PDA

View Full Version : "Nicson" numbers


Kindsvater Flat
11-23-2002, 05:17 PM
Anyone know if the part numbers that are casted into Nicson cover plates are there own system or oem numbers?
I pulled mine apart and would like to go with the smaller flywheel and gear reduction starter rather than the LARGE flywheel and direct drive starter thats on there now.
BTW its Chrysler.
Sangster
11-23-2002, 05:30 PM
Mike, give Dave a call at GT Boats.. He can get you what you want & UPS it to you.. Tell I sent you.... wink wink wink wink
Oh, the # is 707-864-1924
[ November 23, 2002, 05:31 PM: Message edited by: Sangster ]
Kindsvater Flat
11-23-2002, 05:49 PM
Thanks I will give him a call. Is that the work number or home?
Sangster
11-23-2002, 05:52 PM
That's the Shop..There closed till Tuesday 9:00AM.
MoJetBoPar
11-25-2002, 07:42 AM
Chrysler??
I've got a Nicson bellhousing, I'll go check the #'s on it.
Are you talking about going from the 143 to a 130 tooth flywheel?
I've got both a jet boat and a v-drive with B/B Mopar wedge power. I'd like to see pic's of yours if convenient.
Kindsvater Flat
11-25-2002, 07:09 PM
Ok what I have is a 172 tooth flywheel with a direct drive starter(tin can). This is a 440 chrysler, 6 bolt flywheel. I would like to get away from the current setup and get the smaller flywheel. I have other flywheels just not another cover plate. So if anyone has one that would like to trade let me know.
Mopar guy I will post some pics in a bit while I upload, in mean time goto my website and you can see my boat there. Same one as the avatar.
Kindsvater Flat
11-25-2002, 07:36 PM
Here are some pictures.....
http://www.saber.net/~atthefarm/pic/72%20kindsvater1.JPG
http://www.saber.net/~atthefarm/pic/melissa.jpg
http://www.saber.net/~atthefarm/pic/motor.jpg
Kindsvater Flat
11-26-2002, 09:15 PM
I found my answer......its way cheaper to make my own adapter plate. Don't really think I need to spend 250 bucks on a plate that I don't like the looks of.
Sangster
11-26-2002, 09:19 PM
mike, how much did ya have pay the "Hottie" to sit in your boat..... eek! eek!
http://www.saber.net/~atthefarm/pic/melissa.jpg
Kindsvater Flat
11-26-2002, 09:31 PM
That was a freebie!!!!
You like that?
MoJetBoPar
11-27-2002, 06:08 AM
Kindsvater,
I looked into that website earlier and couldn't find your flattie. Nice pic's!! I like your hull better than my RaysonCraft.
The only numbers that I found on my Nicson BH are these "101 7". Dunno what they mean.
Also found this, "use Starter # 1889200 & Flywheel #2121950". Those look like Chrysler production OEM part numbers to me.
I also spotted this on eBay....
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=1873341072
Kindsvater Flat
11-27-2002, 07:13 AM
MoJetBoPar:
Kindsvater,
I looked into that website earlier and couldn't find your flattie. Dude its at least on every page once if not twice. And thanks for finding that but I noticed that the guy in e-bay cut the feet on his cover plate and made the adapter plate also. (I'm guessing)
And thanks for the comments
MoJetBoPar
11-27-2002, 09:23 AM
Sorry, bad eyesight when it came to spotting your nice flattie.
Yeah, at least the dude says it in the ad about the ears being cut. I don't know why people ruin those nice vintage pieces like that. My guess is to get it into a hull with narrowly set stringers?
Good luck with your set-up.
Nice Mopar B/B by the way.