PDA

View Full Version : Re-Rig Pics


Jetaholic
03-05-2007, 10:36 PM
Well...I spent Saturday at ironman44bear's place and got some of my rigging done.
http://www.***boat.com/forums/attachment.php?attachmentid=25699&stc=1&d=1173162936
http://www.***boat.com/forums/attachment.php?attachmentid=25700&stc=1&d=1173162936
http://www.***boat.com/forums/attachment.php?attachmentid=25701&stc=1&d=1173162936
http://www.***boat.com/forums/attachment.php?attachmentid=25702&stc=1&d=1173162936
http://www.***boat.com/forums/attachment.php?attachmentid=25703&stc=1&d=1173162936
Jetaholic
03-05-2007, 10:37 PM
http://www.***boat.com/forums/attachment.php?attachmentid=25704&stc=1&d=1173163038
http://www.***boat.com/forums/attachment.php?attachmentid=25705&stc=1&d=1173163038
http://www.***boat.com/forums/attachment.php?attachmentid=25706&stc=1&d=1173163038
twowheeledfish
03-05-2007, 10:42 PM
This project is coming along nicely. I likey.
e514jet
03-06-2007, 06:47 AM
nice jetholic........E
Jetaholic
03-08-2007, 01:00 PM
Well I'm just about to finish up the under dash wiring. I decided to untie the pre-made harness and add to it the wires to go to the fuse panel and my GPS Speedo wiring as well. Man this shit is a bitch lol.
RitcheyRch
03-08-2007, 04:16 PM
Looking good.
396_WAYS_TO_SPIT
03-08-2007, 04:31 PM
fukkiing sweeeeet!!!!!!!!!!!!!!
Looking good holic;) Keep them pics comming;)
67weimann
03-08-2007, 04:37 PM
Wow, that must be a jet boat model speedo b/c it says you're doing 10 mph with the key off...:D
Jetaholic
03-08-2007, 09:27 PM
Wow, that must be a jet boat model speedo b/c it says you're doing 10 mph with the key off...:D
It's the eBay jet boat signature model...
Jetaholic
03-08-2007, 10:07 PM
Well...I got the pump in the boat today. Now it actually looks like it has a purpose.
One more day of wiring and all the electrical behind the dash should be done. I'm takin' my sweet ass time on it...I'm very meticulous when it comes to building wire harnesses and shit.
Hopefully next week I'll have the motor most of the way completed and installed in the boat.
TahitiTiger
03-09-2007, 10:01 AM
Nice work! I hope that some day my Tahiti will look that nice :D
I like your switches too :) where did you get those? Do they offer em in different colors?
Jetaholic
03-09-2007, 10:20 AM
The switches are just regular marine pull on/push off switches.
The knobs, however, are Hardin Marine...you can get them from CP Performance and I do believe they have a limited number of different colors for them.
Bigern
03-09-2007, 02:39 PM
Well...I got the pump in the boat today. Now it actually looks like it has a purpose.
One more day of wiring and all the electrical behind the dash should be done. I'm takin' my sweet ass time on it...I'm very meticulous when it comes to building wire harnesses and shit.
Hopefully next week I'll have the motor most of the way completed and installed in the boat. i need a new harness , my shit is old, too bad your in norcal, I hate wiring.
Jetaholic
03-09-2007, 06:14 PM
As much of a pain in the ass as it is, I love doing it.
If I was closer to ya I'd do it for ya.