Wanted Jet Boat Hull

[jet454boat]

im am looking for a new project so i need a project boat if any of you have one for sale or know anyone that has one up for sale please let me know it can be a bare hull or if it has a jet or a blown motor or something like that i may be interested in that also

[Red Lickin]

im am looking for a new project so i need a project boat if any of you have one for sale or know anyone that has one up for sale please let me know it can be a bare hull or if it has a jet or a blown motor or something like that i may be interested in that also
i have a 1977 kachina hull for sale. i was doing the same thing but don't have the time now.

[jet454boat]

your right down the road from me i live in mesa do you have any pics of the boat

[sdpm]

I have this one for sale. It is a 1979 Miller. Gelcoat is original and in very good condition. Upholstry is fair. Floor and stringers are solid. Engine is locked up due to rain water getting down headers and setting. No water was in the oil. Just a couple of spark plugs had a little rust on them. Has dual batteries, electronic ignition, tunnel ram with 660's, clean bassett headers w/ mufflers, Berkeley 12 JG w/ droop snoot and place diverter. Pump has 1 trip on it since rebuilt w/ new Legend impeller, new pump shaft, thrust brg, etc. Trailer is also in good condition. Could use some new tires. Title is free and clear and in hand on both. Located in San Diego. Call me for more info and pic's if interested. Open to offers?? Thanks Neil (619)698-9605 wk 9-6 m-f pst
http://www.***boat.com/image_center/data/520/medium/1935DSC03056.JPG
http://www.***boat.com/image_center/data/520/medium/1935DSC03057.JPG
http://www.***boat.com/image_center/data/520/medium/1935DSC03059.JPG
http://www.***boat.com/image_center/data/520/medium/1935DSC03060.JPG
http://www.***boat.com/image_center/data/520/medium/1935DSC03058.JPG

[dragstr19]

i have a kachina on this board for sale that i could pull the pump and motor out of.

[jet454boat]

i have a kachina on this board for sale that i could pull the pump and motor out of.
pm me a price me and my cousin were just looking at your boat its a mirror image of my uncles kachina except his is red yellow and orange you have a clean boat though

[sdpm]

PM sent. Boat has been stored inside. If you would like more pic's, just let me know. Thanks Neil

[dragstr19]

sent you a pm. give me a call

[76ANTHONY]

i have a v-drive, no engine and no interior, project boat:D 70 sanger flatty

[jet454boat]

i have a v-drive, no engine and no interior, project boat:D 70 sanger flatty
thanks for the offer but i would like to stick with jet's, i got a another boat with all the parts i need

[396_WAYS_TO_SPIT]

i have a kachina on this board for sale that i could pull the pump and motor out of.
I just viewed this hull last weekend! Its super clean!

[jet454boat]

bump to the top any other boats???

[396_WAYS_TO_SPIT]

What is your budget and what kind of condition are you looking for???

[BLOWN88FRESNO MINI]

I have a 1976 21'6" Fresno Daycruiser bare hull w/1991 V/M trailer, nice project and comes with 2 25 gal alum tanks, $800.00 takes it
Also I have a 1988 Fresno mini Cruiser 20'6" , Its a new bare hull, never rigged, has brand new Auto meter black gauges, new stringers, needs floor installed, sits on a 1976 V/M custom molded trailer. $2500.00
Plus I have many other performance parts available.
call Lee @ 559-352-1309
btwn 8am and 10pm

[76ANTHONY]

I have a 1976 21'6" Fresno Daycruiser bare hull w/1991 V/M trailer, nice project and comes with 2 25 gal alum tanks, $800.00 takes it
Also I have a 1988 Fresno mini Cruiser 20'6" , Its a new bare hull, never rigged, has brand new Auto meter black gauges, new stringers, needs floor installed, sits on a 1976 V/M custom molded trailer. $2500.00
Plus I have many other performance parts available.
call Lee @ 559-352-1309
btwn 8am and 10pm
pics?????? do ya have any of the 76 fresno?:D

[LUVNLIFE]

How about an Eliminator Sprint. Less pump, moter, needs interior and some hull repair. Located in Covina:)

[jet454boat]

What is your budget and what kind of condition are you looking for???
3-4 g's but i want something that im going to build myself and say i did it all

[76ANTHONY]

3-4 g's but i want something that im going to build myself and say i did it all
theres nothin like saying you did it all, thats for dam sure...hope ya find a nice one:D

[Partycattin]

a 70 something Ortiz. 21ish feet. Has a 454 that needs to be cleaned up and a froze pump.
needs a top to bottom resto. offers or trade.

[jet454boat]

thanks for all the boats guys but i bought RED LICKIN'S kachina

[squirt'nmyload]

thanks for all the boats guys but i bought RED LICKIN'S kachina
nice....frank was talking at dinner the other day about you getting it .......good luck getting it together :)

[Tyler&Emily]

I have a 72 Cole set up for a jet with the intake already installed, it is on a trailer, nice hull, stripped down but what a nice start for a project.
$850.00

[Nucking futs]

I have a southwind tunnel dragster, complete less motor for $8500 :sqeyes:
http://im1.shutterfly.com/procserv/47b7da09b3127cce83230b90cbc100000016101AZs2zdw5Zsd
http://im1.shutterfly.com/procserv/47b7da09b3127cce83230b9d4afc00000016101AZs2zdw5Zsd
http://im1.shutterfly.com/procserv/47b7da09b3127cce83230b98cbc900000016101AZs2zdw5Zsd

[smokinflatties]

I have a southwind tunnel dragster, complete less motor for $8500 :sqeyes:
http://im1.shutterfly.com/procserv/47b7da09b3127cce83230b90cbc100000016101AZs2zdw5Zsd
http://im1.shutterfly.com/procserv/47b7da09b3127cce83230b9d4afc00000016101AZs2zdw5Zsd
http://im1.shutterfly.com/procserv/47b7da09b3127cce83230b98cbc900000016101AZs2zdw5Zsd
i have seen that boat it is very nice