motor-->gears-->prop

[RaysonRat]

OKay guys another new guy question. Got my casale apart, now im curious as to the ratio and my prop in conjunction with my motor and if i should be looking for a different ratio before i put it back together numbers on the gears are CE 1.73 38t 1.12 L.H 12 2nd gear 34T 1.12 L.H CE 1.73 12 the prop says NI-AC 12 DYNO CUP 15L WEST COAST MARINE NORTH HIGHLANDS CA 2854 590 What i want to know is this all gonna work with my 468 BBC making 800hp @ 7000 rpms in my 19 oot rayson craft I know this is very vague but anything u can do to enlighten me would be greatly appreciated.

[*NAPALM*]

check your message box.

[V-Drive Tom]

RaysonRat, If you are making that much power you should go up in gear a little.(18%)(1.18)
You will end up with a steel prop to be safe.
It will also out perform the brass one you have by a good amount. Does your engine have a blower?
TOM..

[RaysonRat]

thanks for the advice v drive tom, no the motor is naturally aspirated, if anyone out there has a minute/hour i have a ton of questionsconserning everything about this boat i am very new to this the completely dissasembled boat was my 21st birthday present

[V-Drive Tom]

RaysonRat, Call now,If you want..Tom Bentley
530-885-0531 smile_sp :cool:

[V-Drive Tom]

RaysonRat, Call now,If you want..Tom Bentley
530-885-0531 smile_sp :cool:

[Itsahobby]

I sure could of used a guy like Tom when I was
21. wink
Itsahobby
V-Drive Tom:
RaysonRat, Call now,If you want..Tom Bentley
530-885-0531 smile_sp :cool:
[ July 28, 2003, 09:02 PM: Message edited by: Itsahobby ]

[SUI-CY-COLE]

800 h.p 468 ...???!!!!! damm thats good stuff,you should be building those for a living!!!!!...congrats

[RaysonRat]

okay im still trying to decide if your complementing my engine builder or making fun of me but either way