1 carb 1 prop & Header Braces

[Schiada Time]

850 Holley vacuum secondary perfect for big block auto use-$325
10-7/8X15 Menkens SS 3-blade v-drive propeller. clean and in good shape-$300
Header Braces for a 460 BBF-Freshly rechromed and ready for long collector Bassetts- $75.00

[Wrenchforce]

Travis - what are you moving to on the 502 in your 22'? Thinking about going with a tunnel ram/dual carb setup? I'm sending my carbs in this next week to the Carb shop to have rebuild. If they come back to me with a 'start over' option, I'll drop you a line if you still have them.
Good luck.

[Schiada Time]

Wrench- I just swapped the vaccum secondary the 502 comes with for a 4150 style mechanical double pumper. This carb has only ran a few times and is siiting on my workbench awaiting a new owner.
Travis

[Schiada Time]

good parts need a new home. Back to the top!

[Schiada Time]

Back up top. Flexible on prices.

[Schiada Time]

Bump:) :)

[Schiada Time]

850 Holley vaccum secondary-perfect for Big Block Muscle car or hot rod
$300
10-7/8X15 Menkens stainless 3-blade V-drive prop for 1-inch shaft, left hand rotation-$325
chrome header braces for BBF long collector Bassetts-$75
These parts need to go!
Travis

[Schiada Time]

Ready to deal.

[Dominator Scott]

Ready to deal.
Can you post a pic of the header braces. I might be intersted in them.
Or you can email me a pic.
csunsation@yahoo.com
Scott/517-281-1567

[Schiada Time]

I'll shoot pics tonight and e-mail them to ya.
travis

[Dominator Scott]

I'll shoot pics tonight and e-mail them to ya.
travis
No pics yet?:confused:

[Schiada Time]

Sorry man. Got busy with the family last night. I'll shoot them this morning and e-mail them to you from work.
Travis

[Schiada Time]

Dominator Scott- I sent pics to your e-mail. Let me know if you want them.
Travis

[Schiada Time]

Pics of these parts are coming? One of my buds on here is going to put them up. The prop is in good shape and would work well for a smaller cruiser with tall gears. the carb is ideal for Big Block automotive use and the header braces would look cool on a BBF jet boat engine.

[lilrick]

wanna trade some stuff for that prop? I gots parts. :D

[Schiada Time]

Lilrick- i was really looking for cash but what do you have to trade?

[lilrick]

I may have a prop or two you can try .

[Schiada Time]

Lilrick- what do you have? I have a 12x15, a 12x16 and a 11.5X15. If you have something in between 11.5 &12 I guess one more prop for test day can't hurt. I would be willing to trade my Menkens 10-7/8x15 for a clean prop in that range. I have a 1-inch shaft and my set-up is driven off the back so left hand rotation.

[Dominator Scott]

Pics of these parts are coming? One of my buds on here is going to put them up. The prop is in good shape and would work well for a smaller cruiser with tall gears. the carb is ideal for Big Block automotive use and the header braces would look cool on a BBF jet boat engine.
Will they work with Hooker BBF headers pictured here?

[Schiada Time]

DominatorScott- Those look exactly like Bassett long collectors so I do not see why they would not work. Shoot me an e-mail tonight at travis.noack@sbcglobal.net and let me know if you want them. Nice Sanger Super Jet!

[Dominator Scott]

DominatorScott- Those look exactly like Bassett long collectors so I do not see why they would not work. Shoot me an e-mail tonight at travis.noack@sbcglobal.net and let me know if you want them. Nice Sanger Super Jet!
Sending you an email. Thanks for the compliment. I restored the boat for my father last fall and presented it to him for Christmas as my gift to him. He had no clue what I had done and thought I was just gonna store it for him for the winter.
Here is a couple before pics.

