Parts Swapmeet Spam Thread......

[396_WAYS_TO_SPIT]

Well since they moved all the threads then I will start this one here! Please post all your BOAT stuff here and dont forget pictures;) Lets help each other finish projects. If you guys wanna start a car,truck,rail,quad,car audio, etc thread then lets do it. Lets try to be civialized about it please;)
396(michael)

[dmontzsta]

I have a set of Bassett headers for a Ford FE. They need to be re-coated. I will let them go for $75.

[DelawareDave]

ST-
complete Berk 12 JA-A Pump with a Berkeley "A" impeller, C Bowl and nozzel for sale
What is the diff between this pump and a JC pump, if it has the JC bowl & nozzle? What is the diff in the suction housing between the two?

[tahiti cowboy]

I have one new full set of arp head studs for 429/460 ford $100 plus shipping one brand new s/x fuel reg part# 15402 $80 plus shipping one nice shape berkley A impeller $60 plus shipping and a set of bassett thru trans headers for 429/460 ford nice shape butt has one weld spot on bottem where one weep hole rusted out butt fixed now $300 plus shipping thanks gary

[YeLLowBoaT]

Rebuildable holley 4778 or 4779 Hell at this point I would take mech or vac 700-750 cfm holley

[Brooski]

4hrs 56min left !!!
Jim, I think you need to change your name to Spammin' Thunder!! :220v:
How much can you get me a Place Diverter nozzle for. I have the cable and control..

[Squirtin Thunder]

Jim, I think you need to change your name to Spammin' Thunder!! :220v:
How much can you get me a Place Diverter nozzle for. I have the cable and control..
So I am in the right place, Damn I was woried about that !!! :cool:

[slotracer]

Rebuildable holley 4778 or 4779 Hell at this point I would take mech or vac 700-750 cfm holley
i have a new 700 demon in the box. $200.00 and its yours.
pat(slotracer) :rollside:

[Keyser]

i have a new 700 demon in the box. $200.00 and its yours.
pat(slotracer) :rollside:
What type?
vac or mech secondarys?

[slotracer]

i will check tomorrow and post up the part number and what type.
pat(slotracer) :rollside:

[slotracer]

it's a 725 demon part #6402020ve. vac. sec's. flow # @ wot is 230 pph. its almost brand new.
pat(slotracer) :)

[Keyser]

it's a 725 demon part #6402020ve. vac. sec's. flow # @ wot is 230 pph. its almost brand new.
pat(slotracer) :)
It looks like it might be a road demon jr., I'm looking for a speed demon or a regular road demon. I f you could please post pics.

[slotracer]

its a road demon jr. electric choke. whats the difference in the carbs?
pat(slotracer) :)

[Keyser]

its a road demon jr. electric choke. whats the difference in the carbs?
pat(slotracer) :)
the road jr. from what I hear is for smaller vehicles. i'm running a heavy hull with a 455 and I want to make sure it will flow enough.

[Nucking futs]

TRW pistons and rods with arp studs
TRW part # L2307 AF30 about 12.5 : 1 with 119c.
4" crank
6.135 rod length
300.00+ shipping
Gen 6 oval port heads, fully worked. bigger valves 2.19 / 1.84 new springs, guides, tit. keepers,10* locks and valve job 10 hrs. ago.
600.00 + shipping

[Squirtin Thunder]

http://www.fordforums.com/images/smilies/bump.gifhttp://www.fordforums.com/images/smilies/bump.gifhttp://www.fordforums.com/images/smilies/bump.gifhttp://www.fordforums.com/images/smilies/bump.gifhttp://www.fordforums.com/images/smilies/bump.gifhttp://www.fordforums.com/images/smilies/bump.gif

[Squirtin Thunder]

