Oil pan clearance

[patrolman808]

How much room do you guys have between the bottom of your oil pan and the hull? I was taking some measurements last night and it looked like I'm gonna have less than an inch with the stock oil pan.

[BACK2BIGRIVER]

How much room do you guys have between the bottom of your oil pan and the hull? I was taking some measurements last night and it looked like I'm gonna have less than an inch with the stock oil pan.
I have a 10 qt oil pan and i have about 1 1/2 " between the pan and the hull.

[Jetaholic]

I have a 9qt Canton pan and mine is about 3/4" from the hull.
Doesn't really matter as long as your driveshaft is lined up and the pan isn't hitting the bottom.

[Squirtcha?]

BBF mounted using a rail kit, with a dooley 10 quart pan and about 1" clearance at the closest spot. My loader is throughbolted and I trimmed the bolts off so there were only three threads showing. Also trimmed off the front two center intake bolts just to make sure nothing would rub..
My pump is setback 3" or so, which changes things around a little.

[Some Kind Of Monster]

I have maybe 3/4", but I have a setback as well. It sucks losing tools under there!

[79centurion]

Probably only 1/4"-1/2" where the bolts are for the loader., the rest about an 1"
Dan