Found cheap ceramic coating in AZ!!!!!

[396_WAYS_TO_SPIT]

Yup thats right, there is a company out here that is coating headers for $180 and tunnel rams for $50! Thats half the cost of "Jethot" :eek: Here is the contact info. I was refered to them buy TX-19 and they do awesome work. This sint a spam by any means. I just want to help my fellow jetterson saving $$$$. I know that it takes alot of $$$ to build our boats so I am passing along info. They also do powder coating(candy's etc)For pics please see my thread;)
Affordable Powder Coating Co
(602) 272-7646
2111 West Fillmore
Phoenix,Az

[atxwrangler]

thanx for the info bro!:)

[Some Kind Of Monster]

Awesome! Definitely going to use them!

[ironman44bear]

Damn thats cheap, local shop here in fresneck ,cali told me 350.00 just to c-coat the headers:eek: WTF!!!!!!!!!!!!

[IMPATIENT 1]

thanks for the info mike, i'm gonna call monday and send him mine!! yours look great!

[jrork]

Screaming good deal. I've been quoted the $350 for headers price as well. Wish I was closer.....

[sandwindersandcars]

Yup thats right, there is a company out here that is coating headers for $180 and tunnel rams for $50! Thats half the cost of "Jethot" :eek: Here is the contact info. I was refered to them buy TX-19 and they do awesome work. This sint a spam by any means. I just want to help my fellow jetterson saving $$$$. I know that it takes alot of $$$ to build our boats so I am passing along info. They also do powder coating(candy's etc)For pics please see my thread;)
Affordable Powder Coating Co
(602) 272-7646
2111 West Fillmore
Phoenix,Az
You can also get on our website (sandwinder.com) to see pics of their work, they have powdercoated about 200 cars for us, and if you are on the eastside and do not have time to drive to the west, they pick up and deliver to our shop a couple times a week, we would be happy to send your parts in with our stuff at the same time. That goes for you to Mike, you could even walk your stuff over to our shop from yours.

[IMPATIENT 1]

Screaming good deal. I've been quoted the $350 for headers price as well. Wish I was closer.....
shipping will be about 75-80 there and back, still saves some $$$

[squirt'nmyload]

thats a good deal....for that price i might as well get them done:)

[brianthelion02]

Yup,greg is a cool kat,known him for several years!!!!!!!!!

[Some Kind Of Monster]

You can also get on our website (sandwinder.com) to see pics of their work, they have powdercoated about 200 cars for us, and if you are on the eastside and do not have time to drive to the west, they pick up and deliver to our shop a couple times a week, we would be happy to send your parts in with our stuff at the same time. That goes for you to Mike, you could even walk your stuff over to our shop from yours.
I'll be calling you very soon!
Billy

[cave]

Mike is that 180 each side or for both sides? .
sandwindersandcars, I like your rails! If you ever need a test driver I'll volunteer:D If it'll break I'll find the weak spot. I'm that good...:D :D :D

[396_WAYS_TO_SPIT]

Mike is that 180 each side or for both sides? .
sandwindersandcars, I like your rails! If you ever need a test driver I'll volunteer:D If it'll break I'll find the weak spot. I'm that good...:D :D :D
Thats $180 for both;) $50 for a intake;)

[396_WAYS_TO_SPIT]

You can also get on our website (sandwinder.com) to see pics of their work, they have powdercoated about 200 cars for us, and if you are on the eastside and do not have time to drive to the west, they pick up and deliver to our shop a couple times a week, we would be happy to send your parts in with our stuff at the same time. That goes for you to Mike, you could even walk your stuff over to our shop from yours.
Sounds like a plan to me;) Check you pm's;)

[FryJet]

Its not cheap.........................its INEXPESIVE. Cheap is how much you get a Snap-On tool box for from a tweeker in a mini van. ;)
F.J.

[Bigern]

looks like I'm gonna get my intake done, Mike I'll swing by and check out your goodies...are those your old headers?

[sandwindersandcars]

Mike is that 180 each side or for both sides? .
sandwindersandcars, I like your rails! If you ever need a test driver I'll volunteer:D If it'll break I'll find the weak spot. I'm that good...:D :D :D
How come everyone volunteers to test drive, how come know one ever volunteers to cut chromoly, or clean plasma tables,or repack cv's etc?

[sandwindersandcars]

I'll be calling you very soon!
Billy
no problem

[squirt'nmyload]

How come everyone volunteers to test drive, how come know one ever volunteers to cut chromoly, or clean plasma tables,or repack cv's etc?
i'll definately do all that stuff to be a test driver!!!:D

[cave]

How come everyone volunteers to test drive, how come know one ever volunteers to cut chromoly, or clean plasma tables,or repack cv's etc?
Cause fixing things is never as fun as breaking things. Heck if I had the time I would cut the Moly and test its strength... Fact is I'm better at breaking things than fixing them.
92° and its only March.
Mike, thanks for the hook up... and sandwindersandcars for the East side hookup!

[396_WAYS_TO_SPIT]

Its not cheap.........................its INEXPESIVE. Cheap is how much you get a Snap-On tool box for from a tweeker in a mini van. ;)
F.J.
and you would be the one to know all about that:idea: :) :) :)

[396_WAYS_TO_SPIT]

looks like I'm gonna get my intake done, Mike I'll swing by and check out your goodies...are those your old headers?
Holler at me brotha;) You will be impressed;)

[396_WAYS_TO_SPIT]

How come everyone volunteers to test drive, how come know one ever volunteers to cut chromoly, or clean plasma tables,or repack cv's etc?
Thats very true!!!
I may be talking with you about a sandcar after the g-wing is done;)

[79Challenger]

Had my short twisties and baffles done for $125

[Muldoon]

Does anyone know of anyone in the East bay of California that the could recomend to do coating on my exhaust?