Berkeley "G" Bowl....................................$300 or B/O
http://www.***boat.com/image_center/data/520/2311Pict0927-med.jpghttp://www.***boat.com/image_center/data/520/2311Pict0926-med.jpg
Stock 12j B,G intake grate ............$30 or B/O
I can also help you out on a Berkeley parts you may need at special HBers low pricing !!!
Two sets of Hi Tech Poly Locks for 7/16 studs #4000-16 for $45.00 each set.
Four Water Outlet Gaskets Fel-Pro #30060 for $1.00 each
K&N 4" x 14" Filter NEW in Box and sealed......... $45 or B/O
K&N Pre-Filters 1 Blue & 1 Black 4x14 .......$25 each or B/O
Prestolite Marine single point Dist. ...$45 or B/O Ready for Crane XRI or Pertronix !!!!
CV Products 5/16 8.700 (stock D0 head pushrod) one piece push rods used for set-up and 10min. on dyno $80 or B/O
Ford Motorsport
M-6250-A460 .493 .502 / 288 292 / 216 220 ........... $70 or B/O
Stock Ford 429car oil pan .......$25 or B/O
Two new DynoMax UltraFlo mufflers in boxes
pn# 17218 2 1/2 in & out ............$110 pair or B/O
Pair of D3VE head unported with valves $150
I am looking for a Sanger Mini Daycruiser Jet hull. I would prefer the newer styled bottom version. I don't care what it looks like, interior does not need to be there, no pump needed, just a basic bare hull !!!
Goodhttp://www2.***boat.com/image_center/data/520/1177sangerrear-med.JPG Badhttp://www2.***boat.com/image_center/data/500/2311Pict0552-med.jpg
I know there has to be one some where just sitting collecting dust or leaves !!!
Thank you and please keep an eye out for one sitting somwhere.
Please check out my Ebay store;
Code Blue Racing (http://stores.ebay.com/codeblueracing_W0QQstorecachemissZcodeblueracingQQ tZkm)

[Squirtin Thunder]

http://www.fordforums.com/images/smilies/bump.gifhttp://www.fordforums.com/images/smilies/bump.gifhttp://www.fordforums.com/images/smilies/bump.gifhttp://www.fordforums.com/images/smilies/bump.gifhttp://www.fordforums.com/images/smilies/bump.gifhttp://www.fordforums.com/images/smilies/bump.gif

[sanger rat]

I have one new full set of arp head studs for 429/460 ford $100 plus shipping one brand new s/x fuel reg part# 15402 $80 plus shipping one nice shape berkley A impeller $60 plus shipping and a set of bassett thru trans headers for 429/460 ford nice shape butt has one weld spot on bottem where one weep hole rusted out butt fixed now $300 plus shipping thanks gary
Some pics. http://www.***boat.com/image_center/data/504/1937000_0001.jpg http://www.***boat.com/image_center/data/504/19370002.jpg http://www.***boat.com/image_center/data/504/19370003.jpg http://www.***boat.com/image_center/data/504/19370004.jpg

[Squirtin Thunder]

I can also help you out on a Berkeley impeller of your choice !!!
Or any other Berkeley parts you may need at special HBers low pricing !!!
Code Blue Racing Ebay Store (http://stores.ebay.com/codeblueracing_W0QQstorecachemissZcodeblueracingQQ tZkm)
Ride Plate Strut Brace $35
http://www.***boat.com/image_center/data/520/2311Pict1242-med.jpg
Place Diverter Tiller Arm $45
http://www.***boat.com/image_center/data/520/2311Pict1241-med.jpg
Steering extention 4" $50
http://www.***boat.com/image_center/data/520/2311Pict1240-med.jpg
Header Bolts $5
http://www.***boat.com/image_center/data/520/2311Pict1239-med.jpg
BBC Oil Filter adapter $28
http://www.***boat.com/image_center/data/520/2311Pict1238-med.jpg
Alt. braket $10
http://www.***boat.com/image_center/data/520/2311Pict1237-med.jpg
Misc. Water and Fuel fittings $35
http://www.***boat.com/image_center/data/520/2311Pict1236-med.jpg
Formuling 12.5" wheel and tapperd shaft 3" adapter $90
http://www.***boat.com/image_center/data/520/2311Pict1243-med.jpghttp://www.***boat.com/image_center/data/520/2311Pict1244-med.jpg

[Squirtin Thunder]

More great parts;
Holley Fuel Pump $20
http://www.***boat.com/image_center/data/520/2311Pict1250-med.jpg

[dmontzsta]

Jim, I just noticed you had alot of stuff on ebay. You should change the keyword to "V-Drive" I bet you would get some more sales. Especially on stuff like the T valve, pleasure jacket, billet paddle, battery boxes, water control valve, header covers, and a few others.

