PDA

View Full Version : Oil Cooler


USMC1812
03-07-2003, 11:19 AM
What oil cooler would you guys suggest for a Gen V 502?
Thanks,
Doug
GofastRacer
03-07-2003, 11:24 AM
USMC1812:
What oil cooler would you guys suggest for a Gen V 502?
Thanks,
Doug This is what I use!.. :cool:
Dan Olson (http://www.olsonmotorsports.com/products/oilcoolers.html)
USMC1812
03-07-2003, 11:36 AM
happy with it? Where does does it mount?
Thanks,
Doug
GofastRacer
03-07-2003, 11:41 AM
I've had it since the 80's, works bitchin!. It mounts to the oil filter pad and the filter mounts to the cooler!.. :cool:
http://www.***boat.com/image_center/data/500/12Oil_Cooler-med.jpg
[ March 07, 2003, 11:50 AM: Message edited by: GofastRacer ]
Craig
03-07-2003, 11:52 AM
I've been using this Eddie Marine oil/power steering cooler for about 3 years now.
http://www.***boat.com/image_center/data/500/140oil_cooler-med.jpg
GofastRacer
03-07-2003, 01:15 PM
That's a good one!.. :cool:
Infomaniac
03-07-2003, 01:43 PM
That Olson is a good one. Can only use it if you have rail type engine mounts. Engine plate type mounts. Gets in the way of the stock mounts. I made an adapter and mounted one remote.