props

[speedski]

I have a 21 foot superboat with a 235 Everude on the back. i am looking for a good ski prop with plenty out of the hole(planes fast) and will not loose too much top end. any ideas.

[XFactor]

I have a 23 pitch 5 bladed stainless prop that worked grat for a 20.6 Lavey with a 225 Yamaha. Let me know if you would like to give it a try. The pro is in Havasu now. I could have it back to Orange County in a couple weeks. Where are you located?

[HavasuDreamin']

Three blade, round ear, over-the-hub stainless. :cool: :cool: :cool:

[Boat Racer]

HavasuDreamin':
Three blade, round ear, over-the-hub stainless. :cool: :cool: :cool: just get one with the blow-out holes, this will let the motor pick up rpm's, to get you out of the hole, and not experience a loss of top- end!

[wideopen23]

DO they make props with holes in them allready or do you have to have them done?

[MAXIMUS]

Stainless 4 blade legend "A" works pretty well... :p

[HavasuDreamin']

MAXIMUS:
Stainless 4 blade legend "A" works pretty well... :p Yeah, but you need like 1,200 hp to break 60 mph........ :p
Originally posted by BOAT RACER:
just get one with the blow-out holes, this will let the motor pick up rpm's, to get you out of the hole, and not experience a loss of top- end! Over the hub props don't need holes. Thru hub props do. I would suggest an over the hub prop for an O/B application (unless 300X in which case the thru-hubs seem to work well).
[ April 03, 2003, 11:35 AM: Message edited by: HavasuDreamin' ]

[wideopen23]

Can you school me a little in props. I have an 18.5 foot hull with a 1989 evinrude 200. Looking for top end speed but dont want to kill
out of the whole. I am running a 4 blade SS 23 pitch. Does ok but I would like to try something else any suggestions?

[wideopen23]

Can you school me a little in props. I have an 18.5 foot hull with a 1989 evinrude 200. Looking for top end speed but dont want to kill
out of the whole. I am running a 4 blade SS 23 pitch. Does ok but I would like to try something else any suggestions?

[Boat Racer]

HavasuDreamin':
MAXIMUS:
Stainless 4 blade legend "A" works pretty well... :p Yeah, but you need like 1,200 hp to break 60 mph........ :p
Originally posted by BOAT RACER:
just get one with the blow-out holes, this will let the motor pick up rpm's, to get you out of the hole, and not experience a loss of top- end! Over the hub props don't need holes. Thru hub props do. I would suggest an over the hub prop for an O/B application (unless 300X in which case the thru-hubs seem to work well). I TOTALLY disagree, come and let me show you how quick a 23 pitch, with blow-out holes, yanks a person out of the water..Thru hub exhaust or not!This is the best prop for that rig...
[ April 03, 2003, 04:02 PM: Message edited by: Boat Racer ]

[Boat Racer]

WIDEOPEN23: A TOP END PROP WITH SOME BITE,I WOULD SAY A ROUND EAR 3-BLADE..A CHOPPER, PROBABLY A 25 PICH, TO GET THE TOP END IT NEEDS TO BE CUT..
[ April 03, 2003, 04:08 PM: Message edited by: Boat Racer ]

[O.B eddie]

speedski:
I have a 21 foot superboat with a 235 Everude on the back. i am looking for a good ski prop with plenty out of the hole(planes fast) and will not loose too much top end. any ideas. Ever heard of nitrous I think this will be the cure to your prop woes. Nothin but a good time on mine whoopin all the jet boats!! Hee Haww :D

[MAXIMUS]

O.B eddie:
speedski:
I have a 21 foot superboat with a 235 Everude on the back. i am looking for a good ski prop with plenty out of the hole(planes fast) and will not loose too much top end. any ideas. Ever heard of nitrous I think this will be the cure to your prop woes. Nothin but a good time on mine whoopin all the jet boats!! Hee Haww :D Sounds like you been whoopin yourself a little to much again... eh... you biotch you, long time no f**k with... I see your IQ is still impressive! Nitrous is for motors...ok good. Now lay off the crack, & pipe (skin related) & say something cool. Like... heeee hawwww or something. :) Somebody said you went soft...is that true???

[MAXIMUS]

HavasuDreamin':
[QUOTE]Originally posted by MAXIMUS:
[qb] Stainless 4 blade legend "A" works pretty well... :p Yeah, but you need like 1,200 hp to break 60 mph........ :p
Now that is totally not true... I happen to have 850 horse powers & have done better than 60!!!
All this bad info creates guys like O Behave Eddie. Its our job to stop the madness!!! argue

[CATDADDY]

i have a 24 pitch hill chooper in box.fits mercury,great price.

[Screaming Pete]

CATDADDY:
i have a 24 pitch hill chooper in box.fits mercury,great price. How do you like your Cougar? and what prop did you end up using

[BP1330]

How much for the 24 chopper?