View Full Version : Scoop Mount
Taylorman
12-13-2006, 12:34 PM
Anyone use on of these scoop tray mounts with a Dominator carb. Any pictures would be great. Post pics if you have them.
Thanks
http://static.summitracing.com/global/images/prod/large/csi-690_w.jpg
RCB19
12-13-2006, 10:15 PM
I believe Cyclone uses one on his new motor.
Wicked Performance Boats
12-14-2006, 09:35 AM
i've never used one BUT how would you get it off if you needed too, in an emergency? I've alway mounted mine firmly but able to remove instantly if a backfire or gas leak occurs. Budlight
79centurion
12-14-2006, 12:45 PM
The scoop plate hard mounts to that, but most people use pins to hold the scoop onto the plate so you can remove it quickly.
LGCDEVIL
12-14-2006, 09:08 PM
The scoop plate hard mounts to that, but most people use pins to hold the scoop onto the plate so you can remove it quickly.
Dzus fasteners work good.
Bobbo541
12-17-2006, 10:23 AM
Taylorman what is it you need to know ive used plates like that on my set up and they work good.
Slow Burn
12-17-2006, 11:04 AM
If you can see from this image, the tray is mounted solid, while the scoop is held with Dzus fasteners. Clean looking and quick to remove if needed. Hope this helps.
http://www.***boat.com/image_center/data/500/3656wayne_002-med.jpg
Taylorman
12-18-2006, 08:54 AM
Got all my parts to do what i was trying to accomplish. I wanted a way to make my scoop stop turning. I bought a CSR scoop tray mount and drill my dooley scoop.
http://i22.photobucket.com/albums/b334/vidrinek/Boat/DCP_6678.jpg
http://i22.photobucket.com/albums/b334/vidrinek/Boat/DCP_6680.jpg
taylormanss
12-19-2006, 02:20 PM
great looking kevin!
Taylorman
12-19-2006, 07:07 PM
Thanks Randall. Hows yours?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.