View Full Version : PARTS WANTED...Please Post
DansBlown73Nordic
03-02-2003, 09:26 AM
I thought since we have a For Sale section why not a WANTED....
I need a BBC tunnel ram oval or square port.
Also looking for a Timing cover that is chrome or aluminum with the water pump drive.
A good used shaft coupler 1 i.n.
CircleJerk
03-02-2003, 09:33 AM
You trouble maker! Obsurd, no one would want to post here!
Wanted: Nicson or other aluminum timing cover for a BBC, will pay any reasonable price. Also could use a set of 12% gears 12degree.
boatguy222
03-02-2003, 09:37 AM
Dan,
I still have this cav plate set up for the Schiada, Are you interested in that?
[ March 02, 2003, 09:38 AM: Message edited by: boatguy222 ]
Cheyenne 572
03-02-2003, 09:53 AM
I have two tunnelram's for sale both are rectangle port and they fit BBC.Which one do you want?Oh yes they are polished also.One is for Dominator's and the other will take 4150's carb's.
Later
Jim S
Fiat48
03-02-2003, 01:24 PM
I need a dry sump pan for a Big Block Chevy. Also need some 12 degree 35% Gears (I know they are rare). Also need a square type water pickup that goes on the cavitation plate. Could also use a Diest Blower restraint (certifiable) for a 6/71. :)
DansBlown73Nordic
03-02-2003, 02:41 PM
BoatGuy222 I thought you had sold the plate parts. As of now Im knee deep in this Nordic project.
GofastRacer
03-02-2003, 02:42 PM
Ok, I'm looking for a needle in a hay stack here!. Anybody know where I can get a set of these stacks?(seems like nobody makes them anymore), actually, just the tops would be even better, that way I can make em the lengh I want!..Thanks...
http://www.***boat.net/image_center/data/500/12Image009.jpg
stump
03-02-2003, 02:54 PM
www.hilborninjection.com (http://www.hilborninjection.com)
[ March 02, 2003, 02:59 PM: Message edited by: stump ]
FlatRat
03-02-2003, 03:54 PM
Looking for a L.H.1" bore 12"x15" or 11 1/2"x15" two blade prop.Thanks.
Dan, I have a tunnel ram for bbc that is rect. port that I don`t need and its only got less than an hour running time on it. RCM
boatguy222
03-02-2003, 04:58 PM
Dans66Stevens:
BoatGuy222 I thought you had sold the plate parts. As of now Im knee deep in this Nordic project. Dan,
Same old sad story, boat parts or christmas.
they are still here, keep it in mind when your ready to do something.
Thanks
Marc
boatguy222
03-02-2003, 05:03 PM
GofastRacer:
Ok, I'm looking for a needle in a hay stack here!. Anybody know where I can get a set of these stacks?(seems like nobody makes them anymore), actually, just the tops would be even better, that way I can make em the lengh I want!..Thanks...
http://www.***boat.net/image_center/data/500/12Image009.jpg GFR,
why didn't say some thing a year old :D I GAVE a set away, Do you need a full set? I might one or two spares left from when I ran Crower, otherwise it's Ron's or Kinsler, OUCH :rolleyes:
VD CRUISER
03-02-2003, 06:36 PM
Boatguy, What cavitation plate parts do you have?
GofastRacer
03-02-2003, 07:37 PM
boatguy222:
GofastRacer:
Ok, I'm looking for a needle in a hay stack here!. Anybody know where I can get a set of these stacks?(seems like nobody makes them anymore), actually, just the tops would be even better, that way I can make em the lengh I want!..Thanks...
http://www.***boat.net/image_center/data/500/12Image009.jpg GFR,
why didn't say some thing a year old :D I GAVE a set away, Do you need a full set? I might one or two spares left from when I ran Crower, otherwise it's Ron's or Kinsler, OUCH :rolleyes: WTF, you gave a set away? :mad: :mad: . I just picked up a set of Crowers and it has 1 piece stacks cut down to the bell's and that ain't worth shit!. I talked to Kinsler, they don't make the tops anymore, Ron's only have the one piece stacks, BTW, Ron has one set of Crowers left and he ain't making anymore, guess Kinsler overrides!!. Contacked Fowler and Lowe's and they don't make em either! :mad: What a bummer!!.. :rolleyes:
GofastRacer
03-03-2003, 05:31 AM
stump:
www.hilborninjection.com (http://www.hilborninjection.com) Thanks stump, but they only have the one piece stacks. I may end up going that route though!. :mad: :confused:
e-ticket
03-03-2003, 05:31 AM
Exchange 12 deg casale v-drive for 10 degree v-drive.
smile_sp
Gofastracer, you have PM sleeping
GofastRacer
03-03-2003, 05:41 AM
e-ticket:
Exchange 12 deg casale v-drive for 10 degree v-drive.
smile_sp
Gofastracer, you have PM sleeping Got it, back at ya!.. :)
beaverfab
03-03-2003, 06:59 AM
Need a 5 to 8 gal. t tank ... j.j.
boatguy222
03-06-2003, 04:18 AM
Looking for a Mike Kuhl waterpump, anybody got one they are not using???
