offset needed for trailer rims

[396_WAYS_TO_SPIT]

whats the offset for rims on a standard boat trailer? I am looking to run a set of 18's on my trailer....
396

[Sleek-Jet]

Not to be a total smartass, but can't you just measure the ones you have??

[Devilman]

Not to be a total smartass, but can't you just measure the ones you have??
Even with the disclaimer, thats funny..... :cool:

[460 jus getn it]

396, just ask devilman to let you buy these from him. although it might lower his table height. but im sure he can find some milk cartons to go with the table.........http://www.***boat.com/image_center/data/520/1570beerpong_1.jpg

[AZKC]

Measuring is the best way, all trailers are close to the same but if your going custom, throw a tape measure on it. And if your running 18's I'm guessin we won't be seeing you at Apache over the Summer :idea:

[Devilman]

396, just ask devilman to let you buy these from him. although it might lower his table height. but im sure he can find some milk cartons to go with the table.........http://www.***boat.com/image_center/data/520/1570beerpong_1.jpg
I'll sure sell them to him, no problem there. But you know he already has a set of spinners on layaway at Autozone..... :crossx: :D

[460 jus getn it]

I'll sure sell them to him, no problem there. But you know he already has a set of spinners on layaway at Autozone..... :crossx: :Dshit where is my giggle smilie....o well aww hahahahahahahahahahha

[455Rocket]

When I was rebuilding my trailer I heard that the std. is a Chevy 5 lug pattern...
I had to replace a rim when I got my boat, and the dudes at America's Tire didn't know what size rim so they came out w/ a cool measuring tool and fitted one just to make sure before ordering a replacement

[olbiezer]

i just changed out my wheels and my trailer had 4 and 1/2 inch 5 bolt pattern as far as offset there could be very little with my trailer or tires would rub the wood inside fenders.......

[396_WAYS_TO_SPIT]

i know the bolt pattern is a 5 on 4 1/2 . I guess I'll just have to mesaure the back spacing......

[blown428fe]

396- I think it should be a standard offset, they should know. Measure the backspace you have now.

[Bradf]

Im curious to see what its going to look like. I picture it looking a bit funny lol

[dmontzsta]

18s? pussy.
You need to rock dubs! :)

[garret]

whats the offset for rims on a standard boat trailer? I am looking to run a set of 18's on my trailer....
396
I have a set of 18 on my boat trailer i used a standard offset for a 88-98 Chevy fullsize truck and used a 1 1/4 wheel spacer with the chevy lug patern so i did not have to fill and redrill my wheels. worked really good and looks bad ass!!!
http://www.***boat.com/image_center/data/520/2780cbbb_015.jpg
Ignore the tweaker looking dude with man boobs!!!!!

[garret]

Im curious to see what its going to look like. I picture it looking a bit funny lol
looks bad ass
http://www.***boat.com/image_center/data/520/2780cbbb_015.jpg

[396_WAYS_TO_SPIT]

18s? pussy.
You need to rock dubs! :)
My bro has dubs on his and it looks killer;) Dont tempt me don, I might drop spinners n that b!tch :crossx: :crossx: :crossx:

[396_WAYS_TO_SPIT]

I have a set of 18 on my boat trailer i used a standard offset for a 88-98 Chevy fullsize truck and used a 1 1/4 wheel spacer with the chevy lug patern so i did not have to fill and redrill my wheels. worked really good and looks bad ass!!!
Ignore the tweaker looking dude with man boobs!!!!!
Your setup looks killer;) I will call you when I am in the process of doing it;)
396

[MACHINEHEAD]

13" dayton triple G 175/50/13 euro T/A YEA!

[396_WAYS_TO_SPIT]

13" dayton triple G 175/50/13 euro T/A YEA!
What you know about those? We used to roll on those back in 1991 :rollside:

[Big Kahunaa]

13" dayton triple G 175/50/13 euro T/A YEA!
Hell yeh do it

[396_WAYS_TO_SPIT]

Lol, you guys are cracking me up:D