Tom Papp parts auction/donation thread

[cyclone]

I dont know about you guys but for me money is pretty tight right now since christmas just came and went. Tough to donate to anything at the moment but i do realize i have parts i could sell. So i'm starting this thread in an effort to off the spare parts i have and the money will go to Tom's family. I'll have to check the garage and snap some pics but off the top of my head I know i've got:
- a used MSD 6AL ignition box I could part with.
- TWO pairs of Lifeline ballistic shorts, slightly used, size 34. one pair is blue, one pair is black.
anyone want to make an offer on it? highest bidder gets it!

[bruleracer]

I'm in,, Tracee and I would not have the wonderful circle of friends we have, had it not been for Tommy taking the time to introduce us to His.
BRAND NEW, IN THE BOX. Kieth Wilson CNC ported 454R intake manifold.
Fit's standard deck hight BBC and 4500 style carb.
I'll set a reserve price of $200.00, It's a $600.00 manifold. Remember, your cash and my part goes to Tommy.
I'll miss you more than you could have ever known my friend.
Steve Brule'
w-951-685-4767
h-951-817-0955

[BUSBY]

I'm in ...
454 2 bolt block, std bore, $200
454 4 bolt block, std bore, $500
PM me for details

[BrendellaJet]

I've got a set of Chevy 454 rods that I'll sell. Proceeds to Papps family.

[BUSBY]

I've got a set of Chevy 454 rods that I'll sell. Proceeds to Papps family.
steel / aluminum
stock? aftermarket?

[BrendellaJet]

Sorry, they are steel, factory pieces. They have a set of used .060 over pistons hanging on them right now.

[BUSBY]

On Monday when I go to the shop, I am going to come up with quite a few things CHEAP ... I will make a list of good, quality engine parts for ski boats at really low prices to donate to the Papp family.
I have rods, cranks, pans, etc.
These will mostly be stock items, but good items ... just not high performance, mostly ski boat stuff ... so check back.

[78Southwind]

Mike
I was hoping this would catch on. Ask one of the Mods if we can get a sticky in the spam section too.
SPAM: Rewarder Headers for a good cause
--------------------------------------------------------------------------------
Rewarder BBC Twisty Headers with mufflers for a Jet Boat $250
All the proceeds will go to the Tom Papp Memorial Fund
http://www.***boat.com/image_center/data/520/1676Headers_EngineMounts.jpg

[OverKill]

Boy I realy want to help so I have to ask. Does anybody have a fiberglass airscoop for a single carb. mount. I have the standard aluminum one now, and Im looking for a little more BLING.:) :) :) :)

[bruleracer]

Really cool Idea 78, Lets make this BIG!!!
Brule'

[BrendellaJet]

Boy I realy want to help so I have to ask. Does anybody have a fiberglass airscoop for a single carb. mount. I have the standard aluminum one now, and Im looking for a little more BLING.:) :) :) :)
Ive got one, needs work though.

[OverKill]

Ive got one, needs work though.
Sounds good do you have any pics. How much do you want?? and who do I send the money to????

[Moneypitt]

I'm in,, Tracee and I would not have the wonderful circle of friends we have, had it not been for Tommy taking the time to introduce us to His.
BRAND NEW, IN THE BOX. Kieth Wilson CNC ported 454R intake manifold.
Fit's standard deck hight BBC and 4500 style carb.
I'll set a reserve price of $200.00, It's a $600.00 manifold. Remember, your cash and my part goes to Tommy.
I'll miss you more than you could have ever known my friend.
Steve Brule'
w-951-685-4767
h-951-817-0955
I'll bid $300. to start this off...........

[hondajoey]

where can donations be sent to

[Johnwithjm]

where can donations be sent to
There is a thread at the top of the jet section with donation info.

[bruleracer]

moneys the man ,, i got 300-300-300-300- do i here 350-350-350
let me here 350
brule'

[Fasterthebetter]

ok so I dont have parts but I am looking for a new motor project. I've been looking for a 500 ci motor, 555, 565, 572 etc. If anyone wants to sell a block, crank, or parts im willing to buy em. Dart or chevy, im just starting to piece it together for this season comin up. Let me know
-the Guy

[mexrunner]

Ive got two olds motors worth of parts for sale including alum intakes a 10 qt pan and some other good stuff would like 3-400 thanks Adam
(951)323-1899

[Bottle Fed]

I dont know about you guys but for me money is pretty tight right now since christmas just came and went. Tough to donate to anything at the moment but i do realize i have parts i could sell. So i'm starting this thread in an effort to off the spare parts i have and the money will go to Tom's family. I'll have to check the garage and snap some pics but off the top of my head I know i've got:
- a used MSD 6AL ignition box I could part with.
- TWO pairs of Lifeline ballistic shorts, slightly used, size 34. one pair is blue, one pair is black.
anyone want to make an offer on it? highest bidder gets it!
Great idea mike and thanks for all of you working with this idea. There are so many way to make this happen. Thanks again guys.
Jeff

[blue wonder]

I dont know about you guys but for me money is pretty tight right now since christmas just came and went. Tough to donate to anything at the moment but i do realize i have parts i could sell. So i'm starting this thread in an effort to off the spare parts i have and the money will go to Tom's family. I'll have to check the garage and snap some pics but off the top of my head I know i've got:
- a used MSD 6AL ignition box I could part with.
- TWO pairs of Lifeline ballistic shorts, slightly used, size 34. one pair is blue, one pair is black.
anyone want to make an offer on it? highest bidder gets it!
ill start the bidding at $50 for the blue pair.