ACCEPTENCE
03-06-2003, 08:39 AM
beaverfab:
Need a 5 to 8 gal. t tank ... j.j. I think I saw one at www.RacingJunk.com (http://www.RacingJunk.com)
Check it out...
78Eliminator
03-06-2003, 10:13 AM
For sale:
Holley rect port tunnel ram setup with or without carbs:
http://www.tpcracing.com/images_temp/DSC00002.jpg
Wanted:
8/71 blower snout
Jordy
03-06-2003, 10:17 AM
Hey J, that's a jet boat tunnel ram, it won't work on a V-drive. wink :D
78Eliminator
03-06-2003, 10:22 AM
jordanpaulk:
Hey J, that's a jet boat tunnel ram, it won't work on a V-drive. wink :D That's the whole selling point. Since it takes so much more HP to push a jet boat, this setup will make a v-drive SCREAM! You see, I have to blow my 19' daytona just to get it to do 40 MPH.
Liberator TJ1984
03-06-2003, 10:47 AM
Wanted : Blower Restraints for Weiand 8/71 BBC no intercooler ( uncertified OK )and all hardware
Wanted : Complete aluminium rear wing assy. w/ all brackets and hardware ( for Mandella Flat )
Wanted : Dual Dominator 4500ser.Scoop 8-3/4" C to Center
Thanks , Gopherrr
Don't feel bad Justin ever since I took off the T-ram and put on the blower my boat slowed down too wink
Bad Meds
03-06-2003, 11:51 AM
LIBERATOR TJ1984 you might want to check out dragboats.com Here's the ad
Boat and trailer sold. Dan Olson Wing for Flat bottom. $700. 1978 Sanger v-drive mini-daycruiser 21' $8900
Brian Pinckney can be contact at:
bpinck@earthlink.net
707 287-3000
BOATGUY 222. I have a friend with a MIKE KUHL pump in great shape that he might sell.How much is one worth to you and I will ask him if he wants to sell.
stix818
03-06-2003, 12:54 PM
Looking for 10 deg casale 15s.
beaverfab
03-07-2003, 06:08 AM
Acceptence thanks for the info,nice site. j.j. smile_sp
[ March 07, 2003, 06:09 AM: Message edited by: beaverfab ]
Beautiful Noise
03-07-2003, 07:57 AM
Stix818:
Looking for 10 deg casale 15s. Stix818,Check with Superdave I just picked up a Set from him and he had 1 set left :)
Steve
stix818
03-07-2003, 12:35 PM
I sent a PM and I think he wants a trade. I only have another set which are 18s and I can't really get rid of them. I'll try him again thanks, Vince
superdave013
03-07-2003, 01:34 PM
Stix818:
I sent a PM and I think he wants a trade. I only have another set which are 18s and I can't really get rid of them. I'll try him again thanks, Vince You missed them, I exchanged them with a guy in Kentucky. He went from 22's to 15. His boat should leave real hard now.
Been getting hit up hard to exchange gears in the last few weeks. I guess everyone's working on their combnations before summer.
dossangers
03-07-2003, 04:57 PM
GofastRacer:
Ok, I'm looking for a needle in a hay stack here!. Anybody know where I can get a set of these stacks?(seems like nobody makes them anymore), actually, just the tops would be even better, that way I can make em the lengh I want!..Thanks...
http://www.***boat.net/image_center/data/500/12Image009.jpg Art get the single piece stacks cut them off and open up the bottoms to make them slide over your adjustable tubes long as you have the correct tulip shape?
scottys
03-07-2003, 06:55 PM
Looking for 10-71.complete or not,I have bird catcher set-up,also prefer intake to fit talldeck.