[Squirtin Thunder]

Jim, I just noticed you had alot of stuff on ebay. You should change the keyword to "V-Drive" I bet you would get some more sales. Especially on stuff like the T valve, pleasure jacket, billet paddle, battery boxes, water control valve, header covers, and a few others.
Don I was thinking with boat in there it would help. Damn key words !!!
Thanks
Jim

[dmontzsta]

Don I was thinking with boat in there it would help. Damn key words !!!
Thanks
Jim
No problem, you have some good prices on some good stuff.

[Squirtin Thunder]

Thanks Don !!!

[donzi22]

I have a holley 750 vaccum secondary that needs to be freshened up $100
and that includes the carb kit. Plus shipping

[jimthetoolman]

New in box JE -SRP Pistons ... Chevy 30 over 502 10:1 dome part number #212140 will sell or trade?
Used 3 times Yerf Dog Go Cart. 6.5 horse. Seats 2. make offer needs to go.
bbc logs with snails
will take cash or trade?

[Squirtin Thunder]

http://www.***boat.com/forums/customavatars/avatar4330_2.gif
And yes that engine shines that bright in person !!!

[jimthetoolman]

Well thank you Jim. Its for sale. Buying another boat this weekend (V-drive) Going to have 2 boats let me know if you know anyone looking for a jet.
79 tahiti 18 foot bubble deck 509 chevrolet all chrome tunnel ram with polished carbs, hull and factory gell coat in outstanding condition. Engine has about 10 hours on it. Blower J&E pistons, comp cam springs, double roller t.c.. steel crank, comp cam extreme marine camshaft, balanced, rectangular heads, roller rockers. Sounds and runs great.

[Red Rocket]

I am interested in the log manifolds. What brand are they and do you have any pictures?

[gptoyman]

Need a 10 quart oil pan for a 74 taylor jet boat
contact me at 972-672-2082
Toyman
Ron

[dripnwet]

I HAVE AN EDELBROCK TUNNEL RAM, NITROUS PRO SHOT FOGGER INJECTION, DUAL HOLLEY 750'S, BARRY GRANT 4 PORT FUEL REGULATOR, NEW FUEL PRESSURE GAGE, ANADIZED NOS BOTTLE. BOLT ON A BBC AND GO 4 1500.00.
lenco 2 spd 33% fresh from lenco, $ 1500.00. MEZIERRE POLISHED ALLUMINUM ELECTRIC WATER PUMP WITH BUILT IN TANK, $ 300.00.
CHRIS 360 241 3430 PST

[Squirtin Thunder]

One pair of rebuildable E8 BBF heads $100
http://www.***boat.com/image_center/data/520/2311Pict1277-med.jpghttp://www.***boat.com/image_center/data/520/2311Pict1278-med.jpghttp://www.***boat.com/image_center/data/520/2311Pict1279-med.jpg
One pair of rebuildable D3 Heads $150
http://www.***boat.com/image_center/data/520/2311Pict1280-med.jpghttp://www.***boat.com/image_center/data/520/2311Pict1281-med.jpghttp://www.***boat.com/image_center/data/520/2311Pict1282-med.jpg

[hondajoey]

454 Bassett Headers one of them needs to be welded a little on ebay now.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=4610978795&sspagename=STRK%3AMESE%3AIT

[Bobby Knight]

Need a 10 quart oil pan for a 74 taylor jet boat
contact me at 972-672-2082
Toyman
Ron
I have a 10 ot. pan that has been damaged and repaired. It was on an engine that came in aboat we wanted just for the hull. I ran the engine for a short time before removing and didn't see any leaks.It appears to be a milodon jet pan. I am askinjg $75 for it.

