Sneak peak.

[Danhercules]

I had to smuggle a camera in!! Very tight security! All top secret stuff!
http://www.hotboatpics.com/pics/data/500/4763528_front_.jpg
http://www.hotboatpics.com/pics/data/500/4763528_fntside-med.jpg
I can almost hear it!!!!

[victorfb]

way cool dan. is that the new motor thats going to get you over 70mph with great fuel economy? :D just funnin with ya man. looks killer, cant wait to see it run. congrats.

[396_WAYS_TO_SPIT]

You have been quiet lately. I was wondering about ya;) When is the born date?

[Danhercules]

way cool dan. is that the new motor thats going to get you over 70mph with great fuel economy? :D just funnin with ya man. looks killer, cant wait to see it run. congrats.
I guarantee you that my boat will go farther than Lets Dance! :D :)
1/2 throttle is less fuel than 3/4 throttle, right? :messedup:

[Danhercules]

You have been quiet lately. I was wondering about ya;) When is the born date?
Just like a baby, anyday now! LOL.
Boat should be on the water in about 2 weeks!!!!

[Squirtcha?]

way cool dan. is that the new motor thats going to get you over 70mph with great fuel economy?
That single toilet bowl (dominator) will probably net him better mileage than my two 660s.
Looking good Dan. Hoping you're gonna post up some specifics on it?

[Danhercules]

That single toilet bowl (dominator) will probably net him better mileage than my two 660s.
Looking good Dan. Hoping you're gonna post up some specifics on it?
Lets just say its not "stock":crossx:
Toilet bowl!! LOL Thats funny. 1150 Dom that is.
Its a Ford 528. Full roller, Blue Thunder heads. Pump Gas.

[Beautiful Noise]

Lookin good Dan:) Even if it is a Ford:D :D

[Sleeper CP]

Lets just say its not "stock":crossx:
Toilet bowl!! LOL Thats funny. 1150 Dom that is.
Its a Ford 528. Full roller, Blue Thunder heads. Pump Gas.
Good luck with the new baby. Just checking ,are you running a HI-Flow Power Valve in that Dominator?
Sleeper CP

[dmontzsta]

Nice! That means mine is coming soon!!! :)

[Rattle Can Lou]

Nice! That means mine is coming soon!!! :)Hey "Grand WIZZER". Aren't you putting the horse before the carriage. Maybe you should get that so called boat of your's done before you start worrying about the engine. By the way....How's the hunt for some new cases going?. Rumor has it your so cheap your now looking for a jet.

[dmontzsta]

Hey "Grand WIZZER". Aren't you putting the horse before the carriage. Maybe you should get that so called boat of your's done before you start worrying about the engine. By the way....How's the hunt for some new cases going?. Rumor has it your so cheap your now looking for a jet.
What are you doing in the jet section? I thought it was hard enough for you to just find the V-Drive section? ;)
The boat is ready for re-rigging now, all of the parts are polished and layed out next to it, I am just trying to decide on what "scheme" or coating I want to use.
The case hunt is done...I think? :)

[Rattle Can Lou]

I am just trying to decide on what coating I want :)
I think some of Kim Hanson's throat yogurt will do the trick on that POS!!

[LakesOnly]

http://www.fordforums.com/images/smilies/cussing.gif Hey Herc, WTF? Smuggling in a camera and snapping photos? Motor ain't done yet.
You are hereby banned from the shop until completion/pick up, and even then you will still be asked to empty your pockets and receive a pat down before being alowed to enter!
Sheez, this is as bad as those new car those spy photos I see in the car mags. http://www.fordforums.com/images/smilies/doh.gif
http://www.fordforums.com/images/smilies/nono.gif
LO

[dmontzsta]

I think some of Kim Hanson's throat yogurt will do the trick on that POS!!
No way, I saw what it did to the bottom of your GN boat, that shit is toxic.

[hotbo]

very nice bet that will get someones attention:hammer2: wish you luck:D

[Danhercules]

:messedup: http://www.fordforums.com/images/smilies/cussing.gif Hey Herc, WTF? Smuggling in a camera and snapping photos? Motor ain't done yet.
You are hereby banned from the shop until completion/pick up, and even then you will still be asked to empty your pockets and receive a pat down before being alowed to enter!
Sheez, this is as bad as those new car those spy photos I see in the car mags. http://www.fordforums.com/images/smilies/doh.gif
http://www.fordforums.com/images/smilies/nono.gif
LO
Dude, You did do a pat down, but I though you just wanted to feel my belly.
I bet you and that rubber glove of yours will do more searching when I pick up that beast!! NO FISTING!!!!!!!!!!!!!!
:messedup:

[suckin&pumpin]

lookin good, love to see the ford love

[Jet Hydro]

A ford yuck!!!!!!! http://www.clicksmilies.com/s1106/wuerg/vomit-smiley-008.gif J/K Looking good Dan ;)
now heres a real motor ;)
http://www.hotboatpics.com/pics/data/500/15497P1030841-med.JPG

[dmontzsta]

A ford yuck!!!!!!! http://www.clicksmilies.com/s1106/wuerg/vomit-smiley-008.gif J/K Looking good Dan ;)
now heres a real motor ;)
http://www.hotboatpics.com/pics/data/500/15497P1030841-med.JPG
Where is the distributor? :eek:
Hey Dan, that carb looks great! ;)
Is the manifold polished?