[dmontzsta]

Here are the pics:
http://www.dmontzsta.com/MiscStuff/MiscPics/TravisSchiada/TravisParts/Header-Braces-1.jpg
http://www.dmontzsta.com/MiscStuff/MiscPics/TravisSchiada/TravisParts/Header-Braces-2.jpg
http://www.dmontzsta.com/MiscStuff/MiscPics/TravisSchiada/TravisParts/Trav's-carb.jpg
http://www.dmontzsta.com/MiscStuff/MiscPics/TravisSchiada/TravisParts/Trav's-prop-1.jpg

[Dominator Scott]

I like those braces. Do they just bolt to the bell housing and the collars are secured by 4"stainless hose clamps I presume?

[Dominator Scott]

What is the inner diameter of those collars? maybe it just the pic but it looks
like they only about 3" when closed. Or aren't the endes supposed to touch when clamped down?

[Schiada Time]

i believe that is how they were mounted. Been so long since I looked at the back of a BBF. They are ready for you if you want them.

[Schiada Time]

Ends touch when clamped down. They were on my old hallet jet boat motor when I bought the boat approx. 5 years ago now. They are freshly re-chromed and looking good. Where are you located Dominatorscott?

[Dominator Scott]

Ends touch when clamped down. They were on my old hallet jet boat motor when I bought the boat approx. 5 years ago now. They are freshly re-chromed and looking good. Where are you located Dominatorscott?
Lansing Mi. Where are you at?

[Schiada Time]

Orange County, CA. I know you will have to incuur some shipping costs so I am open to a reasonable offer. They are not producing any money sitting in my garage.
Travis

[Dominator Scott]

Orange County, CA. I know you will have to incuur some shipping costs so I am open to a reasonable offer. They are not producing any money sitting in my garage.
Travis
They certainly look nice but seem rather short. Maybe just my imagination considering I am new to the open engine jet boats. If you could measure the length tonight that would be great. (mounting hole to collar base)
I am going to measure from the mounting point on the bell housing to the bottom of the header.
Don't mean to be a pain.:rolleyes:
Feel free to give me a call.
Scott/517-281-1567

[Schiada Time]

I'll measure that for you and post it back up here.
Travis

[Dominator Scott]

I'll measure that for you and post it back up here.
Travis
Cool. I will take a measurement on the engine tonight and compare it tomorrow morning.

[Schiada Time]

16-inches on that measurement. Let me know what you want to do.
Travis

[Dominator Scott]

Does anyone have these monted on their BBF? I measured from collector of the header to the 2 possible mounting points on the bellhousing and got measurements of 17.5" and 19.5".:confused: SchiadaTime is saying 16". I noticed these braces have a 45 degree bend at the mounting tabs and compensated for that. Any ideas?
Could my Hooker headers be bent differently than Bassetts making them taller and my measurements being 1.5" taller than the braces?:jawdrop:

[Schiada Time]

I believe the bend is where your mind starts playing tricks. I had these on my BBF with the Bassetts and they fit and looked great. 16 was without bending the tape at all.
Schiada Time

[Dominator Scott]

I believe the bend is where your mind starts playing tricks. I had these on my BBF with the Bassetts and they fit and looked great. 16 was without bending the tape at all.
Schiada Time
I will recheck my measurements at lunch today.

[Schiada Time]

Let me know. They are sitting on the wrokbench waiting for you.
Travis

[Schiada Time]

Parts need to go. Cash talks!

[Dominator Scott]

Parts need to go. Cash talks!
Just sent ya a PM pal.

[dmontzsta]

bump.
nobody needs a carb for summer? I know someone has a POS carb they are just dying to replace. :)

[Schiada Time]

Come on guys. Need money for honeymoon. Bring on the insulting offers! That carb is a steal, the prop is also a steal. I think the header braces may be sold but no cash yet.
Travis

[Schiada Time]

Is everyone broke?

[Schiada Time]

Back up top

[Schiada Time]

The Header Braces are sold. The carb and prop are still available.

[Schiada Time]

Come on