4 Sale 2001 Mach 26 DCB Open Bow

[Surmike]

Alright here it is 2001 DCB Mach 26 open bow on triple axle Extreme trailer
Left side drive w/ hot foot set up
Hull has 42 original hrs and engine/ drive package has 6 hrs.
Solid built blown 454 w/ a 8-71 blower currently running 5 lbs of boost
Dyno'd at 650 hp as set up w/ this boost
Bravo 1 drive w/ drive shower Gil exhaust, Sea Strainer,
Oil cooler, dual batteries, Billet trim pump, quick release steering wheel,
Matching Bimini, Snap on covers and travel cover all covers are Purple.
These are just a few of the extras included
This is one sharp unit hardly ever seen. I am the 2nd owner
. Considering partial trade for Toyhauler, Fish & Ski Boat, Motorcycle, Etc. Etc.Boat can be seen at Triad Performance Tpmarine.com in Albuquerque. Call 505-264-6138 ask for Mike or e-mail me at Surmike@msn.com Triad Performance can also assist w/ financing if needed
NEW REDUCED PRICE $70k OBO [/COLOR] Need To Sell

[bigq]

Nice! is that the special DCB orange I always hear about...:D
http://www.***boat.com/forums/attachment.php?attachmentid=26280&d=1173754128

[Surmike]

It is but amazingly this one isn't solid orange
Haha:)

[Surmike]

Come on you know you want this one More pics available just email me

[Surmike]

This is open for offers or are DCB's out of style now??

[NOTALENT]

Are you getting towed in, on the 2nd picture???:eek: :D

[Surmike]

Funny huh thats what happens when you run out of gas.
This was the only pic of the dash I had to show.

[copterzach]

Bump for Ya. Sent you a pm

[Surmike]

PM Sent

[Surmike]

Some more pics
The colors are Purple, Grey, and Orange. The carpeting throughout is Grey.
The gauges are white faced w/ Tangelo bezels, and the steering wheel is purple. All other handles etc. are polished aluminum. This boat is as new as you can get when buying used and the hours are correct. It hasn't even been used yet!!!

[ULTRA26 # 1]

I'm not sure about a 650 HP blower motor in 26 Daytona hull with no external steering. Doesn't sound like something Dave would build as there is an obvious saftey issue.
Still, nice boat
John M

[Surmike]

External steering is included as it was removed by the previous owner and is replaced w/ WPM dual rams just not pictured. The pics are from when motor was installed. Sorry for not listing this sooner.

[ULTRA26 # 1]

Any recent pics of the drive? They would probabally help the sale
Just my .02
John M

[tpmarine.com]

This boat is in great condition and anyone that has been by the shop to look at it can vouch for that...:)
If you are interested you can email surmike or myself...this is one of the nicest Mach 26 DCB's that I have seen and everything is in like new condition.
Here are a few more pics that I have taken...:D

[tpmarine.com]

Livorsi Gauges & Livorsi removable hub...trim switch has been set-up with quick disconnects!
http://www.***boat.com/forums/attachment.php?attachmentid=26489&d=1173970288

[tpmarine.com]

http://www.***boat.com/forums/attachment.php?attachmentid=26490&d=1173970336

[tpmarine.com]

GetReal Billet Trim Tank
http://www.***boat.com/forums/attachment.php?attachmentid=26491&d=1173970381

[tpmarine.com]

454 with 8-71 Blower...assembled & dynoed by Statkus Performance Engines...650HP @ 5500rpm...build sheet available.
http://www.***boat.com/forums/attachment.php?attachmentid=26492&d=1173970445

[tpmarine.com]

Any recent pics of the drive? They would probabally help the sale
Just my .02
John M
John, thanks for the suggestion...here you go. :)
http://www.***boat.com/forums/attachment.php?attachmentid=26474&d=1173930423

[Surmike]

:sqeyes: :) :devil:

[Surmike]

This could possibly be the best deal on a DCB in history and someone's gonna miss out.

[tpmarine.com]

OK, the owner would like this boat gone...the season is around the corner and this boat is ready for the lake...:)
$75,000.00
Triad Performance can help with the financing.
The boat is in my shop and for those that are seriously interested, give me a call and I would be happy to discuss the details with you and send you some more pictures of the boat.
505 345-3760

[Surmike]

Back 2 top

[Surmike]

May consider partial $$ & trade for Toyhauler.

[Surmike]

Still open for offers!!!
boat was out Sunday and ran like a dream

[Surmike]

Bump New Price $70,000 just for the warm weather

[Surmike]

Still available
Open to offers and will consider trades especially Toyhaulers, Etc.
:sqeyes: Just need to move this baby!!

[Surmike]

:jawdrop:

[Surmike]

Check out the deal on this!! New price listed and new pics

[Surmike]

;) :mad: :D

[Surmike]

Bump Still available and taking offers

[Surmike]

Bye Me, Bye Me
I wanna go to the lake!!!

[TOBTEK]

http://www.***boat.com/forums/attachment.php?attachmentid=26491&d=1173970381
Just curious did DCB rigg this, or was this done after it left?