Thanks Scott
GofastRacer
03-07-2003, 07:15 PM
dossangers:
GofastRacer:
Ok, I'm looking for a needle in a hay stack here!. Anybody know where I can get a set of these stacks?(seems like nobody makes them anymore), actually, just the tops would be even better, that way I can make em the lengh I want!..Thanks...
http://www.***boat.net/image_center/data/500/12Image009.jpg Art get the single piece stacks cut them off and open up the bottoms to make them slide over your adjustable tubes long as you have the correct tulip shape? Thanks Wayne, already thought about that!, the problem with that is at that lenght, they won't fit in a swegging machine!. I'd have to use straight tubing, swedge it and then get the ends tuliped!, now where the f**k do you get that done?, that's why they charge so much for stacks I guess, it's top secret!!.. :mad: :rolleyes:
21rayson
03-07-2003, 10:27 PM
i need 29 gears for a 12 degree split case.
A.SNEED
03-07-2003, 10:36 PM
OK 250 WERE DO YOU WANT THEM SHIPPED
MSD Pro Billet Ready to Run distributor part # 8360 (for BBC). Set of plug wires (no less than 8mm) with straight plug boots for BBC. Swim step brackets for two steps. Gold anodized guage bezels. If anyone has any of this stuff you can email me at byronkoz@msn.com or pm me, thanks.
Flat Nasty
03-10-2003, 08:13 AM
I need a split coupler 1 1/8in to 1 in for my biesemeyer. any used ones out there before I spend $180.00 on a new one? need ASAP
beaverfab
03-10-2003, 08:36 AM
FLAT NASTY Do not have a used one but can fix you up with a new one for 150.00 plus shipping. ck with superdave he just got one. There made from 17-4 stainless heat treated to H1150. j.j. smile_sp smile_sp
[ March 10, 2003, 08:37 AM: Message edited by: beaverfab ]
superdave013
03-10-2003, 08:49 AM
beaverfab:
Do not have a used one but can fix you up with a new one for 150.00 plus shipping. ck with superdave he just got one. There made from 17-4 stainless heat treated to H1150. j.j. smile_sp smile_sp The thing is a pure work of art too. Mines 1/14" to 1 1/8" Until I install it I'll keep it as a center peice on our dinning room table. :rolleyes:
Oh, he balances them too. Seems pretty like a pretty cheep price by the amount of work that had to have went into it.
Flat Nasty
03-10-2003, 09:39 AM
Thanks guys! Superdave, hook me up... $150.00 is the best price I heard of so far.
Thanks,
FN
Beautiful Noise
03-10-2003, 09:46 AM
I've seen SuperDave's Split Coupler,Like he said it's a work of Art :cool: I wish I would have known before I spent $180.00 on mine.
Steve
dossangers
03-10-2003, 09:52 AM
If its that nice im geting one to put on my table!!LOL
Beautiful Noise
03-10-2003, 09:57 AM
dossangers,It will be the LAST Paperweight you will ever Buy also :rolleyes: :D It work's well on Napkin's also :rolleyes:
Steve
[ March 10, 2003, 09:58 AM: Message edited by: Beautiful Noise ]
superdave013
03-10-2003, 10:04 AM
Flat Nasty:
Thanks guys! Superdave, hook me up... $150.00 is the best price I heard of so far.
Thanks,
FN The post above mine is from beverfab. That's JJ and he's the guy that's making them. Send him a PM or an E mail and he'll make it for you.
superV
03-10-2003, 10:04 AM
I need one Detent shift for a turbo 400. Going in a 1981 Day Crusier.
Flat Nasty
03-10-2003, 10:17 AM
beaverfab:
FLAT NASTY Do not have a used one but can fix you up with a new one for 150.00 plus shipping. ck with superdave he just got one. There made from 17-4 stainless heat treated to H1150. j.j. smile_sp smile_sp hey J.J. what are the odds of me getting it by Friday? I live in Phoenix at 85032 zip. how much for shipping?
I can send check money order or credit over phone. let me know ASAP.
beaverfab
03-10-2003, 10:48 AM
Flat Nasty just sent you e mail. Think I can help. smile_sp smile_sp
grimreaper
03-11-2003, 12:49 PM
WHO has some Mopar stuff? 1" bore props 11-12" - (nothing trix-JUST for a cruiser). Cav plate for a Stevens.
CircleJerk
03-11-2003, 01:48 PM
Help, Does anyone have a 6 bolt 1 inch to 1 inch shaft coupler in good used condition. Blondie has a stripped bolt. If not I'll have to order one. JeRk
CircleJerk
03-11-2003, 01:48 PM
Help, Does anyone have a 6 bolt 1 inch to 1 inch shaft coupler in good used condition. Blondie has a stripped bolt. If not I'll have to order one. JeRk
Need a up-down pedal assembly with lock out handle, for a friend's v-drive. hud1@pacbell.net
Flat Nasty
03-12-2003, 07:42 AM
CircleJerk:
Help, Does anyone have a 6 bolt 1 inch to 1 inch shaft coupler in good used condition. Blondie has a stripped bolt. If not I'll have to order one. JeRk pm jj. (beaverfab) picking up a new one for $150.00 + shipping. They are very hard to find good used ones that is.
