PDA

View Full Version : floor repair questions



mrossum
02-13-2006, 02:11 PM
have to replace my floor. where do i get marine plywood for this repair?
mrossum@verizon.net

blown540hydro
02-15-2006, 03:41 PM
Allied Veneer
Phone: 800-540-7040
Fax: 323-587-6808
URL: www.alliedveneer.com

mrossum
02-16-2006, 12:59 PM
Allied Veneer
Phone: 800-540-7040
Fax: 323-587-6808
URL: www.alliedveneer.com
thanks. will give them a try.............

Tom Brown
02-16-2006, 03:07 PM
You don't need marine ply for floor replacement. I've used it and it's great but I've also used CDX and it's just as good. For a transom or stringers, marine ply is required. Not for a floor that is going to be carpeted, though.

1979tarva
02-16-2006, 04:29 PM
I used exterior grade plywood from homedepot thr thickest you can find then coated it in epoxy paint then glassed it in to the hull it works great like this

BadKachina
02-19-2006, 06:26 PM
I used exterior grade plywood from homedepot thr thickest you can find then coated it in epoxy paint then glassed it in to the hull it works great like this
I resin coat any bare wood that I put into a boat. I guess epoxy would work also. Resin might be cheaper??

1979tarva
02-26-2006, 12:31 PM
i used epoxy garage paint from lowes it but it was the american tradition stuff so far its worked great for me