View Full Version : Turbo cam help
fc-pilot
07-05-2007, 04:11 PM
Who is the best cam manufacturer as far as turbo cams go. We are looking at putting a hydraulic roller in this time around and would like some ideas.
Paul
texas-19
07-06-2007, 06:32 PM
Call this guy,he knows turbo motors
http://www.camshaftinnovations.com/
Marty Gras
07-06-2007, 08:18 PM
"No refunds No exchanges!"
Sleeper CP
07-07-2007, 03:24 PM
Try Dan Crower at 866-361-2267. Or at www.CrowerPower.com ask Dan if he'll do a custom cam for you. Just tell him what you have and what you want it to do. If I were going to get a catalog cam I would check CompCams or Crane and Isky. You can't go wrong with either one they all have good catalog parts.
Sleeper CP
fc-pilot
07-07-2007, 11:09 PM
I may give him a call Monday. I am not looking to stick a catalog cam in this thing. I don't want to have to pull this thing back apart because it was not quite what I was hoping for. Thanks a ton guys.:)
Paul
tbanzer
07-08-2007, 09:09 AM
cstraub69 on this board would be my first choice. Maybe he will chime in or try to send him a pm. www.straubtechnologies.com
dc96819
07-08-2007, 10:21 PM
Ed Curtis
http://flowtechinduction.com/
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.