Winterizing

[Run_em_Hard]

Just wanted to double check. Gen 6 502, how many block plugs are there to pull???

[Riverjet502]

There are (2), one on each side of the block, located just above the oil pan rail kinda sorta in the middle of the block.......

[rrrr]

Stock exhaust? One more under each manifold center outlet. You also need to pull the outlet hose from the raw water pump and drain it. The hose runs through the power steering cooler located under the oil pan and through the oil cooler mounted on the port front of the enjum.

[Jbb]

Forget the plugs...leave em in.......build one of these (http://www.riverratlife.com/forum/showthread.php?t=8033) ...and pump it full of corrosion resisting anti freeze!

[Run_em_Hard]

I just wanted to make sure that I got them all on the block..sounds like I did. I took all of them off the IMCO exhaust. I also took off the hose from the oil cooler and the inlet water pump hose.

[Run_em_Hard]

Forget the plugs...leave em in.......build one of these (http://www.riverratlife.com/forum/showthread.php?t=8033) ...and pump it full of corrosion resisting anti freeze!
Can't see..not a member of that one.

[Jbb]

Can't see..not a member of that one.
Just register there ...and you are in....unless your name is Tom Brown... :p

[Run_em_Hard]

Just register there ...and you are in....unless your name is Tom Brown... :p
Registering on too many more sites and I might not get anything done at work :p :p :p