Spectra hardware

[Itsahobby]

Hi all,
I have some hardware from my Spectra I would
like to give away. My boat was in front of my
garage when the garage caught fire ;(.
Anyway, I have fin, strut, front light, some
of the railing hardware, cav turn buckles,
windsheild hold downs and last but not least,
1 Spectra name plate. Just pay the shiping
and put it to good use and it's yours.
I also have a prop, but I would like some $$
for it. It is a Menkens 13 by 16.
Jerry

[corleone17]

What do you want for the Prop$$?

[SPECTRABRENT]

Where do you live, I am interested in your v-drive hardwhere.
Brent
Brentloan@aol.com www.spectramarine.com (http://www.spectramarine.com)
[This message has been edited by SPECTRABRENT (edited June 25, 2002).]

[Itsahobby]

Hi Brent,
I live in San Jose Ca.
Jerry
Originally posted by SPECTRABRENT:
Where do you live, I am interested in your v-drive hardwhere.
Brent
Brentloan@aol.com www.spectramarine.com (http://www.spectramarine.com)
[This message has been edited by SPECTRABRENT (edited June 25, 2002).]

[Itsahobby]

I would like $250 + shiping. I could take
a picture and send it to you if you would
like to see the condition. I had it nickled
and some of the Nickle wore off, but other
than that it only has about 10 hrs. on it.
Jerry
Originally posted by corleone17:
What do you want for the Prop$$?

[SPECTRABRENT]

Yes,
PLease send a picture.
Brentloan@aol.com

[spectratoad]

Itsahobby, If you still have the nameplate I am interested. The guys down at the body shop busted one of mine when they buffed it a couple months ago and any other little hardware stuff you may have I am interested in. I have a 77 Spectra 20'. I am unsure how much shipping is or if you can do COD to my office. Let me know thanks. Todd
P.S. Is the fin for underneath or back around the intake? Wondering if I have one or not.
[This message has been edited by spectratoad (edited June 25, 2002).]

[superdave013]

Sorry to hear about your boat. I'm a slut for old boat hardware so you can always send me the leftovers. I would not mind picking up the turnbuckles and fin/strut and that sort of thing. The name plate would have a much better home with one of the other guys though.
I shot you an e-mail.

[Itsahobby]

test
[This message has been edited by Itsahobby (edited June 28, 2002).]

[Itsahobby]

http://free.***boat.net/gallery/Gearhead_Garage/Other_Equipment/prop.JPG
Originally posted by Itsahobby:
Here is the prop.
[This message has been edited by Itsahobby (edited June 28, 2002).]

[Itsahobby]

Here are the parts I have:
http://free.***boat.net/gallery/Gearhead_Garage/Other_Equipment/parts.JPG
Originally posted by SPECTRABRENT:
Where do you live, I am interested in your v-drive hardwhere.
Brent
Brentloan@aol.com www.spectramarine.com (http://www.spectramarine.com)
[This message has been edited by SPECTRABRENT (edited June 25, 2002).]

[old rigger]

Itsahobby,
Well, seeings how I'm turning my 20 Spectra jet into a v-drive, I'll throw my name in here too. Having just a bare hull with all the holes filled, I still colecting parts. Lots of parts.
More importantly though, sorry to hear about losing your garage and boat in a fire. My mom lost her house about 7 years ago in a fire. Devestating thing to have to go through. She lost everything except what she was wearing. Largest fire in the history of the city of Cypress.
Hope you and your family are OK.
[This message has been edited by old rigger (edited June 29, 2002).]

[superdave013]

It looks like others are in more need then me. Old Rig, that fin would do fine for you.
You might want to go with some stouter 1/2" turnbuckles right off the bat if your starting from scratch.
I't pretty nice of this guy to hook people up like he is. I hope I don't see this stuff for sale at Long Beach!
[This message has been edited by superdave013 (edited June 29, 2002).]

