PDA

View Full Version : Turn-key Clean And Fast Jet


skinut
06-19-2007, 07:28 AM
1976 Anthony Jet , 19-6 ft, Big block Ford , All alum chomed, ported and polished Mid rishers heads, Blue printed 575 HP, New Bassett water injected Headers with muffers, Engine built by Ron Miller at Ford Power Parts. Berkley Super Jet 12 JB, with A+ S/S impeller, Racing intake, 5/8 full ride plate, 2" high and low intake grade, chromed racing snoop, Cable racing steering, Custom New interior, All balsa wood flooring with full runners, Bottom blue printed with a ride delta intake, New tires on custom trailer. Full towing cover, Very clean fast and denpenable at 85+ MPH. One boat owner from 1976. Need bigger boat for family. Looking for 21 ft Schiada. Will sell for $12,500 OBO Daytime cell #909-957-8116 home #909-861-8876
e514jet
06-19-2007, 10:06 AM
skinnut,
Nice boat!!
who did your balsa floor and which parts are balsa? floor supports or just the
floor itself? E
skinut
06-19-2007, 11:20 AM
skinnut, The Balsa wood is from the bulkhead to the transome. Inside and outside of the runners it all Balsa wood floor form day one 1976. I also do Balsa wood flooring in all boats. I have done 4 flat bottoms this yaer!
Nice boat!!
who did your balsa floor and which parts are balsa? floor supports or just the
floor itself? E
The Balsa wood is from the bulkhead to the transome. Inside and outside of the runners it all Balsa wood floor form day one 1976. I also do Balsa wood flooring in all boats. I have done 4 flat bottoms this yaer!
e514jet
06-19-2007, 04:20 PM
Where did you get your balsa and what size and thickness are the stringers and the thickness of the floor? 1/2, 3/4?
What type of resin did you use to seal the wood? thanks E
Would like to talk to you on the phone. I will PM you my phone number.
skinut
06-20-2007, 06:21 AM
Where did you get your balsa and what size and thickness are the stringers and the thickness of the floor? 1/2, 3/4?
What type of resin did you use to seal the wood? thanks E
Would like to talk to you on the phone. I will PM you my phone number.
The floor in my jet is 3/4 balsa wood to the stringers. I have 1/2 balsa wood at my house that I have been using on the flatbottoms. With the layers of glass billed up comes out to be almost 3/4 for a good flooring.