[cyclone]

i belive the blue pair is sold at 75 bucks to KenF.
the black pair might be sold as well. Herb Riggle, who raced with Tommy, hit me up for them yesterday. i'll let you know how that works out.

[supersoaker509]

I'm in,, Tracee and I would not have the wonderful circle of friends we have, had it not been for Tommy taking the time to introduce us to His.
BRAND NEW, IN THE BOX. Kieth Wilson CNC ported 454R intake manifold.
Fit's standard deck hight BBC and 4500 style carb.
I'll set a reserve price of $200.00, It's a $600.00 manifold. Remember, your cash and my part goes to Tommy.
I'll miss you more than you could have ever known my friend.
Steve Brule'
w-951-685-4767
h-951-817-0955
Have any pics

[Ken F]

i belive the blue pair is sold at 75 bucks to KenF.
Yep, I'm on it at $75. Paypal'd the fund
Thanks Cyclone, I'm goin racing this summer!!!
Ken F

[Moneypitt]

moneys the man ,, i got 300-300-300-300- do i here 350-350-350
let me here 350
brule'
Someone let me know (here or PM) if I win this item and I will make payment by check or visa. I'm not pushing it as that intake should bring more than I bid, but I am ready to make payment if and when required................MP

[78Southwind]

I got a couple PM's about the Rewarder Headers you guys better hurry up and buy them.:D

[mares98]

Have a berkley suction housing I believe to be a j.G. Also have misc fuel pump parts manual & elec holleys sitting around in the garage. Any & all sales will go to the donation cause.

[TRG]

ill start the bidding at $50 for the blue pair.
Tony look at mikes post again, you would'nt have fit into them anyway, it read 34", not 24"!:D
Todd

[blue wonder]

Tony look at mikes post again, you would'nt have fit into them anyway, it read 34", not 24"!:D
Todd
damn that hurt!!!!...just think how bad it was when i wore brads 38's at phoenix!!!

[blue wonder]

i belive the blue pair is sold at 75 bucks to KenF.
the black pair might be sold as well. Herb Riggle, who raced with Tommy, hit me up for them yesterday. i'll let you know how that works out.
10-4 let me know

[Bottle Fed]

damn that hurt!!!!...just think how bad it was when i wore brads 38's at phoenix!!!
too bad brads balls didn't come with em. :-)
sorry tony couldn't resist.

[bigriverdog]

moneys the man ,, i got 300-300-300-300- do i here 350-350-350
let me here 350
brule'
I'll bid $325

[bruleracer]

Just to clarify on the Wilson Intake, it is a #2907 style Edelbrock, cnc'd
by Wilson. Edelbrock lists it as #2807 by Rehr and Morrison, Summit shows
it for 579.00. Again it's new in the Wilson box
Im going to run the auction till 6;00 PM saturday, after Toms service.
Thanks Guys
Steve

[MaryJane Rottenkrotch]

Have a berkley suction housing I believe to be a j.G. Also have misc fuel pump parts manual & elec holleys sitting around in the garage. Any & all sales will go to the donation cause.
How much are you wanting for the suction housing???

[Moneypitt]

Just to clarify on the Wilson Intake, it is a #2907 style Edelbrock, cnc'd
by Wilson. Edelbrock lists it as #2807 by Rehr and Morrison, Summit shows
it for 579.00. Again it's new in the Wilson box
Im going to run the auction till 6;00 PM saturday, after Toms service.
Thanks Guys
Steve
I gotta go find some more money, but, "I'll be back".........MP

[dumbandyoung]

Mike
I was hoping this would catch on. Ask one of the Mods if we can get a sticky in the spam section too.
SPAM: Rewarder Headers for a good cause
--------------------------------------------------------------------------------
Rewarder BBC Twisty Headers with mufflers for a Jet Boat $250
All the proceeds will go to the Tom Papp Memorial Fund
http://www.***boat.com/image_center/data/520/1676Headers_EngineMounts.jpg
how much for the bell housing?

[moneysucker]

I have a set of 2 rims and tires Eagle alloys with low pro's I have no Pix of them yet but will have some next weekend. Best offer. Be good for someone with a single axle trailer. I have more stuff too but will have to go through it all when I get home.