[Squirtin Thunder]

Good used impeller shaft $180 or B/O
More pics to fallow
http://www.cpperformance.com/images/150-M-04416.jpg

[abraman1326]

I have a 10 ot. pan that has been damaged and repaired. It was on an engine that came in aboat we wanted just for the hull. I ran the engine for a short time before removing and didn't see any leaks.It appears to be a milodon jet pan. I am askinjg $75 for it.
What motor is it for???
BRA

[Squirtin Thunder]

One pair of rebuildable E8 BBF heads $100
http://www.***boat.com/image_center/data/520/2311Pict1277-med.jpghttp://www.***boat.com/image_center/data/520/2311Pict1278-med.jpghttp://www.***boat.com/image_center/data/520/2311Pict1279-med.jpg
One pair of rebuildable D3 Heads $150
http://www.***boat.com/image_center/data/520/2311Pict1280-med.jpghttp://www.***boat.com/image_center/data/520/2311Pict1281-med.jpghttp://www.***boat.com/image_center/data/520/2311Pict1282-med.jpg
Good used impeller shaft $180 or B/O
http://www.cpperformance.com/images/150-M-04416.jpg
Holley Fuel Pump $20
http://www.***boat.com/image_center/data/520/2311Pict1250-med.jpg
Code Blue Racing Ebay Store (http://stores.ebay.com/codeblueracing_W0QQstorecachemissZcodeblueracingQQ tZkm)

[Squirtin Thunder]

:cool: Berkeley "G" Bowl....................................$300 or B/O
http://www.***boat.com/image_center/data/520/2311Pict0927-med.jpghttp://www.***boat.com/image_center/data/520/2311Pict0926-med.jpg
Stock 12j B,G intake grate ............$30 or B/O
I can also help you out on a Berkeley parts you may need at special HBers low pricing !!!
Two sets of Hi Tech Poly Locks for 7/16 studs #4000-16 for $45.00 each set.
Four Water Outlet Gaskets Fel-Pro #30060 for $1.00 each
K&N 4" x 14" Filter NEW in Box and sealed......... $45 or B/O
K&N Pre-Filters 1 Blue & 1 Black 4x14 .......$25 each or B/O
Prestolite Marine single point Dist. ...$45 or B/O Ready for Crane XRI or Pertronix !!!!
CV Products 5/16 8.700 (stock D0 head pushrod) one piece push rods used for set-up and 10min. on dyno $80 or B/O
Ford Motorsport
M-6250-A460 .493 .502 / 288 292 / 216 220 ........... $70 or B/O
Stock Ford 429car oil pan .......$25 or B/O
Two new DynoMax UltraFlo mufflers in boxes
pn# 17218 2 1/2 in & out ............$110 pair or B/O
Pair of D3VE head unported with valves $150
I am looking for a Sanger Mini Daycruiser Jet hull. I would prefer the newer styled bottom version. I don't care what it looks like, interior does not need to be there, no pump needed, just a basic bare hull !!!
Goodhttp://www2.***boat.com/image_center/data/520/1177sangerrear-med.JPG Badhttp://www2.***boat.com/image_center/data/500/2311Pict0552-med.jpg
I know there has to be one some where just sitting collecting dust or leaves !!!
Thank you and please keep an eye out for one sitting somwhere.
Please check out my Ebay store;
Code Blue Racing (http://stores.ebay.com/codeblueracing_W0QQstorecachemissZcodeblueracingQQ tZkm)

[Squirtin Thunder]

I can also help you out on a Berkeley impeller of your choice !!!
Or any other Berkeley parts you may need at special HBers low pricing !!!
Code Blue Racing Ebay Store (http://stores.ebay.com/codeblueracing_W0QQstorecachemissZcodeblueracingQQ tZkm)
Ride Plate Strut Brace $35
http://www.***boat.com/image_center/data/520/2311Pict1242-med.jpg
Place Diverter Tiller Arm $45
http://www.***boat.com/image_center/data/520/2311Pict1241-med.jpg
Steering extention 4" $50
http://www.***boat.com/image_center/data/520/2311Pict1240-med.jpg
Header Bolts $5
http://www.***boat.com/image_center/data/520/2311Pict1239-med.jpg
BBC Oil Filter adapter $28
http://www.***boat.com/image_center/data/520/2311Pict1238-med.jpg
Alt. braket $10
http://www.***boat.com/image_center/data/520/2311Pict1237-med.jpg
Misc. Water and Fuel fittings $35
http://www.***boat.com/image_center/data/520/2311Pict1236-med.jpg
Formuling 12.5" wheel and tapperd shaft 3" adapter $90
http://www.***boat.com/image_center/data/520/2311Pict1243-med.jpghttp://www.***boat.com/image_center/data/520/2311Pict1244-med.jpg

[abraman1326]

Anybody have a 460 block for sale. Preferably rebuilt already, but anything anyone has would be helpful. Please let me know. You can e mail me @ abraman1326@aol.com. Thank you in advance...

