PDA

View Full Version : I need a back seat for my Rhino



Speedin' Ian
10-23-2006, 08:11 AM
Where's the best place to get one?
Thanks

BoatFloating
10-23-2006, 08:22 AM
Where's the best place to get one?
Thanks
PRP in Temecula.

TOBTEK
10-23-2006, 08:57 AM
OR get some "take off" OEM front seats..... looks OEM and inexpensive.
Whats the latest with people getting tickets for people in the back??

TOBTEK
10-23-2006, 09:00 AM
http://cgi.ebay.com/ebaymotors/Yamaha-Rhino-grey-SE-front-seats-and-handles_W0QQcmdZViewItemQQcategoryZ43970QQihZ015QQ itemZ250040187497QQrdZ1QQsspagenameZWDVW
here are some SE seats. IM SURE you can get a pair for around 100 dollars ALL DAY LONG.

Marty Gras
10-23-2006, 08:15 PM
I have an UNUSED 2005 Escalade ESV third seat. It is "that ivory leather color" and never been sat on. You can have it for free! Just let me know if it fits your "toy" and come over to pick it up. Never used the back (second row of bucket seats) seats, let alone the "way back ones". Happy to give it to you, we will never use it! Hope you can make it fit!

Todd969
10-24-2006, 06:15 AM
I have an UNUSED 2005 Escalade ESV third seat. It is "that ivory leather color" and never been sat on. You can have it for free! Just let me know if it fits your "toy" and come over to pick it up. Never used the back (second row of bucket seats) seats, let alone the "way back ones". Happy to give it to you, we will never use it! Hope you can make it fit!
If I was doing backseats and that fit I would be over in 2.2 seconds. What's the width? The Rhino bed is 42".
BTW, how are ya?

Todd969
10-24-2006, 06:18 AM
Here's an Arctic Cat that used rhino seats.
http://www.***boat.com/image_center/data/500/1634101_1204.JPG
http://www.***boat.com/image_center/data/500/1634101_1205.JPG

Trailer Park Casanova
10-24-2006, 06:22 AM
JC Whitney CJ 5 rear seats work.
The catalog doesnt feature the same selection as on line, but their's a lot to choose from and all different kinds of features for them,, and last we checked, the prices started about $200

Todd969
10-24-2006, 06:27 AM
I like what BigDoug did. Found a late 60's early 70's bronco rear seat.
http://www.***boat.com/image_center/data/500/1634PICT0005.JPG

sigepmock
10-24-2006, 06:33 AM
I wouldn't think about doing a back seat without doing a full cage to protect the occupants. Even if i only planned on using it for putting around......it only takes one time to really hurt someone.
I got my rear seats and cage from Brian(Evo) at Long Travel Rhino. It's a little pricey but well worth it to have the piece of mind that if for what ever reason you ever do roll the thing...you want be hurting or killing someone you really care about, precious cargo IMO.
www.longtravelrhino.com
Good luck,
Chris
http://www.***boat.com/image_center/data/520/3644100_1248.JPG
http://www.***boat.com/image_center/data/520/3644100_1242.JPG

Trailer Park Casanova
10-24-2006, 06:36 AM
Ya gotta have a cage and 4 point belts or the LEOS write ya and kick ya outta the dunes.
It's a throwback to the Suzuki Samuries
Families without a clue were driving them off road and rolling them and killing and paralizing family members.
They came with no rollover protection.
Had another one just last year.
Jesus Christ it was sad.

Jyruiz
10-24-2006, 07:27 AM
I wouldn't think about doing a back seat without doing a full cage to protect the occupants. Even if i only planned on using it for putting around......it only takes one time to really hurt someone.
I got my rear seats and cage from Brian(Evo) at Long Travel Rhino. It's a little pricey but well worth it to have the piece of mind that if for what ever reason you ever do roll the thing...you want be hurting or killing someone you really care about, precious cargo IMO.
I could not agree with you more, and again, your Rhino is sick.

