Gelcoat fiberglass repair in norcal?

[badluck]

Anybody have a recommendation? I live in the bay area.The fiberglass/gelcoat looks like it is falling apart at the lower outer portion of the passenger sponson,right by the cavatation plate.I'll try to post some pictures.I can't figure out what could've caused it. Any ideas? Thanks

[DCBob]

Anybody have a recommendation? I live in the bay area.The fiberglass/gelcoat looks like it is falling apart at the lower outer portion of the passenger sponson,right by the cavatation plate.I'll try to post some pictures.I can't figure out what could've caused it. Any ideas? Thanks
Jeff Glow...Smooth As Glass Riverbank, Ca They don't get no better than Jeff!! 209 869-3545

[DAVEO]

Jeff at smooth as glass.. 209-869-3545

[badluck]

thanks,I'm calling tomorrow.Where is Riverbank?

[DCBob]

thanks,I'm calling tomorrow.Where is Riverbank?
Real close to Modesto. Less than 2 hrs from the Bay Area

[Eliminator 4 Life]

Real close to Modesto. Less than 2 hrs from the Bay Area
DCBOB hes probably like 2 hours 45 mins maybe 3. But smooth as glass is the best in the area. I would definatley go there...

[DAVEO]

He is the only one. Do not go anywhere else.....:D

[DCBob]

DCBOB hes probably like 2 hours 45 mins maybe 3. But smooth as glass is the best in the area. I would definatley go there...
My bad ;) I thought he could make it from Redwood City in about 2 or so :)

[Cas]

My bad ;) I thought he could make it from Redwood City in about 2 or so :)
580 = 4 hrs :D

[DCBob]

580 = 4 hrs :D
Hater :D

[acatitude]

Ditto smooth as glass Steve, it don't get any better

[Cas]

Hater :D
realist :jawdrop: :D
took us 3 1/2 hrs to get from San Mateo to Livermore not too long ago.....closest I've ever come to chewing my arm off :D

[DCBob]

realist :jawdrop: :D
took us 3 1/2 hrs to get from San Mateo to Livermore not too long ago.....closest I've ever come to chewing my arm off :D
Dang homie....thats some serious shit! ;) :D

[DAVEO]

realist :jawdrop: :D
took us 3 1/2 hrs to get from San Mateo to Livermore not too long ago.....closest I've ever come to chewing my arm off :D
Must have been a friday around 5pm...

[badluck]

3-4 hours no problem.I've driven too and from john's custom marine 2 different times in 1 day.Thanks for the help.Hey blowncarrera,how do you like that 26? Do they make a 24-26 sport deck?I'm looking 4 something a little bigger.

[Cas]

it was a Friday but we left SM at 2pm to beat the rough stuff. We were going to Vegas and figured we'd be able to make it by midnight. It was 6am when we finally rolled into Hendersen.
I told my kids, "If I ever hear you ask "are we there yet" again, I will toss you out the window" :D
sorry for the hi-jack

[acatitude]

3-4 hours no problem.I've driven too and from john's custom marine 2 different times in 1 day.Thanks for the help.Hey blowncarrera,how do you like that 26? Do they make a 24-26 sport deck?I'm looking 4 something a little bigger.
Me likey my grocery getter now that I fixed the stereo, LOL didn't know you had to plug them in...
Not sure about bigger cats but 24-26 isn't bigger unless Im missing something here??
Howards 28 bullett v is a hell of a boat I hear

[brad22]

Anybody have a recommendation? I live in the bay area.The fiberglass/gelcoat looks like it is falling apart at the lower outer portion of the passenger sponson,right by the cavatation plate.I'll try to post some pictures.I can't figure out what could've caused it. Any ideas? Thanks
Check the sig. No doubt the best in the biz. :)
Brad

[badluck]

I meant bigger than my 20 sst. Sorry for the confusion.The 28 deck looks nice but it's too big for me.

[Cas]

Check the sig. No doubt the best in the biz. :)
Brad
yea, I've seen some of Jim's work and it is very top notch! A friend of mine is bringing his boat over to Ace next week.

[Mrs Luvnlife]

Anybody have a recommendation? I live in the bay area.The fiberglass/gelcoat looks like it is falling apart at the lower outer portion of the passenger sponson,right by the cavatation plate.I'll try to post some pictures.I can't figure out what could've caused it. Any ideas? Thanks
Absolutely, without a doubt---Jeff @ Smooth as Glass! We hauled our boat up there from Castaic (with kids in tow :jawdrop:) and I think our haul time was 5-6 hours....can't remember. All I can say is you will not be disappointed and it's worth whatever your drive time is ;) !!

[MOBrien]

Gets my recommendation. Jeff and his crew are great to work with and produce very nice work. I had them do a complete re-gel on the bottom of my sled and it came out great. Couldn't be happier.
Good luck!

[Robbie Racer]

Anybody have a recommendation? I live in the bay area.The fiberglass/gelcoat looks like it is falling apart at the lower outer portion of the passenger sponson,right by the cavatation plate.I'll try to post some pictures.I can't figure out what could've caused it. Any ideas? Thanks
I agree that you can't go wrong with Smooth as Glass. I dropped my Carrera off there last Thursday to fix some gouges that I put in the bottom at Shasta. It took me 2 hours to get to Gilroy (going south on I-5 to 152 to 101).

[Washed Ashore]

Jeff Glow...Smooth As Glass Riverbank, Ca They don't get no better than Jeff!! 209 869-3545
Hey,
I know this guy Jeff,I heard he's O.K.:)
Jeff

[NICE PAIR]

Hey,
I know this guy Jeff,I heard he's O.K.:)
Jeff
"Who did you hear that from?":D

[TUNNEL T]

"Who did you hear that from?":D
from some big mexican guy ! tortillas for all ! T

[DSIDan]

Jeff is the best, quality control second to none, with an honest work ethic.
By the way I drive from Hayward to Merced (45min past Riverbank) everyday for the last year, it takes 2.25 in the AM (7-9) and 2.5 PM (5-7) Take 132 and stay off of 205!:D

[Boat211]

tortillas for all ! T
How about a tequila and vodka sundae to go with that? Oh and by the way...Jeff is the best in the business!!!!