PDA

View Full Version : 500 Inch Stroker BBF Race Engine Complete



Squeezing Spectra
05-02-2007, 07:13 PM
I have a 500 inch BBF stroker race engine that needs to go it is complete ready to run, it has a 4 bolted block, modified d port flowed SCJ heads, arias 13.5- pistons, long rods, bhj damper,polished tunnel ram with two 1050 dominators, electronic ignition,enderle linkage, dooley oil pan, starter motor, 1350 coupler, all marine hardware polished aluminum, front and rear aluminum rail plates, chevrolet header adapters, altenator and billet pulleys, big solid camshaft with all crane roller gear, makes over 700hp cost $12,000 asking $5000 for everything, i will post pictures as soon as i can. Thanks B :D

Squeezing Spectra
05-02-2007, 08:36 PM
http://i135.photobucket.com/albums/q129/scupper500/MVC-010F.jpg

Squeezing Spectra
05-07-2007, 05:51 PM
Needs to go $4500 :D

vee-driven
05-07-2007, 07:21 PM
how much for the boat it's in?

smokinflatties
05-07-2007, 07:25 PM
it come with headers ?

Squeezing Spectra
05-07-2007, 07:58 PM
Comes complete with everything but the headers :D

Squeezing Spectra
05-09-2007, 09:05 AM
Someone needs a ford :D

Hustler
05-09-2007, 09:12 AM
Someone needs a ford :D
I got a anchor already:D

mouzer
05-09-2007, 11:46 AM
my brother said if he gets the harley sold he will take it!

Squeezing Spectra
05-16-2007, 12:36 PM
Still for sale :D

Squeezing Spectra
05-23-2007, 11:12 AM
I really want this out of my garage who needs a ford :D

Squeezing Spectra
05-29-2007, 10:59 AM
Ttt :d

Squeezing Spectra
05-31-2007, 08:31 AM
Anybody LOL :D

mirrorimage
06-01-2007, 09:36 PM
i wish i could afford it bruce ... it look great in my shed...waitin for the race boat
:(

Squeezing Spectra
06-10-2007, 08:53 AM
Come on somebody need this thing i want it out of my garage :D

vee-driven
06-10-2007, 01:20 PM
I HAVE $3k

Squeezing Spectra
06-10-2007, 08:34 PM
Sorry it is going to take a little more than that. :D
Thanks B

Squeezing Spectra
06-19-2007, 08:36 AM
Ok last price drop $4000 it needs to go :D

Squeezing Spectra
06-20-2007, 07:17 AM
Sale Pending :D

Squeezing Spectra
07-01-2007, 08:37 AM
Still for sale :D

Squeezing Spectra
07-12-2007, 01:44 PM
Ok it really needs to go

Squeezing Spectra
08-05-2007, 09:55 AM
Ok somebody needs a ford i want this thing gone before i start parting it out :D
Thanks B

Squeezing Spectra
08-09-2007, 07:37 AM
$3500 less dominators or $4000 turn key :D

mirrorimage
08-10-2007, 03:52 PM
trying to get te money ... need winning lottery ticket !!!!

Squeezing Spectra
08-10-2007, 03:58 PM
Ok cool when i get the winning ticket i will give you the motor LOL :D

dmontzsta
08-15-2007, 10:13 PM
Sent you a PM regarding the adapters, just let me know. :)
Thanks.
FREE BUMP

Squeezing Spectra
08-20-2007, 08:23 AM
Don not going to part it out yet but i will let you know if i do.
Thanks B

Squirtin Thunder
08-22-2007, 09:01 PM
I wish I had some extra cash or a sponsor, that would be a great base for a Comp Jet or a Pro Stock engine.

Squeezing Spectra
09-11-2007, 09:37 AM
OK i really want this out of my garage pan is off so you can inspect it and it come complete drop it with motor plates all accesories except headers last price drop $3500 for everything :D
Thanks B

Squeezing Spectra
09-14-2007, 09:53 AM
Bump it needs to go someone needs a FERD :D

Reapers
09-14-2007, 10:50 AM
What Crank? What rods? Boss block or aftermarket? What oil pump? Thanks Tobi

Squeezing Spectra
09-17-2007, 07:59 AM
Ford crank , billet rods, arias pistons, 4 bolt converted block, hv pump and dooley pan. :D

Squeezing Spectra
09-18-2007, 08:59 AM
Bump :D

Squeezing Spectra
09-25-2007, 06:11 AM
Weekly bump needs to go :D

FUTURE
09-25-2007, 10:37 PM
How many hours? Who built it? Got a friend that may need a motor.