[Itsahobby]

Hi Oldrigger,
Shoot me a email with your address and I'll
find out the shipping cost. Superdave is right
on the turn buckles. That is why I didn't
use them on my new boat, but the fin, strut
and motor mounts should be good. The strut
needs a new bushing.
I was waiting to here from some of the others,
but your need seems to be the highist.
Jerry
Originally posted by old rigger:
Itsahobby,
Well, seeings how I'm turning my 20 Spectra jet into a v-drive, I'll throw my name in here too. Having just a bare hull with all the holes filled, I still colecting parts. Lots of parts.
More importantly though, sorry to hear about losing your garage and boat in a fire. My mom lost her house about 7 years ago in a fire. Devestating thing to have to go through. She lost everything except what she was wearing. Largest fire in the history of the city of Cypress.
Hope you and your family are OK.
[This message has been edited by old rigger (edited June 29, 2002).]

[old rigger]

superdave013,
well you're right about one thing, it's very cool for itsahobby to post this stuff here on the board after his bad luck.
As far as seeing it for sale at the LB swap, it wouldn't be from me, I've never sold there. Just one of the thousasnds every month buy the crap.
After thinking about it, besides the tanks in the boat, the only other thing that I do have is the fin. Your recomendation on the turnbuckles makes sense, and I would like to run a rail kit, so I don't really need the mounts. My goal is to put a wood deck on, so the bow rail stuff should also go to another who needs it. No reason to break up all the parts for just the strut.
itsahobby, thank you anyway for the offer, but I'm going to pass and let someone else benefit from your generosity.

[superdave013]

I could be wrong but those turnbuckles look like the lower pivot is a ball type that's pressed into the bottom pad. Those would be pretty hard to find. If someone has a broken one those would be a golden find for sure.
Old Rig, I by no means was implying that you would sell those parts at the swap. We all know that you mostlikely pack rat stuff just like I do. http://free.***boat.net/ubb/smile.gif
[This message has been edited by superdave013 (edited June 29, 2002).]

[Itsahobby]

Don't worrie about breaking the stuff up.
If you need the strut, it's yours. The bow
rail stuff has already been taken.
Anybody converting a Jet to a vdrive has
got my vote! Just kidding http://free.***boat.net/ubb/wink.gif
Jerry
Originally posted by old rigger:
superdave013,
well you're right about one thing, it's very cool for itsahobby to post this stuff here on the board after his bad luck.
As far as seeing it for sale at the LB swap, it wouldn't be from me, I've never sold there. Just one of the thousasnds every month buy the crap.
After thinking about it, besides the tanks in the boat, the only other thing that I do have is the fin. Your recomendation on the turnbuckles makes sense, and I would like to run a rail kit, so I don't really need the mounts. My goal is to put a wood deck on, so the bow rail stuff should also go to another who needs it. No reason to break up all the parts for just the strut.
itsahobby, thank you anyway for the offer, but I'm going to pass and let someone else benefit from your generosity.

[old rigger]

thanks jerry, you have mail......

[BadBoyzSkiRacer]

i'll take the prop, it will go well on my water ski racer... please contact me
stevepb@bigpond.net.au

[VD CRUISER]

itsahobby, those turnbuckles look like the one's I use. They were made by Nicson way back when. I would be very interested in them. Shoot me an E-mail.

[Itsahobby]

Looks like all I have left is the motor
mounts, lights and windsheild hold downs.
The prop is still forsale.
Jerry
Originally posted by Itsahobby:
Hi all,
I have some hardware from my Spectra I would
like to give away. My boat was in front of my
garage when the garage caught fire ;(.
Anyway, I have fin, strut, front light, some
of the railing hardware, cav turn buckles,
windsheild hold downs and last but not least,
1 Spectra name plate. Just pay the shiping
and put it to good use and it's yours.
I also have a prop, but I would like some $$
for it. It is a Menkens 13 by 16.
Jerry

[21rayson]

what is the shaft 1 1/8 or 1 inch and how much.

[Itsahobby]

It's for a 1 inch shaft. I would like
$250 + ship
Jerry
Originally posted by 21rayson:
what is the shaft 1 1/8 or 1 inch and how much.