Dyno Results!!!

[BrendellaJet]

Wow, I have to say that watching my motor get dynoed was probably the most awesome thing I have ever seen.
Before I tell you about the power though- I think a huge thanks to Dave Ebbert is in order. This project has taken 3 years, and Dave was always willing to take my call & answer my questions. He knew I had a budget and he helped me out by finding deals on the block & rods and bro'd me out on some other stuff I'm sure(hint!). This man can build a motor.
Also a special thanks goes out to Steve Brule of Westech for putting this motor through its paces. I was there for 8 or 10 pulls and he wrung it out every time-and it never skipped a beat. When I got there they fired it up and when he let her rip I was dumbfounded at how badass it sounded.
The results:
Peak power:825 hp @ 6800
Peak Torque708lb/ft @5300
The best part is that it makes 800 @ 6100 so there isn't much to gain by spinning it 700 more rpm.
http://www.youtube.com/watch?v=sEN2SJvqoRY

[IMPATIENT 1]

sweet! i lurked tonite waiting for results, get any video?

[IMPATIENT 1]

just seen vid comment,lol. that's strong , i'm trying to get 800 with a blower and dual 750's, doin it "all motor" is sick:devil:

[MikeF]

Wow, I have to say that watching my motor get dynoed was probably the most awesome thing I have ever seen.
It is quite fun being there! Day in, day out, those guys do their job well.
Engines gonna make one quick skinny boat! :D

[BrendellaJet]

It is quite fun being there! Day in, day out, those guys do their job well.
Engines gonna make one quick skinny boat! :D
They do. They know their chit too. I think we were all a little bummed when it wouldn't break 820. No matter what they did for 3 or 4 pulls it kept pulling 816. Pulled a quart of oil out of it and bingo! 825.
The boat is skinny. I dont realize it because its the only boat ive really had anything to do with in the last 4 years. Im sure I'll eventually make the move to somthing a little bigger, but for now Im gonna see what this thing is made of!

[Fiat48]

Note to self. Qt oil is worth 9 Hp. So...2 qts is 18 hp. and 3 is...

[Blown 472]

Wow, I have to say that watching my motor get dynoed was probably the most awesome thing I have ever seen.
Before I tell you about the power though- I think a huge thanks to Dave Ebbert is in order. This project has taken 3 years, and Dave was always willing to take my call & answer my questions. He knew I had a budget and he helped me out by finding deals on the block & rods and bro'd me out on some other stuff I'm sure(hint!). This man can build a motor.
Also a special thanks goes out to Steve Brule of Westech for putting this motor through its paces. I was there for 8 or 10 pulls and he wrung it out every time-and it never skipped a beat. When I got there they fired it up and when he let her rip I was dumbfounded at how badass it sounded.
The results:
Peak power:825 hp @ 6800
Peak Torque708lb/ft @5300
The best part is that it makes 800 @ 6100 so there isn't much to gain by spinning it 700 more rpm.
I cant find my firewire so the video will have to wait!
Well lets hear the details of this motta

[Wet Dream]

Note to self. Qt oil is worth 9 Hp. So...2 qts is 18 hp. and 3 is...
Thats funny :D

[Bow Tie Omega]

Well lets hear the details of this motta
Blown, you would not like this motor, it has a "conservative" setup.:D

[Beer-30]

Well lets hear the details of this motta
Chevrolet 548. Compression is pump gas friendly, but would be considered pushing the limits by some(Lets say 10.5:1 for conversation sake). Heads are Canfield CNC 330's with crane cams shaft rockers. Edelbrock Victor Junior ported at Wilson Manifolds. Holley HP 950, Basset Headers, MSD Digital 6 plus ignition & pro billet distributor. Solid roller with .700 lift, Olsen pan. Going with Pete Jackson noisy gear drive because I love the sound.

[BrendellaJet]

Chevrolet 548. Compression is pump gas friendly, but would be considered pushing the limits by some(Lets say 10.5:1 for conversation sake). Heads are Canfield CNC 330's with crane cams shaft rockers. Edelbrock Victor Junior ported at Wilson Manifolds. Holley HP 950, Basset Headers, MSD Digital 6 plus ignition & pro billet distributor. Solid roller with .700 lift, Olsen pan. Going with Pete Jackson noisy gear drive because I love the sound.
Cant even hear the gear drive!

[BrendellaJet]

Here is one pull.
http://www.youtube.com/watch?v=sEN2SJvqoRY

[Carnivalride]

Congrats, nice numbers and very cool sounding engine video!!!! :2purples: :cool: :cool:

[v-drive]

Very nice....:D :coffeycup v-drive

[GofastRacer]

Nice!..:cool:

[Ryan00TJ]

I love the sound of BBC in the morning! Enjoy.

[Bow Tie Omega]

Bri, congrats little bro on the near completion of your new motor and boat. You have put out alot of blood, money, sweat and tears into this addiction we have. It has been really cool to have been able to see what it was, to what you wanted it to be and now the actual fruition of what you wanted. Congrats man...Joe

[Blown 472]

Blown, you would not like this motor, it has a "conservative" setup.:D
That is funny.:eek:

[v-drive]

When I bought my computer(Dell) i got a really nice sound system.
This video is shaking the pictures on the walls...:D :coffeycup :coffeycup
v-drive

[396_WAYS_TO_SPIT]

Here is my exact quote from the other thread;)
Being that dave is building it Im going to say 865hp. Im building a similar motor but Im going with 13.5-1 compression. I would like to see your results as well just to get an idea:)
Good job Brendella;) I knew you were going to be happy with Dave's work. he is a great guy and knows his schit;)

[Infomaniac]

Congrats man. :D

[RiverRacer]

Well, I said 828. That's pretty close. Guess I should go back to street racing!!!!!!!!!! RR

[Fiat48]

Missed it by less than a qt.

[BrendellaJet]

more than one wise crack per thread is begging for an asswhoopin old man.:D

[Fiat48]

It's all in fun! Besides....I just might drop oil out instead of changing blower pulleys. :D

[BrendellaJet]

it only works if you do it on the dyno!!!:D

[Fiat48]

Dang! Back to the 9/16".

[396_WAYS_TO_SPIT]

more than one wise crack per thread is begging for an asswhoopin old man.:D
Now,Now leave the old guys alone :D :D

[cstraub]

Nice piece, excellent power numbers.

[moparjet]

Nice Motor...that Thing Should Push That Jacuzzi.....now Go Woop Up On Some Berks

[v-drive]

I like watching this so it gets a Sunday morning bump...v-drive:D