19 daytona 4 sale

[dragstr19]

1982 needs work great project. in phx az 5000 obo

[Flying Sterling]

Looks like maybe missing interior?

[dragstr19]

Looks like maybe missing interior?
i have a pair of fiberglass buckets with new upolstery

[PETEROC]

Check your private messages for my phone. Thx

[Mr. Crusader 83]

what kind of work does it need?
does it run?
specs on motor please

[396_WAYS_TO_SPIT]

Damn randy, what are you going to do now? I know you have a boat lot over there:p

[dragstr19]

what kind of work does it need?
does it run?
specs on motor please
motor runs but is low on compression, only has about 6hrs on it. mild porting big bore garbs cross drilled intake 14 pedal reeds dry stacked with some kinda tunner i cant remember bobs nose cone high water pick up manual jack plate and its a 2.4 200 also light wieght cowl. needs carpet and seets mounted and what ever motor work, when i had motor built the builder used diamond hone on crome bores and she ate the rings. i was still trying to break it in when i figured out what had happend.

[dragstr19]

Damn randy, what are you going to do now? I know you have a boat lot over there:p
im trying to come up with gas money for the 588

[dragstr19]

motor runs but is low on compression, only has about 6hrs on it. mild porting big bore garbs cross drilled intake 14 pedal reeds dry stacked with some kinda tunner i cant remember bobs nose cone high water pick up manual jack plate and its a 2.4 200 also light wieght cowl. needs carpet and seets mounted and what ever motor work, when i had motor built the builder used diamond hone on crome bores and she ate the rings. i was still trying to break it in when i figured out what had happend.
i forgt to add that i will sell less motor also

[Sanger Jet]

Can these be converted to jet?

[dragstr19]

Can these be converted to jet?
yes it would make a very nice jet thats what i was thinking befor i desided to move up to the 25 daytona. also the boat on ly wieghs in at 450 bare, i personly scaled while doing the bottom