Rooster tail behind bowrider

[Rower4VT]

Anyone have pics of a rooster tail behind a bowrider...like a Baja, Crownline, Larson, etc.? Is it even possible, or are the drive typically mounted too low? I'm probably getting a 20' Larson with the 300hp 5.7 and Alpha drive and was just curious if I'll be able to kick up a rooster tail just for fun, without destroying the drive. Pics?

[jbone]

If you want a roost, get a jet.
J

[Havasu Carrera]

:d

[BDMar]

The only way you will get a rooster tail behind your boat is to trim is way beyond the trim limit. The boat will porpise and be very ill handleing.... even dangerous, then bring it in to us so we can replace the u-joints, gimbal bearing, and possibly the upper gear assy.:D

[riverbound]

Anyone have pics of a rooster tail behind a bowrider...like a Baja, Crownline, Larson, etc.? Is it even possible, or are the drive typically mounted too low? I'm probably getting a 20' Larson with the 300hp 5.7 and Alpha drive and was just curious if I'll be able to kick up a rooster tail just for fun, without destroying the drive. Pics?
like putting spinners on a yugo.

[Tahiti350]

Was looking for the pic's of my Tahiti running at speed, got a little tail going, but nothing spectacular..... I'll keep looking.
Found it, your results may vary.....:D :
http://www.***boat.com/image_center/data/500/2266On_plane.JPG

[dumbandyoung]

Anyone have pics of a rooster tail behind a bowrider...like a Baja, Crownline, Larson, etc.? Is it even possible, or are the drive typically mounted too low? I'm probably getting a 20' Larson with the 300hp 5.7 and Alpha drive and was just curious if I'll be able to kick up a rooster tail just for fun, without destroying the drive. Pics?
Larson??!?! what ..how about you give me 20 bucks then ill kick you in the balls. It would be less painfull:D

[shockwaveharry]

Anyone have pics of a rooster tail behind a bowrider...like a Baja, Crownline, Larson, etc.? Is it even possible, or are the drive typically mounted too low? I'm probably getting a 20' Larson with the 300hp 5.7 and Alpha drive and was just curious if I'll be able to kick up a rooster tail just for fun, without destroying the drive. Pics?
My Shockwave is a "bowrider", 540ci/Bravo1. Click on the video link (http://www.youtube.com/watch?v=VOsSqDIKSlY) to see it! It's no Jet-O-Vator, but I still fit in on the lower river... :D

[Havasu Carrera]

That does not sound or look like a 350 ci Larson!! lol Now I'm Jonesin for a river trip!:D

[Havasu Carrera]

http://www.youtube.com/watch?v=GizL3kvtByA&mode=related&search=
Here is a link to a roost like your describing.

[jbone]

Yep, like spinners on a yugo.
Looks like he's doing about 30 mph.
J

[DMOORE]

http://www.youtube.com/watch?v=GizL3kvtByA&mode=related&search=
Here is a link to a roost like your describing.
The u-joints in that boat must be taking a beating.
BTW a good rooster from a jet is always fun to watch.
Darrell.

[Xlration Marine]

Spinners on a Yugo, thats funny. Yea jbone what you said GET A JET,and a droop with a diverter. Spinners on a yugo:D :D :D :D :D :D :D :sqeyes: