74_schiada_flat
07-19-2007, 11:34 PM
FIRST OF ALL THE PRICE IS $3600 NOT $3800 TYPO!
ok here it goes...
i'm trying not to sell this but i'm putting it out there just incase......!
MOTOR WAS FINISHED 2 DAYS AGO!
SEASOND GM 4 BOLT MAIN MARK 4 TALL DECK TRUCK BLOCK!
.60 OVER "CAN GO .125"
ALL NEW MACHINE WORK EVERYTHING DONE RIGHT!
TOURQUE PLATED, CLEARANCED, EPOXY FILLED ETC.... ETC... ETC...!
NEW SCAT FORGED 4340 CRANK INTERNALY BALLANCED
"BY A FREIND ON HIS $65,000 CNC BALANCING MACHINE"
NEW PROBE 4340 FORGED LIGHTWIEGHT CNC MACHINED RODS W/ ARP 2000's LONG RODS!
"LIGHTER & STRONGER THAN SCAT H-BEAMS"
NEW PROBE SRS "SPORTSMAN RACE SERIES" 10.5 TO 1 PISTONS
"LIGHTER THAN SRP'S"
ALL THE BEST BEARINGS AND BOLTS USED
BUILT BY A FREIND OF MINE THAT WORKED IN THE ENGINE ROOM AT PROBE
FOR A LLLLOOONNNNGGGGGGG TIME AND NOW DESIGNS THEIR PISTONS,
AND BUILDS RACE MOTORS FOR MANY TEAMS ACROSS THE BOARD
NOT SOME BACK YARD BOOGIER!
I LOOKED EVERYWHERE AND THE CHEAPEST I FOUND ANY 496 SHORT BLOCK FOR WAS ON EBAY AND THEY ARE USING CAT NOT SCAT
CRANKS AND RODS.....
"HEARD THEY WERE THE WORST QUALITY AND HARD TO BALANCE"
AND NOT A TALL DECK TRUCK BLOCK
NORE BALANCED AND BUILT BY CLOSE FREINDS OF MINE FOR WAS..... $3450 PLUS SHIPPING AND SALES TAX WHICH WOULD BRING IT WAY PASSED $4000
I ALSO HAVE DART PRO 1 HEADS BRAND NEW IN THE BOX FOR........... $2000
AND A VERY LIGHTLY USED FULL SOLID ROLLER SETUP..
COMP CAMS 670 SOLID ROLLER CAM
COMP CAMS ROLLER LIFTERS
CRANE GOLD 1.7 ROLLER ROCKERS
FOR AN ADITIONAL
"IF PURCHASED WITHCOMPLETEPACKAGE"...................................$400
I WILL THROW IN ARP HEAD STUDS AND A GOOD FEL PRO GASKET KIT!
"ALL NEW" 4340 FORGED 496 10.2 TALL DECK, LONG ROD, ALUMINUM HEAD, SOLID ROLLER MOTOR FOR............................................... ....$6000
MIGHT! CONSIDER TRADES FOR.....
LOW MILEGE TACOMA, WRANGLER, SILVERADO, ETC...STREET BIKE,
OR ANYTHING ELSE I CAN DRIVE WHILE I SELL!
ok here it goes...
i'm trying not to sell this but i'm putting it out there just incase......!
MOTOR WAS FINISHED 2 DAYS AGO!
SEASOND GM 4 BOLT MAIN MARK 4 TALL DECK TRUCK BLOCK!
.60 OVER "CAN GO .125"
ALL NEW MACHINE WORK EVERYTHING DONE RIGHT!
TOURQUE PLATED, CLEARANCED, EPOXY FILLED ETC.... ETC... ETC...!
NEW SCAT FORGED 4340 CRANK INTERNALY BALLANCED
"BY A FREIND ON HIS $65,000 CNC BALANCING MACHINE"
NEW PROBE 4340 FORGED LIGHTWIEGHT CNC MACHINED RODS W/ ARP 2000's LONG RODS!
"LIGHTER & STRONGER THAN SCAT H-BEAMS"
NEW PROBE SRS "SPORTSMAN RACE SERIES" 10.5 TO 1 PISTONS
"LIGHTER THAN SRP'S"
ALL THE BEST BEARINGS AND BOLTS USED
BUILT BY A FREIND OF MINE THAT WORKED IN THE ENGINE ROOM AT PROBE
FOR A LLLLOOONNNNGGGGGGG TIME AND NOW DESIGNS THEIR PISTONS,
AND BUILDS RACE MOTORS FOR MANY TEAMS ACROSS THE BOARD
NOT SOME BACK YARD BOOGIER!
I LOOKED EVERYWHERE AND THE CHEAPEST I FOUND ANY 496 SHORT BLOCK FOR WAS ON EBAY AND THEY ARE USING CAT NOT SCAT
CRANKS AND RODS.....
"HEARD THEY WERE THE WORST QUALITY AND HARD TO BALANCE"
AND NOT A TALL DECK TRUCK BLOCK
NORE BALANCED AND BUILT BY CLOSE FREINDS OF MINE FOR WAS..... $3450 PLUS SHIPPING AND SALES TAX WHICH WOULD BRING IT WAY PASSED $4000
I ALSO HAVE DART PRO 1 HEADS BRAND NEW IN THE BOX FOR........... $2000
AND A VERY LIGHTLY USED FULL SOLID ROLLER SETUP..
COMP CAMS 670 SOLID ROLLER CAM
COMP CAMS ROLLER LIFTERS
CRANE GOLD 1.7 ROLLER ROCKERS
FOR AN ADITIONAL
"IF PURCHASED WITHCOMPLETEPACKAGE"...................................$400
I WILL THROW IN ARP HEAD STUDS AND A GOOD FEL PRO GASKET KIT!
"ALL NEW" 4340 FORGED 496 10.2 TALL DECK, LONG ROD, ALUMINUM HEAD, SOLID ROLLER MOTOR FOR............................................... ....$6000
MIGHT! CONSIDER TRADES FOR.....
LOW MILEGE TACOMA, WRANGLER, SILVERADO, ETC...STREET BIKE,
OR ANYTHING ELSE I CAN DRIVE WHILE I SELL!