IMPATIENT 1
11-19-2006, 12:11 PM
trw 60 over forged dome closed chamber pistons on resized thumb(dimple) rods with new arp rod bolts. the pistons are supposed to only have @6-7hrs on them, they look pretty new, carb was runnin real rich. 3 of the pistons have a small burr on the sides of the domes. nothing that can't be fixed with alittle deburring of the dome(which i always have to do to new trw's anyways).the rings on the pistons haven't even had time to seat yet, could be reused if someone's building a budget spare mill. i'll take 250.00 plus shipping for the piston/rods. it wouldn't bother me at all to deburr them, slap in into a block and spray a 150hp shot on them, i'm 100% confident they're in good usuable shape.
i've also got a fairly new solid roller cam to sale, the dist gear part is in great shape, nice cam, just to small for a blower.here's the specs on it:
Brand: COMP Cams
Product Line: COMP Cams Magnum Solid Roller Camshafts
Cam Style: Mechanical roller tappet
Basic Operating RPM Range: 2,200-6,500 RPM
Intake Duration at 050 inch Lift: 246
Exhaust Duration at 050 inch Lift: 246
Duration at 050 inch Lift: 246 int./246 exh.
Advertised Intake Duration: 288
Advertised Exhaust Duration: 288
Advertised Duration: 288 int./288 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.622 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.622 in.
Valve Lift with Factory Rocker Arm Ratio: 0.622 int./0.622 exh. lift
Lobe Separation (degrees): 110
Intake Valve Lash: 0.020 in.
Exhaust Valve Lash: 0.020 in.
Computer Controlled Compatible: No
Grind Number: CB 288A-R10
Quantity: Sold individually.
Notes: Requires thrust button and wear plate.
Camshaft, Solid Roller Tappet, Advertised Duration 288/288, Lift .622/.622, Chevy, Big Block, Each
i'll take 160.00 including shipping on this cam, it ran real good in my tx-19, real torquey!
also have a 30/30 cast bbc crank that's freshly machined, be expensive to ship though.
te_1051@hotmail.com for pics
i've also got a fairly new solid roller cam to sale, the dist gear part is in great shape, nice cam, just to small for a blower.here's the specs on it:
Brand: COMP Cams
Product Line: COMP Cams Magnum Solid Roller Camshafts
Cam Style: Mechanical roller tappet
Basic Operating RPM Range: 2,200-6,500 RPM
Intake Duration at 050 inch Lift: 246
Exhaust Duration at 050 inch Lift: 246
Duration at 050 inch Lift: 246 int./246 exh.
Advertised Intake Duration: 288
Advertised Exhaust Duration: 288
Advertised Duration: 288 int./288 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.622 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.622 in.
Valve Lift with Factory Rocker Arm Ratio: 0.622 int./0.622 exh. lift
Lobe Separation (degrees): 110
Intake Valve Lash: 0.020 in.
Exhaust Valve Lash: 0.020 in.
Computer Controlled Compatible: No
Grind Number: CB 288A-R10
Quantity: Sold individually.
Notes: Requires thrust button and wear plate.
Camshaft, Solid Roller Tappet, Advertised Duration 288/288, Lift .622/.622, Chevy, Big Block, Each
i'll take 160.00 including shipping on this cam, it ran real good in my tx-19, real torquey!
also have a 30/30 cast bbc crank that's freshly machined, be expensive to ship though.
te_1051@hotmail.com for pics