PDA

View Full Version : Well here goes......



boatsnblondes
01-28-2006, 07:18 PM
I said that I would try to get some shots of the boat up before my trip, so here goes...plus a couple fo other things... :rollside:
First, here is the boat, being worked on at my buddies house, we were rewiring the entire system......

my21advantage
01-28-2006, 07:22 PM
http://www.***boat.net/forums/attachment.php?attachmentid=10851

H20Advantage
01-28-2006, 07:29 PM
Good looking boat. What is it?

76ANTHONY
01-28-2006, 07:29 PM
dam, thats a nice lookin boat. i'd say you got some serious time layed out in that bad boy... nice boat

Quality Time
01-28-2006, 07:39 PM
Good looking boat. What is it?
I would say a Hallett Vector

boatsnblondes
01-28-2006, 07:49 PM
This is the motor....550-600 HP 468 full roller moter....Lightning heads, full msd digital ignition, cam driven water pump, external oil and drive oil cooler, holley 800 carb. Believe it or not, one thing I haved learned, is that no matter how much money you have, or free time to throw at these things, there is always someone out there with more. So, while this is not the fastest boat out there, it's one of them, which is good enough for me....it's a cross between an E ticket ride for me and the boys, and a pull your kid out of the water on skis for the first time gentle puller...

76ANTHONY
01-28-2006, 07:53 PM
http://www2.***boat.com/forums/attachment.php?attachmentid=10852 here ya go..

boatsnblondes
01-28-2006, 08:00 PM
http://www2.***boat.com/forums/attachment.php?attachmentid=10855&stc=1
Full Helm Hydraulic steering, HP 1000 trim tabs, and blue swimsteps, it goes over to the shop when I get back to finish getting rigged....

boatsnblondes
01-28-2006, 08:06 PM
http://www2.***boat.com/forums/attachment.php?attachmentid=10854&stc=1
Gunner, the big one, and Lady Sunshine, or sunny.....both patiently waiting for the boat to get done and the start of the new season.....

76ANTHONY
01-28-2006, 08:08 PM
Gunner, the big one, and Lady Sunshine, or sunny.....both patiently waiting for the boat to get done and the start of the new season.....
http://www2.***boat.com/forums/attachment.php?attachmentid=10854 great lookin pups

boatsnblondes
01-28-2006, 08:12 PM
Sunny said..."No more pics till I get a biscuit!!!"

boatsnblondes
01-28-2006, 08:15 PM
I am getting the hang of this....here's a better motor shot.....

C-2
01-28-2006, 08:25 PM
Hey boats,
I'm about to drop a similar motor in my Hallett 210. I also have the Candy Red lightnings, going with an 850 Demon, fabricated valve covers, probably will go full polish on the Dart intake. Will look similar to yours. Also adding full hyd steering (Marine Machine), and ugraded my tabs to larger twin ram Bennetts.
Your boat looks really nice - did you do the trailer yourself?
http://www.***boat.com/image_center/data/520/1132496-2.jpg

76ANTHONY
01-28-2006, 08:28 PM
http://www2.***boat.com/forums/attachment.php?attachmentid=10858

76ANTHONY
01-28-2006, 08:29 PM
http://www2.***boat.com/forums/attachment.php?attachmentid=10856 COOKIE NOW

76ANTHONY
01-28-2006, 08:31 PM
gotta little red here too.http://www.***boat.com/image_center/data/500/276401010068.jpg

boatsnblondes
01-28-2006, 08:36 PM
C-2, NICE motor....should be real nice in that 210....this one went in a Vector...as for the trailer, I looked around at who was doing the good stuff out there, and decided that what I wanted to do would cost the same as a new one, but not be as good as what I had....this trailer has 6" box steel all the way around, and it trailers like a dream...I pull it with a Yukon XL and you can't even tell it is back there. I sandblasted it down to the bare metal, cut off the old hitch, put on the new one, raised it, it was lowered before and would drag the bottom of the outdrive if I didn't watch out...rebondoed the entire trailer, put 9" stainles fenders on it, and replaced both axles with disk brake axles, then added the side guides a la Schiada, and repainted it fire engine red. I also put LED's all the way around the trailer...people dig the thing...when I had the boat at the shop on a dolly, I pulled it to the shop every once in a while to grease the bearings, and the guys dug it....

boatsnblondes
01-28-2006, 08:56 PM
Nice ride Anthony, I like the red trim around the seats......

76ANTHONY
01-28-2006, 09:17 PM
Nice ride Anthony, I like the red trim around the seats......
THANKS, hahaha the boat used to be pink and purple when i bought it. the seats where the same. looked like a gay mans bass boat. it doesnt have the power yours has but it gets me on the water. that boat and engine are awsome... oh and you better get the pups a cookie quick :D

boatsnblondes
01-28-2006, 09:52 PM
It's just fast enough to get me to the beach before everyone else drinks the beer...but I am getting excited about it....I'm really curious to see how it is going to sound once it is out there.....hopefully pretty good....I bet those Bassett's sound off.....sure are nice....does anyone bug you about them now that those gonads in Sacramento have put in the noise laws????

76ANTHONY
01-28-2006, 10:03 PM
It's just fast enough to get me to the beach before everyone else drinks the beer...but I am getting excited about it....I'm really curious to see how it is going to sound once it is out there.....hopefully pretty good....I bet those Bassett's sound off.....sure are nice....does anyone bug you about them now that those gonads in Sacramento have put in the noise laws????
not yet, but i havent taken her out in 5 months either, so we shall see. f-em if they cant take the noise :crossx: its all show and very slow, but i dont leave the beach much, so im the one drinkin all the beers :D im kidding she'll run all day and i dont drink while i have her out, unless the g/f drives and we are not that far yet :D

76ANTHONY
01-28-2006, 10:05 PM
yeah this bad boy will sound good no matter what you dohttp://www2.***boat.com/forums/attachment.php?attachmentid=10852

H20Advantage
01-28-2006, 10:16 PM
Just click on the insert image button http://www.***boat.com/image_center/data/500/803insertimage.gif and insert your link.
Or use photo properties

Hardly Satisfied
01-29-2006, 03:20 AM
nice boat

Craig
01-29-2006, 10:30 AM
Hey C-2, finally got that thing back together, congrats!!!!

C-2
01-29-2006, 04:15 PM
Hey C-2, finally got that thing back together, congrats!!!!
Hey, it's not in yet!
We'll see if it fits, if I have to cut the hatch......might as well throw something else on top of it?
obnoxious001 from this board built the motor, a Gen IV 496 stroker w/GM alum heads, comp rollers, guesstimating 550hp. I gotta get going on this thing, everything is just around the corner.
What's up with your rocket, anything new to report?