big block turbo components/more

[gottaminute?]

i have a bunch of different turbo set ups from our GN boat that I am looking to sell. Carbed, draw thru and efi setups, center exhaust and p1000 style. intake manifolds both tunnel ram/ intercooler and low profile also a matched set of 4 t-4 turbos, water cooled, upgraded thrust bearings (we started on a quad turbo deal a few years back:hammerhea ). also have a couple holman moody ,dual filter oil coolers, dry sump tanks/brackets . if you look at the pics you will also see some jacuzzi jet parts, an edelbrock aluminum motor mount that uses the cast iron powerglide adapter, an accusump, a pair of hilborn 3 inch(?) butterflies, some brand new jet boat style elbows, a 3 barrel holley and,,,and.... and..
look thru the pictures and see if there is anything that interests you... PM me if you need more info
i am also thinking of selling the complete turbo/ efi package that ran so hard on the gn30 boat including spare turbos (shown in the 1st picture).
I want to build a new boat and started thinking that if i cleared some room and generated some $$ , it would kick start the deal.http://www.hotboatpics.com/pics/data/500/15231gn30_pg_gn30_02-med.jpghttp://www.hotboatpics.com/pics/showphoto.php?photo=46072&size=big&papass=&sort=1&thecat=
http://www.hotboatpics.com/pics/data/500/15231010-med.jpghttp://www.hotboatpics.com/pics/data/500/15231000-med.jpg
http://www.hotboatpics.com/pics/data/500/15231000-med.jpghttp://www.hotboatpics.com/pics/data/500/15231013-med.jpg
http://www.hotboatpics.com/pics/data/500/15231004-med.jpghttp://www.hotboatpics.com/pics/showphoto.php?photo=39587&size=big&papass=&sort=1&thecat=http://www.hotboatpics.com/pics/data/500/15231008-med.jpghttp://www.hotboatpics.com/pics/data/500/15231013-med.jpgthere is a few more shots @ ***boatpics member pathoban. dont see what u need, PM me
pat
added parts are in torrance, ca

[BOOGEYMAN]

how much for one of the oil coolers?

[V-DRIVE VIDEO]

Looks like you're havin a swap meet over there...:)

[bordsmnj]

:d

[Wheeler]

i am also thinking of selling the complete turbo/ efi package that ran so hard on the gn30 boat including spare turbos (shown in the 1st picture).
How much, for the efi set up?
and what part of the country, are you located?

[river redy]

Ttt Happy New Years Pat

[river redy]

bump

[konajet]

how much for the casale parts and mid plate? aaron_perry@dell.com or 512.630.1476

[FOURQ]

how much for the turbo manifold non efi and the olsen cooler

[gottaminute?]

that would be the black manifold standing on end in the first parts picture. $750 with the intercooler cores to fit. FYI it is based on a blower manifold so it is fairly low profile and actually has better throttle response than the T/Ram setups on a draw thru system due to a lot less plenum volume.
parts are in torrance , ca
pat

[gottaminute?]

homan moody dual filter oil cooler..$ 400
pat

[shockwaveharry]

How about the cranks? 4.00" stroke? 2 pc seal? std.? Steel? $?

[river redy]

bump

[Wheeler]

How much, for the efi set up?
and what part of the country, are you located?
Any price on the EFI set up?

[gottaminute?]

The EFI/ turbo set up that ran last on "under pressure" includes
center rise ,individual runner exhaust manifolds, hard anodized , inside and out, powdercoated teal.
custom wedge adapters to mount turbos and wastegates
holset H2-c turbos 2-used , 2 fresh rebuilts.
billet boost tubes w/o-ringed flages to air box.
billet air box.
4 two and 1/2 inch throttle bodies incl linkage and TPS.
2 superchiller intercoolers (missing 1 core as we used it for the blower motor).
powdercoated tunnel ram intake with billet injector mounts.
fuel rails, pulse damners and regulator.
PFM gorilla ECM and injector driver pkg.
wire harness and map/temp senders incl.
MSD ignition.
you will need injectors (we ran 160 lb), fuel pumps( we ran 2 aeromotives) , and a good long block to have a system that works great and looks like no other.
parts are in so.cal.
$ 7500.00 or ???

[gottaminute?]

just figured i would run this thru the wringer again. getting anxious to start my newe project.

[gottaminute?]

not that kind of itch ;) :D
but i need to get the gn30 wet again
look my pics over have more stuff too
pair daytona 19 aluminum fuel tanks
a pair of round 8" x 7-8 ft alum saddle tanks
v-drive timing covers, gear drives
some small block rotators.. pink rods, trw, roller stuff. bowtie heads everything less block (could come up with one)
pat

[gottaminute?]

look at pics
pat