Cole Trickle
10-24-2006, 08:03 AM
I wouldn't think about doing a back seat without doing a full cage to protect the occupants. Even if i only planned on using it for putting around......it only takes one time to really hurt someone.
I got my rear seats and cage from Brian(Evo) at Long Travel Rhino. It's a little pricey but well worth it to have the piece of mind that if for what ever reason you ever do roll the thing...you want be hurting or killing someone you really care about, precious cargo IMO.
www.longtravelrhino.com
Good luck,
Chris
Agreed...
Everytime I see a picture of that Artic cat without a rear cage it makes me nervous. :boxed: :)
These side by sides are too heavy to mess around with.

BoatFloating
10-24-2006, 08:55 AM
Agreed...
Everytime I see a picture of that Artic cat without a rear cage it makes me nervous. :boxed: :)
These side by sides are too heavy to mess around with.
You don't need a rear cage with a back seat.... :crossx:
http://www.***boat.com/image_center/data/520/1502Glamis_1.jpg
I was just checking to see if my skid plates were ok..... :idea:

Cole Trickle
10-24-2006, 09:01 AM
You don't need a rear cage with a back seat.... :crossx:
http://www.***boat.com/image_center/data/520/1502Glamis_1.jpg
I was just checking to see if my skid plates were ok..... :idea:
Looks like everyone walked away so the skid plates did there job!!! :p :D
I have no problem beating up on machinery. Cage,Harness and some legminders and it's time to raise some hell!!!
I just don't want to hurt family or friends;)

sigepmock
10-24-2006, 09:11 AM
You don't need a rear cage with a back seat.... :crossx:
http://www.***boat.com/image_center/data/520/1502Glamis_1.jpg
I was just checking to see if my skid plates were ok..... :idea:
LOL I love that pic everytime I see it :crossx:

OutCole'd
10-24-2006, 09:21 AM
You don't need a rear cage with a back seat.... :crossx:
I was just checking to see if my skid plates were ok..... :idea:
Rocky, you going on the 11th??

BoatFloating
10-24-2006, 09:24 AM
LOL I love that pic everytime I see it :crossx:
Great thing about that is no damage to the cage or Rhino even better no damage to me or the wife..... :) Evo22's cage works great at least 2 times....

BoatFloating
10-24-2006, 09:27 AM
Rocky, you going on the 11th??
No I'm going to be in Glamis to see what my skid plates look like..... :) :220v: :skull:

OutCole'd
10-24-2006, 09:29 AM
No I'm going to be in Glamis to see what my skid plates look like..... :) :220v: :skull:
You can check them out in Havasu also you know. Hell, you can check them out every time you get in that thing.

sigepmock
10-24-2006, 09:41 AM
Great thing about that is no damage to the cage or Rhino even better no damage to me or the wife..... :) Evo22's cage works great at least 2 times....
You were the one that sold me on Brian's cage. If it can survive you then it's good enough for me and the my family :crossx:

BigDoug
10-24-2006, 09:53 AM
We talked to the local po po's and he said "out here in Az. it's like a truck and you don't need a roll cage but need seat belts"........we just cruise around town with the occasional off road ride, i'll tell you now that we won't be doing anything stupid or get myself in a predicament like the above pic of the rhino.
The back seat is for when company comes to town and we can go to the chanell or site 6 (favorite) but nothing serious like jumps, whoops etc.
My back seat came from ebay and was a thrashed white seat that needed re-covered but the base was solid, after shipping and new upholstery im in it for $300.00 and it's different too, we get alot of compliments about it, i won't be surprised if someone else does too cause it looks nice and fits the rhino as well as our Arctic Cat.

BoatFloating
10-24-2006, 10:18 AM
You can check them out in Havasu also you know. Hell, you can check them out every time you get in that thing.
I need to put wheels on my roof....... Get out to Dumont one of these times and we'll roll together no pun intended.... :)
You were the one that sold me on Brian's cage. If it can survive you then it's good enough for me and the my family :crossx:
The 2nd time my boy (8) was in the back and all good. I'll think I'll try and keep it on the wheels this year. Well at least two of them.... :220v:

Speedin' Ian
10-24-2006, 03:16 PM
Thanks for the advise guys.
We are building a full cage (my brother is a fabricator) but I need to order the seat first so we know the dimensions.