[Squirtin Thunder]

I may have one that I am willing to sell, It is a '69 complete running, was when pulled, 460BBF. It has the C9 heads and is a great builder. I am looking to get about $500 for it.
Thanks
Jim

[abraman1326]

I may have one that I am willing to sell, It is a '69 complete running, was when pulled, 460BBF. It has the C9 heads and is a great builder. I am looking to get about $500 for it.
Thanks
Jim
Send me a PM, or e mail me w/ more info and maybe some pics. I am interested. abraman1326@aol.com. Thank you...
BRA

[tahiti cowboy]

Some pics. http://www.***boat.com/image_center/data/504/1937000_0001.jpg http://www.***boat.com/image_center/data/504/19370002.jpg http://www.***boat.com/image_center/data/504/19370003.jpg http://www.***boat.com/image_center/data/504/19370004.jpg
impeller sold

[Squirtin Thunder]

Gary,
I recall buying one but haven't seen it.
Is going to Duane right ???
Thanks
Jim

[Squirtin Thunder]

I think it is time for a bump !!! :yuk:
I can also help you out on a Berkeley impeller of your choice !!!
Or any other Berkeley parts you may need at special HBers low pricing !!!
Code Blue Racing Ebay Store (http://stores.ebay.com/codeblueracing_W0QQstorecachemissZcodeblueracingQQ tZkm)
Steering extention 4" $50
http://www.***boat.com/image_center/data/520/2311Pict1240-med.jpg
Header Bolts $5
http://www.***boat.com/image_center/data/520/2311Pict1239-med.jpg
BBC Oil Filter adapter $28
http://www.***boat.com/image_center/data/520/2311Pict1238-med.jpg
Alt. braket $10
http://www.***boat.com/image_center/data/520/2311Pict1237-med.jpg
Misc. Water and Fuel fittings $35
http://www.***boat.com/image_center/data/520/2311Pict1236-med.jpg
Formuling 12.5" wheel and tapperd shaft 3" adapter $90
http://www.***boat.com/image_center/data/520/2311Pict1243-med.jpghttp://www.***boat.com/image_center/data/520/2311Pict1244-med.jpg

[Squirtin Thunder]

I can also help you out on a Berkeley parts you may need at special HBers low pricing !!!
Two sets of Hi Tech Poly Locks for 7/16 studs #4000-16 for $45.00 each set.
Four Water Outlet Gaskets Fel-Pro #30060 for $1.00 each
K&N 4" x 14" Filter NEW in Box and sealed......... $45 or B/O
K&N Pre-Filters 1 Blue & 1 Black 4x14 .......$25 each or B/O
Prestolite Marine single point Dist. ...$45 or B/O Ready for Crane XRI or Pertronix !!!!
CV Products 5/16 8.700 (stock D0 head pushrod) one piece push rods used for set-up and 10min. on dyno $80 or B/O
Ford Motorsport
M-6250-A460 .493 .502 / 288 292 / 216 220 ........... $70 or B/O
Stock Ford 429car oil pan .......$25 or B/O
Two new DynoMax UltraFlo mufflers in boxes
pn# 17218 2 1/2 in & out ............$110 pair or B/O
Pair of D3VE head unported with valves $150
I am looking for a Sanger Mini Daycruiser Jet hull. I would prefer the newer styled bottom version. I don't care what it looks like, interior does not need to be there, no pump needed, just a basic bare hull !!!
Goodhttp://www2.***boat.com/image_center/data/520/1177sangerrear-med.JPG Badhttp://www2.***boat.com/image_center/data/500/2311Pict0552-med.jpg
I know there has to be one some where just sitting collecting dust or leaves !!!
Thank you and please keep an eye out for one sitting somwhere.[/SIZE]
Please check out my Ebay store;
Code Blue Racing (http://stores.ebay.com/codeblueracing_W0QQstorecachemissZcodeblueracingQQ tZkm)