Squirtin Thunder
09-25-2007, 10:56 PM
OK i really want this out of my garage pan is off so you can inspect it and it come complete drop it with motor plates all accesories except headers last price drop $3500 for everything :D
Thanks B
Bruce I think it needs to be tested at the next SCSC event, I have a Sanger that it would go right into for a test.:D

Squeezing Spectra
09-26-2007, 09:28 AM
How many hours? Who built it? Got a friend that may need a motor.
It has less than an hour on it :D

Squeezing Spectra
09-26-2007, 09:29 AM
Bruce I think it needs to be tested at the next SCSC event, I have a Sanger that it would go right into for a test.:D
Well then buy it LOL :D

riverbound
09-26-2007, 09:33 AM
I need a sponsor too :rolleyes:
If the tunnel ram came off and it went to a single carb deal....how do you think it would work? I have an engine cover to deal with.

Squirtin Thunder
09-26-2007, 10:25 AM
I need a sponsor too :rolleyes:.
Who said anything about sponsors Bill ? BTFO !!! It was just a bump for Bruce.
If the tunnel ram came off and it went to a single carb deal....how do you think it would work? I have an engine cover to deal with.
The 400hp you have right now is way too much for that boat, you would end up hurt or dead.

Squirtin Thunder
09-27-2007, 10:57 PM
Ya know you are just not to bright, like I said I was just bumping for Bruce.
Set that thing up with 700hp and have fun.:D

Blueoval
09-28-2007, 12:12 AM
Ok we know it's 500 cui??
Tell me the stroke, bore, rod length, make of rods, what block is it and what heads? i'd like to see the castings on the heads and on the block... What size is the oil pan?
Have cash, Moving to Michigan end of OCT need the info above and we'll talk about pick up or ship..
thanks
adam

riverbound
09-28-2007, 12:45 AM
Who said anything about sponsors Bill ? BTFO !!! It was just a bump for Bruce.
Last I checked You did...a couple posts above mine ;)

riverbound
09-28-2007, 12:54 AM
When the right person sets up the boat it can handle 400hp and more. I am thinking Bill can handle the HP with no problem:idea:
The boat has already been to Papp's shop to fix the things "Someone" did to the boat. It already has more than 400 Hp (per the Dyno sheets from the original build) so Im guessing "Somone" isnt as knowledgeable as he thinks (could be the reason the boat had to go to Papp to be fixed).

396_WAYS_TO_SPIT
09-28-2007, 07:47 AM
Come on guys. Bruce doesnt need this stuff in his thread. All he trying to do is sell a damn FURD..........
Bump for Bruce....

Mrs. Bordsmnj
09-28-2007, 09:18 AM
Guess I am just dumb as a box of rocks :rolleyes:
DeeDeeDee! :mix:

riverbound
09-28-2007, 09:22 AM
Come on guys. Bruce doesnt need this stuff in his thread. All he trying to do is sell a damn FURD..........
Bump for Bruce....
Bruce was the one who brought Jim's assinine comments to my attention last night ;)

78CoLe
09-28-2007, 11:29 PM
is this still for sale bruce intersted in it beside tunnel ram and carb already have that pm me thanks jeremie

Squeezing Spectra
10-01-2007, 11:46 AM
PM`s & Messages returned someone buy it LOL :D
Thanks B

Squeezing Spectra
10-04-2007, 06:48 AM
Bump :D

Squirtin Thunder
10-12-2007, 08:37 AM
Is it sold yet ?

obnoxious001
10-12-2007, 10:36 AM
Is it sold yet ?
Last time I was over there he still had it. I know he is supposed to be gone dirt track racing for a couple of days, don't expect a reply until Sunday sometime.

suckin&pumpin
10-12-2007, 01:52 PM
if you sell it without t ram im interested in t ram

DansBlown73Nordic
10-13-2007, 02:07 AM
Bump!!!!;)

Squeezing Spectra
10-23-2007, 08:48 AM
Sale pending :D

Squeezing Spectra
11-01-2007, 11:06 AM
Still for sale buyer could not come up with the money :idea:

Squeezing Spectra
11-09-2007, 08:51 AM
Friday bump :D

396_WAYS_TO_SPIT
11-09-2007, 09:27 AM
Damn Bruce! you still have this motor??? If I was a FURD guy i would be all over it....

Squeezing Spectra
11-16-2007, 08:13 AM
Yep i still have it i can not believe it has not sold it is a very nice motor just like new i have had alotta flakes that wanted it but have seen no money :)
Thanks B

Squeezing Spectra
11-19-2007, 07:55 AM
$3500 for the whole thing :D i want it gone.

Some Kind Of Monster
11-19-2007, 08:35 AM
Good deal! :)

Squeezing Spectra
11-23-2007, 10:11 AM
Weekend Bump :D

Squeezing Spectra
12-04-2007, 03:18 PM
Ok sale really is pending LOL :D