[Jet Hydro]

in the back, behind the blower, where all distributors should be :) :D lol

[dmontzsta]

in the back, behind the blower, where all distributors should be :) :D lol
:) Are you going to fix the problem and move it to the front? like alot of the big dogs do? :D

[Jet Hydro]

not enough room on the floor for it up front ;)

[Blown 472]

A ford yuck!!!!!!! http://www.clicksmilies.com/s1106/wuerg/vomit-smiley-008.gif J/K Looking good Dan ;)
now heres a real motor ;)
http://www.hotboatpics.com/pics/data/500/15497P1030841-med.JPG
Stop mucking up a nice ford thread with that ****ing junk.:devil:

[Jet Hydro]

learn to take a JOKE man :rolleyes:

[Blown 472]

learn to take a JOKE man :rolleyes:
It was, sheesh.:) :) :) :) :) :D :D :D

[Danhercules]

Fords are better in low freeboard boats. The water cant hit the dizzy! LOL:D
D-monster has a little bit of smarts, he runs a ford. He would be a genius if he ran a jet! LOL :devil: :D :)

[Blown 472]

Fords are better in low freeboard boats. The water cant hit the dizzy! LOL:D
D-monster has a little bit of smarts, he runs a ford. He would be a genius if he ran a jet! LOL :devil: :D :)
When are you going to fire that thang up?

[Danhercules]

When are you going to fire that thang up?
When that rubber glove wearin anal inspectin long haired mad scientist lets me!!!! :D
Soon, very soon.

[dmontzsta]

Fords are better in low freeboard boats. The water cant hit the dizzy! LOL:D
D-monster has a little bit of smarts, he runs a ford. He would be a genius if he ran a jet! LOL :devil: :D :)
Maybe I will move "up" into a jet once I get sick of the V-Drive. ;)
Polished manifold? or non polished manifold? :)
We need to get together, it has been a while...let me know when you are ready for your maiden voyage, maybe I can join you with the old man's cruiser.

[Danhercules]

Maybe I will move "up" into a jet once I get sick of the V-Drive. ;)
Polished manifold? or non polished manifold? :)
We need to get together, it has been a while...let me know when you are ready for your maiden voyage, maybe I can join you with the old man's cruiser.
I will be makin a few test runs at Elsinore. You are more than welcome to come along. In the TPR or your own ride. I will let you know.
I will be at CLM this weekend.
For now Polish on the valve covers. I am gonna powdercoat them. Intake is powder coated silver or gray. What ever you wanna call it. I am sick of polishing.

[dmontzsta]

I will be makin a few test runs at Elsinore. You are more than welcome to come along. In the TPR or your own ride. I will let you know.
I will be at CLM this weekend.
For now Polish on the valve covers. I am gonna powdercoat them. Intake is powder coated silver or gray. What ever you wanna call it. I am sick of polishing.
I am with you on the polishing. I am thinking of powdercoating as well. Who did the work for you? it is hard to see how it matches the carbs by the camera phone pics. :)

[Danhercules]

Come on down to CLM this weekend and check it out! LOL

[78Southwind]

Dan
I got your picture of the engine looks cool. When is it going to the dyno?

[78Southwind]

http://www.***boat.com/image_center/data/500/1676Dans_TPR.jpg

[Sleeper CP]

Come on down to CLM this weekend and check it out! LOL
What are the spec's on that boat of yours? Is like a Lighting deck of what, and can I find the Company on the net?
Sleeper CP

[Taylorman]

Its the same as an Ultra 21 Deck. His is a Tom Papp deck from the same mold as the Ultras.

[Danhercules]

What are the spec's on that boat of yours? Is like a Lighting deck of what, and can I find the Company on the net?
Sleeper CP
As Tayorman said. You can buy it now from Ultra. I think Ultra started them in 02.
Mine is a 95 TPR (Tom Papp Racing).
I wanted a family hot boat. This boat should move good with the BBFERD

[Sleeper CP]

As Tayorman said. You can buy it now from Ultra. I think Ultra started them in 02.
Mine is a 95 TPR (Tom Papp Racing).
I wanted a family hot boat. This boat should move good with the BBFERD
Thanks for the info. Good luck with the new engine. Are you going to have to do any pump upgrades?
Sleeper CP

[Danhercules]

When I bought the boat, it was Dan Nelson's boat, it just had a PSI blower motor in it. This boat use to do 100MPH. He left the pump alone. He did sang the SS imp that was in it a put an Alum one in it. The motor that came with the boat was 400 HP chevy. The shaft is hardended and cut for an inducer. Loader and shoe and ride plate were left alone.
Later in the season I am gonna swith out the imp and thow in an induce.

[dmontzsta]

When I bought the boat, it was Dan Nelson's boat, it just had a PSI blower motor in it. This boat use to do 100MPH. He left the pump alone. He did sang the SS imp that was in it a put an Alum one in it. The motor that came with the boat was 400 HP chevy. The shaft is hardended and cut for an inducer. Loader and shoe and ride plate were left alone.
Later in the season I am gonna swith out the imp and thow in an induce.
Are you still going to put a stripper pole in the deck area? That should cut some serious wind.:devil:

[Sleeper CP]

Stripper pole will create drag and slow down your top speed, but you'll be the life of the sand bar.:) :D
If I can get my s-it together at work I would love that type of deck boat. Great family boat.
Sleeper CP

[dmontzsta]

Did you get the motor installed ok? when is the maiden voyage?

[Nucking futs]

Did you get the motor installed ok? when is the maiden voyage?
We just put a block in it so he could get the measurments for his headers. They only had one 460 block to loan out to get it mocked up and I want to be the first to thank you Don, Your block looks killer setting in Dans boat...:D

[dmontzsta]

We just put a block in it so he could get the measurments for his headers. They only had one 460 block to loan out to get it mocked up and I want to be the first to thank you Don, Your block looks killer setting in Dans boat...:D
:) I bet it does, it is a bitchen block with pretty much everything under the sun done to it. :D
You should drop it in the tunnel so you can see what it looks like, you just might toss the chevy to the side. ;) :D