DansBlown73Nordic
03-12-2003, 03:47 PM
I need a used pair of Mufflers to fit water injected Bassetts.
21rayson
03-12-2003, 06:57 PM
ok i need a 14 quart oil pan for a v-drive.
beaverfab
03-13-2003, 04:02 AM
Circlejerk I found one in the bottom of the old spair parts box look's nasty but it is cheep. Was chrome at one time if you want it I take 20.00 and a circle video. j.j. smile_sp smile_sp smile_sp
[ March 13, 2003, 04:05 AM: Message edited by: beaverfab ]
CircleJerk
03-13-2003, 11:39 AM
Thanks F.N. and J.J. I am investigating aluminum new ones and see Rex has a special on. What do you think about billet aluminum? J.J. I thought you have a video already, is the used coupler a 6 or 4 inch? I should send you a tape for the PR of it all!JeRkintheshop
Snowboat
03-13-2003, 12:02 PM
I'm looking for a remote oil filter setup, for a BBC, that can be used with an Olson, block mounted cooler.
beaverfab
03-13-2003, 12:07 PM
Jerk it is a 4" There is one on e bay under v drive for 60.00 i think. no I have not ordered one of your vedio yet. Have you put a prop shaft release in the bomber boat ? smile_sp
[ March 13, 2003, 12:09 PM: Message edited by: beaverfab ]
Flat Nasty
03-13-2003, 12:48 PM
CircleJerk:
Thanks F.N. and J.J. I am investigating aluminum new ones and see Rex has a special on. What do you think about billet aluminum? J.J. I thought you have a video already, is the used coupler a 6 or 4 inch? I should send you a tape for the PR of it all!JeRkintheshop I spoke to Bergeron eng. in Mesa. He said they use them on Super Stocks and drag boats unde 800H.P. and they work very well. Was going that direction if we could't get on by this weekend.
e-ticket
03-13-2003, 11:03 PM
Looking for oval port intake manifold for BBc.
[ March 13, 2003, 11:03 PM: Message edited by: e-ticket ]
e-ticket, there is a oval port tunnel ram with 650,s for sale in the Recycler .com. The # is 760-244-2478, Hesperia Ca.
e-ticket the price on that was $300.00 obo. UPS idea
e-ticket
03-16-2003, 04:20 AM
Hud, Thanks for the info.
I think it is too much for my stock 454. I was hoping someone might have an oval port performer 2.0 laying around they may want to get rid of. Engine is ready to put in the Barron.
e-ticket, check www.recycler.com (http://www.recycler.com) under auto parts. There is a brand new one there for 25.00, I think that was the price.
blowngas
05-11-2003, 07:46 PM
I have a one race used Dooley made V-Drive 10 qt steel oil pan made for a gen 5 or gen 6 Big Block Chevy---Pan is and looks brand new---no dings or repairs---motor was taken out of a jet boat and ran in a hydro for one race and back in the jet---comes with oil pump pickup for that pan----Paid $550---will take $450---If you buy a new late model crate motor for your V-drive boat, then you need this pan--
Sangerboy
05-11-2003, 08:00 PM
I'm looking for a Dominator top for a Weiand tunnel ram. (Would like to dump the adapters)
ACCEPTENCE
05-12-2003, 06:08 AM
Sangerboy:
I'm looking for a Dominator top for a Weiand tunnel ram. (Would like to dump the adapters) SB, I have a BBC square port high rise complete with dominator top over here. Newly glass beaded for cleaning but not polished. Give me a buzz, Greg
BILLY.B
05-12-2003, 06:15 AM
Chiefy , up again before 8.00am, your killing me. :D :D
ACCEPTENCE
05-12-2003, 07:10 AM
BILLY.B:
Chiefy , up again before 8.00am, your killing me. :D :D Crazy huh??? I spoke with the executive of the trust estate and she said no more money till next week, "GET A JOB" she says, harsh way harsh I tell ya...
Whats a guy gonna do????
Now...seems to me the best course of action is to relax and watch cartoons till next week.
I'm killin you, she's killin me!!!!!
Sangerboy
05-13-2003, 05:43 AM
ACCEPTENCE:
SB, I have a BBC square port high rise complete with dominator top over here. Newly glass beaded for cleaning but not polished. Give me a buzz, Greg [/b][/QUOTE]
acceptance check your pm's
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.