PDA

View Full Version : Holley 9379/9381


hottrodder
03-19-2002, 08:05 AM
I have a Holley 9379 (4150-750) and I'm looking for a 9381 (4150-830). Anyone want to trade?
picklefork1
03-19-2002, 09:28 PM
Hey hottrodder I may be interested give me a call (909) 712-9227, oh and can I have the v-drive movie next???
gnarley
03-20-2002, 04:54 PM
hottrodder, I have a nice 9381 tell me more about your carb.
Gnarley
gnarley
03-20-2002, 05:01 PM
hottrodder, Is it a marine 750? Or if anyone else is looking for an 830 CFM http://www.holley.com/HiOctn/ProdLine/Products/FMS/FMSC/0-9381.html I would like to trade for a marine 830 or 850 possibly.
Gnarley
[This message has been edited by gnarley (edited March 20, 2002).]
Little Wood Boat
03-20-2002, 05:46 PM
got a holley marine 800cfm, P/N 0-9022 anyone interested?
Ed
Fired Up
03-20-2002, 07:34 PM
Originally posted by Little Wood Boat:
got a holley marine 800cfm, P/N 0-9022 anyone interested?
Ed
There are several 800 cfm marine carbs. Does you model have vacuum or mech. secondaries. Double pumper?
Little Wood Boat
03-20-2002, 08:58 PM
Fired up, it's a DP (mech secs) dual feed center inlet fuel bowls with manual choke (it's all there but the choke plate in the airhorn). If you look on Holley's site under marine carbs, the part # is 0-9022.
Ed
gstark
03-20-2002, 09:25 PM
Little Wood Boat:
I am interested in your 9022.
Contact me at my e-mail address.
Little Wood Boat
03-21-2002, 04:25 AM
gstark, e-mailed you last night with more info, let me know what you think...Ed
hottrodder
03-21-2002, 07:31 AM
Gnarley: No. It's not a marine carb. No choke, mech secondaries, double pumper.
http://www.holley.com/HiOctn/ProdLine/Products/FMS/FMSC/0-9379.html
If your interested let me know. I'm interested if you want to trade.
Pickfork1: Check the URL for info. I'll try ringing you a little later in the day.
gnarley
03-21-2002, 09:41 AM
LWB, you still have the 9022? How much you want for it and why are you selling it?
Originally posted by Little Wood Boat:
got a holley marine 800cfm, P/N 0-9022 anyone interested?
Ed
hottrodder, Sorry I don't want a non-marine carb, that is one of the reasons I am looking to trade or sell a real nice 9381, my engine should have a 0-80558 on it. Your 9379 is smaller than I want for a single carb on a blower. IF you want to buy it let me know.
Thanks,
Gnarley
[This message has been edited by gnarley (edited March 21, 2002).]
rivercrazy
03-21-2002, 09:45 AM
That is a good carb. I have one on my boat. Its marine rated from Holley
Originally posted by Little Wood Boat:
got a holley marine 800cfm, P/N 0-9022 anyone interested?
Ed
gnarley
03-21-2002, 09:57 AM
RC, what do you have under your carb?
Gnarley
Originally posted by rivercrazy:
That is a good carb. I have one on my boat. Its marine rated from Holley
rivercrazy
03-21-2002, 10:08 AM
A 1998 marine power 454 mag. 390hp at the crank. I had a 780 Holley single feed vac sec carb on it before. That carb did idle a little better but always ran rich despite many attempts to jet it properly. The best thing about the 9022 was much more out of the hole and mid range accel.
If anyone wants a 780 holley with a polished body, let me know. Its in good shape
Originally posted by gnarley:
RC, what do you have under your carb?
Gnarley
gnarley
03-21-2002, 10:19 AM
RC thanks for the info,
I need some info to help choose the correct replacement for the damn carb on mine. The 9381 is a great carb, I'm just mad that I need to shell out 600 bones for a new one unless I can find a good trade.
Gnarley
Little Wood Boat
03-21-2002, 07:55 PM
gnarly, still have the 0-9022. It was new in oct. '98, last run july '01. it cost $460 then, i'd like $300. for $350 i'll throw in a Weiand STEALTH (bbc oval port) mani., a K&N arrestor, also a nice dual feed fuel line. i'd like to give "gstark" 1st shot at it, ok? (he already called on it and may try to get to me this weekend.) reason for replacing the carb...upgraded everything.