Header Coating Burning Up - Help

[Willis]

Hello People,
Need some help on which header manufacture to use?
The current headers are Rewarder and the coating burns of around 13-1350 degrees.
Does your manufacturer temp exceed 1500 degrees before burning off?
Where can I get the info
Thanks
Willis

[blue wonder]

Hello People,
Need some help on which header manufacture to use?
The current headers are Rewarder and the coating burns of around 13-1350 degrees.
Does your manufacturer temp exceed 1500 degrees before burning off?
Where can I get the info
Thanks
Willis
hey willis...we own a powdercoating shop here in yuma and we have a coating that is good to 1600 deg...find me in bakersfield and ill let you know more about it and can give you a ballpark price...i take it you want zoomies done????....thanks...tony...#475 Blue Light Special...(the old blue thunder boat...find me!!!!

[pw_Tony]

hey willis...we own a powdercoating shop here in yuma and we have a coating that is good to 1600 deg...find me in bakersfield and ill let you know more about it and can give you a ballpark price...i take it you want zoomies done????....thanks...tony...#475 Blue Light Special...(the old blue thunder boat...find me!!!!
I always wondered about power on headers that I've seen. At the shop I worked at it was baked at 400 degrees. But that's not the jet coat, just powder. Wouldn't powder just melt back off?

[blue wonder]

I always wondered about power on headers that I've seen. At the shop I worked at it was baked at 400 degrees. But that's not the jet coat, just powder. Wouldn't powder just melt back off?
its not a powder...it a special high temp coating that we use.

[Cs19]

Willis go see Jeff @ Embee in Santa Ana. They coat top alcohol and injected nitro car zoomies with some trick stuff. I saw some of Roy Miersch's zoomies in there and they looked nice. Maybe talk to Harold Jr. at Ming, hes involved with Embee.

[sandwindersandcars]

hey willis...we own a powdercoating shop here in yuma and we have a coating that is good to 1600 deg...find me in bakersfield and ill let you know more about it and can give you a ballpark price...i take it you want zoomies done????....thanks...tony...#475 Blue Light Special...(the old blue thunder boat...find me!!!!
is the 1600 degree stuff polishable?
i had always understood that the polishable ceramic is good to 1300degrees, and if you want higher temp capable, it has to be the flat finish ceramics, those are the ones that can go to 1600. i.e. flat black, flat red, flat blue,flat grey.
just wondering if they have come up with polished ceramic than can go higher temp before it burns, our buggy headers get burnt spots at the outsides of the exhaust bends.

[JR131]

hey willis we have had the gas motor prety hot and the coating is still there
its also polishable give jeff a call @714 546-6907 he will take care of you
see you at the race
jt

[moneysucker]

Don't use jet hot. It sucks. Tony, Your vinyl is being weeded as we speak and will be in Big D's hands this afternoon.

[pw_Tony]

For super cheap budget I have bought the Ceramic lookin 1600 degree spray bomb. I haven't used it on a boat, but I did spray a light coat on my black hooker headers, they haven't faded at all since I've done it, or burn off or anything, quite surprised I was. But what can I say I'm a poor white boy:devil:

[blue wonder]

is the 1600 degree stuff polishable?
i had always understood that the polishable ceramic is good to 1300degrees, and if you want higher temp capable, it has to be the flat finish ceramics, those are the ones that can go to 1600. i.e. flat black, flat red, flat blue,flat grey.
just wondering if they have come up with polished ceramic than can go higher temp before it burns, our buggy headers get burnt spots at the outsides of the exhaust bends.
its kinda like that but we have a new clear that goes over it that brings the shine out.

[Willis]

hey willis we have had the gas motor prety hot and the coating is still there
its also polishable give jeff a call @714 546-6907 he will take care of you
see you at the race
jt
Thanks jr,
For the contact and phone number for the headers coating.
:messedup:
I finally got my new parts from the manufacturer and they are awesome.
The bowl is very thick, much thicker than the original bowl and the pop off valve was fixed also. Thanks to Roy Miersch, the manufacturer.
I want to take this time to thank those who were involved in the re-fitting and massaging processes.
Thanks to Aggressor Jet Drive – Dave Jones for the quick response to the special request.
Thanks to Cyclone Speed and Marine – Jim Brock for the weekend work making the bowl flow better and help with the installation process.
Thanks to MPD for cutting the ride plate (I poped up without calling and Jack McClure stopped what he was doing and helped me)

[sandwindersandcars]

its kinda like that but we have a new clear that goes over it that brings the shine out.
nice, now they can look better longer.
have you guys figured out the endure shine stuff that edelbrock uses, and if so, how does it hold up for general parts use?
a guy at a speed shop said it is a ceramic

[blue wonder]

nice, now they can look better longer.
have you guys figured out the endure shine stuff that edelbrock uses, and if so, how does it hold up for general parts use?
a guy at a speed shop said it is a ceramic
we havent been able to get it...i wish we could that stuff is cool!

[tiki god]

willis give me a call after the race and i will dial you in. i have a polished coating you will love. jeff-embee

[moneysucker]

willis give me a call after the race and i will dial you in. i have a polished coating you will love. jeff-embee If you have Pix of the coating on dry headers that have been run. Please post up. I am very interested.
Cy

[blue wonder]

If you have Pix of the coating on dry headers that have been run. Please post up. I am very interested.
Cy
hey buddy keep your business where it belongs!!!!!...get ahold of me

[Willis]

willis give me a call after the race and i will dial you in. i have a polished coating you will love. jeff-embee
Jeff,
I sure will
Thanks

[moneysucker]

hey buddy keep your business where it belongs!!!!!...get ahold of me
If you have some that are done I want to see them. If not, I have a set of jet hotted ones that look like hell. I like shiny things!!!! Big D has your stickers by the way. Good luck this weekend.

[Cs19]

jeff-embee
Whats up Jeff?
Ill be coming to see you for some anodizing on my ride real soon. Thanks for everything over the past few years..
Chris.

[tiki god]

working way too much, but that's a good thing. thank you for helping us porve-out some of our coatings. no problem with your anodizing - i'll take care of it for you. hitting water wheel anytime soon?