PDA

View Full Version : Spark Plug wire loom brackets


Shack
03-14-2007, 08:31 AM
What's a good solid mount one for Headers?
thanks. :)
Moneypitt
03-14-2007, 09:01 AM
What's a good solid mount one for Headers?
thanks. :)
If it is a BBC use 90* boots and let them fall down away from the headers, then gather them up in a 2, 3, 4, type loom clips. OR contact gofastracer, he makes some bitchin' plastic loom/brackets that bolt on to the heads and allow the wires to fan out to the plugs........MP
Shack
03-14-2007, 09:12 AM
If it is a BBC use 90* boots and let them fall down away from the headers, then gather them up in a 2, 3, 4, type loom clips. OR contact gofastracer, he makes some bitchin' plastic loom/brackets that bolt on to the heads and allow the wires to fan out to the plugs........MP
that's what i have now. i just dont think it's that clean looking and was looking for some sort of solid mount. I'll check out the gofastracers!
thanks.
Shack
03-14-2007, 02:36 PM
MP
Does gofastracer have a web-site? cant seem to find them?:confused:
thanks
Moneypitt
03-14-2007, 03:43 PM
MP
Does gofastracer have a web-site? cant seem to find them?:confused:
thanks
No, just PM him and he'll tell you where to find pictures........MP
SmokinLowriderSS
03-14-2007, 04:26 PM
I am looking for online pix of the loom I used, but look at this:
http://i22.photobucket.com/albums/b315/robertryan/AaronsSS-9.jpg
And from the rear:
http://i22.photobucket.com/albums/b315/robertryan/AaronsSS-10.jpg
Similar, but mine are slightly larger, chrome, with holes in them, not slotted.
http://www.partsamerica.com/product_images/aap/mrg/6023.jpg
I ran straight (bendable) boots on the new MSD SC wires, and ran them as you see. The loom mounts between the Lightning headers and the Valve Cover.