Bearing Grease??

[707dog]

Whats The Best Wheel Bearing Grease To Buy For My Boat Trailer?? I Got Disc Breaks On Both Axles...thanx!

[396_WAYS_TO_SPIT]

Morey's red grease is shiznit!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[RitcheyRch]

Never heard of Morey's Red Grease. Have always used the blue marine grease.
Morey's red grease is shiznit!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[Rexone]

Neo Synthetic Red Grease. I have it but it's not online yet.
The blue stuff cakes up after awhile and stops lubricating after mixing with water. Used to use it. Went through alot of bearings with it. Switched to Neo. No more drama.

[396_WAYS_TO_SPIT]

NICE pic Rexie:D I didnt even notice the santa until now:D

[RitcheyRch]

Thanks for the info.
Neo Synthetic Red Grease. I have it but it's not online yet.
The blue stuff cakes up after awhile and stops lubricating after mixing with water. Used to use it. Went through alot of bearings with it. Switched to Neo. No more drama.

[707dog]

Neo Synthetic Red Grease. I have it but it's not online yet.
The blue stuff cakes up after awhile and stops lubricating after mixing with water. Used to use it. Went through alot of bearings with it. Switched to Neo. No more drama.
yeah thats what the blue stuff is doin now so i was gonna pull all the hubs get rid of the old grease and give it some fresh stuff cause i plan on taking the boat on some road trips this year and thats the last thing i want happining while traveling with the kids..where can i get that NEO stuff from?? pm me if its a special location...lmao

[707dog]

hey is that stuff called neo z-12 sythetic grease???

[Rexone]

hey is that stuff called neo z-12 sythetic grease???
Yes that's it. Sent you a PM.
I've used this stuff now for the better part of a decade on all my vehicle wheel bearings, trailers, shaft logs, jet pumps... I've really had good luck with it. I don't recall replacing a wheel bearing on any vehicle since I switched to it. I used to change them with regularity.

[lilrick]

Yes that's it. Sent you a PM.
I've used this stuff now for the better part of a decade on all my vehicle wheel bearings, trailers, shaft logs, jet pumps... I've really had good luck with it. I don't recall replacing a wheel bearing on any vehicle since I switched to it. I used to change them with regularity.
cool. Can I just start pumpin' this new stuff in, or do I have to pull everything apart and clean the ol' junk out?

[396_WAYS_TO_SPIT]

Pump it until you see all new stuff;)

[GofastRacer]

You "NEVER" mix greases, take it apart and wash it out and apply the new grease!..

[Moneypitt]

cool. Can I just start pumpin' this new stuff in, or do I have to pull everything apart and clean the ol' junk out?
Seems you have the bench racer terms all down, but is this some kind of code you're using over here?........

[Rexone]

You "NEVER" mix greases, take it apart and wash it out and apply the new grease!..
I agree 100% with Art. Take it apart and get all the old stuff out. Not good to mix grease types.

[396_WAYS_TO_SPIT]

just like mixing oils......Never do it

[SmokinLowriderSS]

You "NEVER" mix greases, take it apart and wash it out and apply the new grease!..
Yes, sometimes 2 different types of grease are compatible and will get along, sometimes not. Just like women. :D
Don't chance it, you don't want the headaches.

[707dog]

Ordered My Grease Today Thanx Rexone!! Thanx Everybody Else Too!!

[Schiada76]

Mike, does this come in a spulge tube that'll fit in a grease gun for bearing Buddies?

[Rexone]

I have it only in standard cartridges...

[Ryan00TJ]

Is a special type of grease needed with Drum brakes? I've always used Merc 24C in my bearing buddies as I always have alot of it around. No problems to date and everything is original save for the shoes. I remember hearing a different grease was needed when you have discs?

[Schiada76]

I have it only in standard cartridges...
I just tried to look it up in my new catlog but couldn't find it, hell I can't find anything in my new catalog, I can't even find my new catalog as a matter of fact.:( :eek: :D
Are they the cartridges for the hand held spluge gun?

[Rexone]

I just tried to look it up in my new catlog but couldn't find it, hell I can't find anything in my new catalog, I can't even find my new catalog as a matter of fact.:( :eek: :D
Are they the cartridges for the hand held spluge gun?
Ok I'm new here.. :redface: a spluge gun sounds like something Tom Brown would keep in his dresser. Never heard the term.
When I refer to standard grease cartridge they're about 2" dia and about a foot long. Grease gun typically has a lever on the side, you slide the cartridge in and pump away. (Bench racer additions not necessary) :)
http://www.***boat.com/forums/attachment.php?attachmentid=22285&stc=1&d=1169174561

[Schiada76]

Oh yeah that's the ticket! Spluge tubes!
Spluge BTW a euphemism for anything that BLORTS out of a tube. Including cocking.:D
IE: Tom Brown on a friday night, online, would most likely be engaged in a spluging moment.

[VDRIVERACING]

I think the word you had in mind is caulking... Oh, that was a joke.... Totally missed it.

[707dog]

Ok I'm new here.. :redface: a spluge gun sounds like something Tom Brown would keep in his dresser. Never heard the term.
When I refer to standard grease cartridge they're about 2" dia and about a foot long. Grease gun typically has a lever on the side, you slide the cartridge in and pump away. (Bench racer additions not necessary) :)
http://www.***boat.com/forums/attachment.php?attachmentid=22285&stc=1&d=1169174561
thanks bro got my order this morning gonna get it done this weekend..thanx again!!