PDA

View Full Version : Sealing ATV trailer boards



2Driver
11-08-2006, 03:42 PM
The flooring is the typical 2x6's but unfinished on my 6x 12' trailer.
Anybody have any first hand experience for protecting the raw wood that would not make the surface slippery in the process?
THanks

79Challenger
11-08-2006, 03:46 PM
A good two part and silica sand

2Driver
11-08-2006, 03:54 PM
A good two part and silica sand
2 part what?

brianthomas
11-08-2006, 04:07 PM
Call Promark 626-472-0081 they sell an acrylic tennis court non skid paint that is for tennis courts and pool decks but works on wood too. Think of the non skid you see on tennis courts. It is great in my enclosed trailer. If memory serves, they call it Tough Track.

YeLLowBoaT
11-08-2006, 04:09 PM
A good oil base primer, then a ext oil base with some sand mixed in.

phebus
11-08-2006, 04:24 PM
I just stained mine with outdoor deck stain. Worked good, and easy touch up if needed.

Outnumbered
11-08-2006, 11:14 PM
This is good stuff but may make it a little slick at first...
http://superdeck.com/palett19.htm