[Surmike]

Some of the rigging was redone after it left DCB. I bought the boat with no engine, drive or transom assembly. The previous owner had other plans for it that never happened.
So as a result I have nursed it back to a great boat.:)

[2forcefull]

so this is a DCH

[Surmike]

(so this is a DCH)
???????????????:confused: :confused:

[2forcefull]

I'd trade my Schiada plus cash
DCH= Daves custom hull, JK, lol

[Surmike]

Its laying in the shop when this picture was taken I had just finished detailing the engine compartment and engine. It is easier to just remove the rear seat to get to everything.

[Surmike]

Just upgraded the stereo head unit to a Clarion w/ a dash remote and a hand held remote. Also added new 1500 watt Fosgate amp w/ adjustment nob for the subs and by weeks end there will be 2 new 10" subs installed. Will post new pics this week when I get back by the shop

[Daytona100]

Nice boat and great price just needs about 2k more zip ties to meet the DCB alumni standards!!!!!!!!!:D

[Surmike]

I know I still need more ties:) :)

[BigBoyBlue]

we got a an '01 mach26 w/ a closed bow and a 525sc blower motor. one hell of a hull, we did 115mph no problem with about 350 more rpm left. handled like nice tits.

[Surmike]

Sounds awsome got a pic of it? I'd like to see what yours looks like w/ that motor:)

[Surmike]

:sqeyes: :sqeyes:

[Surmike]

:D :D :devil:

[Surmike]

Someone better jump on this quick before I go another route!!!:devil: :devil:

[tpmarine.com]

If you are looking for a Mach 26, this is one of the nicest that you will find anywhere. I have personally ridin in and drivin the boat and it runs out great.
I would invite anyone who is seriously interested in this boat to fly out and take a look for yourself. I will put you up in a hotel for the night and even buy some dinner...you can hang out with surmike and I and ask us all the questions you want. Hell, I will let you sleep in the boat, inside the shop if you want...:D
Seriously, I will pay for a room and dinner if you want to come out and take a look at the boat...you can check the rigging yourself.
If you have any questions, feel free to give me a call.
505 345-3760
Don B.

[Not So Fast]

GetReal Billet Trim Tank
http://www.***boat.com/forums/attachment.php?attachmentid=26491&d=1173970381
I LIKE IT, the tank that is, very cool, how mucho are they?? NSF

[Not So Fast]

http://www.***boat.com/forums/attachment.php?attachmentid=26491&d=1173970381
Just curious did DCB rigg this, or was this done after it left?
Yeah me too??:idea: Aren't the rings and rubbers for the tailpipes usually on the outside of the transom, mine are??? Just curious! NSF

[tpmarine.com]

I LIKE IT, the tank that is, very cool, how mucho are they?? NSF
I was selling them for $299.00 but they are hard to get these days. You can give GetReal Performance a call, he might still have a few colors available.
I have a yellow single trim tank in-stock and a red double tank in-stock but that is it. The are very nice units.

[tpmarine.com]

Yeah me too??:idea: Aren't the rings and rubbers for the tailpipes usually on the outside of the transom, mine are??? Just curious! NSF
Hmm, never really noticed that before, but somebody took the time to use stainless rings on the inside and outside...I would say that is a nice touch. :)

[Not So Fast]

Hmm, never really noticed that before, but somebody took the time to use stainless rings on the inside and outside...I would say that is a nice touch. :)
Wow that would be a good trick to install huh? FYI, my friend just sold his 2004 Mach 26 HP500 for I think $87,000 so there are buyers out there, hang in there ;)

[Surmike]

for the info and the support. I just hope this goes to someone who will truley enjoy it.

[bigq]

http://www.***boat.com/forums/attachment.php?attachmentid=26491&d=1173970381
Just curious did DCB rigg this, or was this done after it left?
WOW I have not seen a Blaster coil in ages. Nice boat:D

[tpmarine.com]

WOW I have not seen a Blaster coil in ages. Nice boat:D
Just curious, what do you prefer to run in your boat...msd makes some good stuff, but I prefer D.U.I.
http://www.***boat.com/forums/attachment.php?attachmentid=33088&stc=1&d=1181919041

[Surmike]

Someone wants an awsome boat for the lake!!!!!!!

[Surmike]

:devil: :devil:

[Surmike]

:jawdrop: :)

[Surmike]

:devil: :) :sleeping:

[Surmike]

for somone to get the deal they been waiting for.:eek:

[Tunnel Vision]

Take mine on trade and I'm interested:idea:

[Surmike]

Ticky Tock

[IDRPSTF]

As of this morning this boat is proudly offered for sale by SmugglersInc.com
Mike, John and I ran the boat to ensure quality and as it has been said throughout this thread... the boat is an impressive package at an inbeatable price. This 2001 DCB Mach 26 with trailer and covers is Offered for sale at $70K. We welcome you to make an appointment to veiw this increadible boat at our Lake Havasu City indoor showroom.
Please call:
928-505-TOYS and ask for either John Jacobs or Matthew DeLisio.
The boat has a fresh Rons Custom Detail and is ready for the 4th!!!