PDA

View Full Version : Can someone point me in a direction to find some parts?



mbroome
07-19-2007, 03:15 AM
I need help in locating the following at a reasonable price guys!
I have a 79 Wellcraft 21 foot I/o with a 305 800 stringer.
Looking for a source with the following!
1) trim motor brushes
2) shift assist box
tia for the help guys!

Cas
07-19-2007, 07:07 AM
give Rex Marine a try. If they don't have they will tell you where to go.
www.rexmar.com

Classic Daycruiser
07-19-2007, 09:14 AM
Take the trimm motor to a shop that rebuilds electrical motors. They can also rebuild the motor if needed. Remember this is a marine application so there are some differences in motors.

mbroome
07-20-2007, 02:48 AM
ty folks! I also have a broken bolt on my water manifold. Took me all of 10 minutes to get it off the block and sitting on the ground. It'll be at the machine shop this morning! The trim motor, OMG. I worked on it for an hour last night trying to get the thing off. Its up underneath the motor mount and is held on by two screws. I finally got the motor wound all the way up, got one screw out. The left side screw underneath the motor mounbt is a BIOTCH to get off! I got it just hanging there and gave up in disgust last night. Seems the only EASY way to get the thing off is to pull the entire front of the motor loose and jack it up, exposing the trim motor and screws (which i refuse to do, seems silly!). ah well, offset screwdrivers are your friend!