[TRG]

I have a set (4) western style rims for sale with rubber ( RUBBER NO BUENO!) will fit to the traditional ford pattern trailer! Make an offer!
They need to be polished as well!
Todd
626-991-9031

[78CoLe]

got a set off bbf gils ot headers with the water inj hole welded up good shape perfect for the races best offer wins them

[cyclone]

postin' this for Brule because he can't log in right now...he'll take a personal check if need be for the manifold he's sellin.

[disco_charger]

I have a set (4) western style rims for sale with rubber ( RUBBER NO BUENO!) will fit to the traditional ford pattern trailer! Make an offer!
They need to be polished as well!
Todd
626-991-9031
Tizzodd, are those the aluminum ones with the 5 slots?

[OverKill]

Anybody here know what happened to Brendellajet. he has a single carb mount fiberglass airscoop he wanted to part with. However I havent seen him around. Someone please ask him to log in.

[hallettman]

hey' 78cole: you got a picture of them ot's i may be interested thanks.

[bruleracer]

Tryin again,
I,ll take a personal check from anybody here. The money will go directly to Toms family!! I'll pay shipping if your not close enough to pick it up.
Bigriver AHEAD at 325.00... DO I HEAR 350.00... Thanks Guys. Hope to see
you saturday. ALL ARE WELCOME! That from the family.
Brule'

[bigriverdog]

Tryin again,
I,ll take a personal check from anybody here. The money will go directly to Toms family!! I'll pay shipping if your not close enough to pick it up.
Bigriver AHEAD at 325.00... DO I HEAR 350.00... Thanks Guys. Hope to see
you saturday. ALL ARE WELCOME! That from the family.
Brule'
Steve, Bring it Saturday and I'll bring a check.

[TRG]

Tizzodd, are those the aluminum ones with the 5 slots?
Ci'

[mares98]

How much are you wanting for the suction housing???
Sorry for the delay, have had a hard time logging in for the past 3 nights. Suction housing has been sold to Bob Frey.

[81rogers]

Hey riodog you still got those heads? I need a set for a 454 .60 out carburated will those work? whats max lift? had a set of 990 heads that me and tommy were putting together but there at dougans and didn't pay tommy for them before he passed so don't know what to do now:confused:

[edog_103]

Ci'
I think the correct answer would be "yes". You've been living Northern Mexico for too long.

[78Southwind]

Ok guys the headers are sold to Scottys on HB. Scott thanks to Shawn FourQ on HB they will be heading up your way by Sunday.
http://www.hotboatpics.com/pics/data/500/15417Donated_Headers.jpg

[bruleracer]

GONE , BIG RIVER WINS!!!
To let all who could not attend know, it has been an emotional day, uplifting
and heartbroken all at the same time. Dan was amazing at overseeing
Toms memorial service and helping us try to understand, what only God can.
Thanks
Steve Brule'

[BUSBY]

GONE , BIG RIVER WINS!!!
To let all who could not attend know, it has been an emotional day, uplifting
and heartbroken all at the same time. Dan was amazing at overseeing
Toms memorial service and helping us try to understand, what only God can.
Thanks
Steve Brule'
Great to see everyone out today, I know Tommy was smiling seeing everyone out there.
I know everyone kicked in to raise enough money to pay for Tommy's serivces ...
(correct me if I'm wrong Jeff) ... but somewhere in the tune to $5k dollars!
I know Tommy's mother, Marianne, is very appriciative of everyone helping out!
It was so good to see fellow hot boaters reaching out and offering up to help where we all know Tommy would (if he could).
Please continue helping his mother out, there are always unforseen costs that arise in the event of a passing of a loved one.
I know I can say thank you for the family ... they told me today that reading all of your posts has been an honor. To know how Tommy touched everyone here has helped them through this tough time.
Brian

[78CoLe]

hey hallet man ill try my best to post some pics of them in the next couple of days

[BUSBY]

ttt
I'm getting a list of stuff together for donation today. Not just boat stuff, but automotive parts as well.

[Bottle Fed]

Great to see everyone out today, I know Tommy was smiling seeing everyone out there.
I know everyone kicked in to raise enough money to pay for Tommy's serivces ...
(correct me if I'm wrong Jeff) ... but somewhere in the tune to $5k dollars!
I know Tommy's mother, Marianne, is very appriciative of everyone helping out!
It was so good to see fellow hot boaters reaching out and offering up to help where we all know Tommy would (if he could).
Please continue helping his mother out, there are always unforseen costs that arise in the event of a passing of a loved one.
I know I can say thank you for the family ... they told me today that reading all of your posts has been an honor. To know how Tommy touched everyone here has helped them through this tough time.
Brian
What an awesome day it was. It was great to see the support for the family as well as the amount of people that came to say good by to our beloved friend(among many other adjetives) Tom Papp. More great news is that with the sales of stickers, calendars, other related stuff and with the donations that came through me for marianne (Toms mother) we raised over $5000 to help her with the bills that have came about. I applaud all of the contributers and I wish you all could see her face when we handed that to her. It was amazing. I don't know exactly what the amount will be to cover the expenses but I know we have helped alot. Lets keep up the awesome work and once again I and his family thank all of you.
Jeff